Philips 52pfl8605k User Manual

							5.6SD card
Memory  size
To  download rented  videos from Net TV,  you  need to  insert an  SD
memory card  in  the  TV  SD card  slot. Once formatted, leave the  card
permanently in  the  slot.
SD memory size
We  recommend an  SDHC  (High Capacity)  Class 2 card  with  a
minimum  of  4GB memory. For HD movies,  a  minumum of  8GB
memory.
Read more about  renting videos in   Help > Use your TV  > Net  TV
>  Video  stores .
Insert the card
Make  sure to  unlock the  SD memory card  before you  insert it.
To  format  the  SD card,  switch on  the  TV  and  insert the  SD card  in
the  SD card  slot .  The TV  will  automatically  start formatting.  Leave
the  SD card  permanently in  the  slot.
Connections /  SD card 71
 
						

							5.7Common Interface CAM
CAM
Scrambled  digital  TV  channels can be  decoded with  a Conditional Access
Module ( CAM). Digital TV  service  operators  provide  the  CAM when you
subscribe to their services. Contact a digital  TV  service  operator for more
information  and to see  terms  & conditions.
Insert  a  CAM
Switch off  the  TV  before inserting  a  CAM.
Look on  the  CAM for  the  correct method  of  insertion. Incorrect
insertion  can  damage the  CAM and  the  TV.
Look for  the   common interface  slot  on  the  back  of  the  TV.  Gently
insert the  CAM as  far as  it will  go and  leave it in  the  slot
permanently.
It  can  take a  few  minutes before the  CAM is activated. Removing the
CAM will  deactivate the  service  on  TV.
Watching a  CAM service
If  a  CAM is inserted and  subscription  fees have been paid, the  TV
shows  the  programme  from the  digital TV  service  provider. The
applications, their function,  the  content  and  the  onscreen  messages
all come from the  CAM service.
CAM settings
To  set passwords  or PIN codes for  the  CAM service,  press   h >
Setup  > Channel settings  > Common  Interface .  Select  the  CAM
provider and  press   OK.
CI+
This  TV  can  handle  the   CI+ conditional access.
CI+ allows service  providers  to  offer  premium HD digital
programmes  like  movies  and  sports with  a  high  level  of  copy
protection.
To  insert a  CI+ CAM, read the  chapter  CAM - Conditional Access
Module.
72 Connections /  Common Interface CAM
 
						

							5.83D
3D
This  TV  is prepared for  the  3D Full HD accessory PTA02 (sold
separately).
PTA02  Installation
1 Switch off  the  TV.
2  Connect the  3D transmitter  to  the  3D connection   3D Out on  the
back  of  the  TV.
3  Install the  3D transmitter  on  the  top  or at the  bottom of  the  TV.
Make  sure to  point  the  transmitter  directly  to  where you  sit  to
watch  TV.
The small  window in  the  middle of  the  glasses receives the  3D
signals  from the  transmitter.
Update the TV software
To  prepare your  TV  for  3D watching, you  must  update the  TV
software. 
1  Switch on  the  TV.
2  Plug  in  the  USB  device in  the   USB connection  at the  side  of  the
TV.
3  The software update will  start automatically  and  during  the  update
the  TV  might  switch off  and  on  again. Do  not  press  any  key on  the
remote control and  wait until the  message ‘Operation  Successful’
appears.
4  Unplug the  USB  device and  switch the  TV  off  and  back  on  again.
Your  TV  is ready to  watch  3D.
Connections /  3D 73
 
						

							6
6.1
Troubleshooting
Contact information
If  the  advice  and  suggestions in  Troubleshooting do not  help  resolve
the  problem,  try switching the  TV  off  and  back  on  again.
Warning
If  your  TV  breaks  down,  NEVER try to  repair  the  TV  yourself.
Consumer Care
If  the  TV  problem is not  solved you  can  call the  Philips   Consumer
Care  hotline  in  your  country.  Look up the  TV  model and  serial
number before you  call. Find the  telephone number on  the
documentation that  came  with  the  TV.  Or consult our  website
www.philips.com/support
TV model  number and  serial number
Find these  numbers  on  the  packaging label or on  the  type label on
the  back  or bottom of  the  TV.
74 Troubleshooting /  Contact information
 
						

							6.2TV and remote control
The TV does  not switch  on
• Switch the  TV  off  and  on  again with  the  switch on  the  bottom of
the  TV.
• Check the  power cable  connection.
• Try using the  keys  on  the  TV  to  switch on.
The TV does  not switch  on from standby
• Check that  the  batteries of  the  remote control are not  empty or
weak. Check their + /  - orientation.
• Try using the  keys  on  the  TV  to  switch on.
The TV does  not respond to the remote  control
• Check that  the  batteries of  the  remote control are not  empty or
weak. Check their + /  - orientation.
• Clean  the  remote control and  TV  sensor lens.
• During  start-up,  which can  take up to  two minutes with  connected
devices,  the  TV  and  some external  devices  do not  immediately
respond to  commands  from the  remote control. The device is
functioning  normally  and  is not  broken.
The TV switches off and  the red light  blinks
• Switch the  TV  off  and  on  again with  the  switch at the  bottom of
the  TV.  Check if  there is enough  space  for  ventilation. Wait  until the
TV  has  cooled  down.
If  the  TV  does not  restart  from standby  and  the  blinking occurs
again, call Consumer Care.
You forgot  your code to unlock  Child lock ?
Read Help > More on … > Locks  and  timers > Child lock .
Troubleshooting /  TV  and  remote control 75
 
						

							6.3TV channels
Some  TV channels  are gone
• Check if  the  correct list  is selected in  the  Channel list. With  the
Channel list  on  screen, press   o (Options) and  select the  list  you
need with   Select list.
• A  channel could be hidden  in  the  Channel list. Read more about
Channel list  in   Help > Use your TV  > Menus > Browse .
No digital  channel found during installation
• Check if  the  TV  supports DVB -T or DVB -C  in  your  country.
Check the  Digital  TV  Country  Compatibility  sticker on  the  back  of
the  TV.
76 Troubleshooting /  TV  channels
 
						

							6.4Picture and sound
No picture
• Check if  the  antenna  is connected properly.
• Check if  the  correct device is selected and  connected properly.
• Check the  contrast or brightness  setting in   h > Setup  > TV
settings  > Contrast  or Brightness .
The picture  is  poor
• Bad weather can  influence the  picture quality.
• Check if  the  antenna  is connected properly.
• Non-earthed  audio devices,  neon  lights, high  buildings  or
mountains can  influence the  picture quality.  Try to  improve the
picture by  changing  the  position  of  the  antenna  or placing devices
away from the  TV.
• Check that  the  correct TV  system  is chosen  in  the  Manual
installation  menu.
• If  only a  certain channel is poor,  try to  fine tune  this  channel with
the  Fine  tune  menu. Read  Help > Setup  > Channels  > Manual
installation - Analogue .
The picture  has poor colour
• Check the  colour  settings in   h > Setup  > TV settings .  Or press
s  (Adjust)  to  select a   Smart picture setting.
Picture delay when  a  game  console is  connected
• To  prevent  picture delay,  press   s (Adjust),  select  Smart picture
>  Game .
The TV does  not remember  my settings when  I switch  it back  on
• Check whether  the  TV  is set to  the   Home location.  Press   s >
Setup  > TV settings  > Preferences  > Location.
The picture  does  not fit the screen
• Press   s (Adjust),   Picture format  and  select Auto fill.
The picture  position  on screen  is  not correct
• To  correct a  shifted picture, press   s (Adjust)  and  select  Picture
shift .  Use  the  navigation keys  to  adjust  the  picture position. Press
OK  to  stop Picture shift.
• If  distorted  screen edges are visible,  press   h > Setup  > TV
settings  > Picture  > Screen edges  and  use the  slider bar  to  enlarge
the  picture slightly.
There is  a  picture  but no sound
• Check the  volume is not  set to  0.
• Check the  sound has  not  been muted with   m.
• Check that  all cables are connected properly.
• If  no  sound signal is detected, the  TV  automatically  switches off
sound. This  is proper operation and  is not  a  malfunction.
The sound  is  poor
• Try any  Smart sound setting, press   s (Adjust),   Smart sound .
• Check that  the  sound is set to  Stereo.
The sound  comes from one  speaker only
• Check the  Balance setting. Press   h > Setup  > TV settings  >
Sound  > Balance .  Use  the  slider bar  to  set the  balance.
Sound  delay
• If  there is an  audio to  video sync  mismatch when  sound comes
from a  Home  Theatre System, an  audio sync  delay  needs to  be set
up.  Read more about  Audio to  Video sync  in   Help > Setup  >
Devices  > Audio  to Video  sync .
Troubleshooting /  Picture and  sound 77
 
						

							6.5Devices
HDMI  connections
• The HDMI -HDCP procedure  might  take a  few  seconds before the
picture from a  device appears.
• If  the  TV  does not  recognise the  device and  there is no  picture, try
switching from one  device to  another and  back  again to  restart  the
HDCP procedure.  Or switch the  device off  and  back  on  again.
• If  sound interruptions  occur  persistently, see the  user manual of  the
device to  check the  output settings. If  that  does not  help,  connect an
additional  audio cable.
• If  a  DVI to  HDMI  adaptor is used,  check that  an  additional  audio
connection  is in  place  to  complete  the  DVI connection.
EasyLink  HDMI -CEC
• Check if  the  connected device supports the  HDMI -CEC  standard
and  is properly set up.  Read the  user manual that  comes with  the
device.
• Check if  the  HDMI  cable  is properly connected.
• Check if  EasyLink  on  the  TV  and  device is switched  on.
• Make  sure that  the  System audio control in  your  HDMI -CEC  audio
devices  is properly set up.  Read the  user manual that  comes with
your  audio device.
PC display
• The refresh rate of  a  PC  connected to  the  TV  with  VGA or DVI
to  HDMI  adapter should set to  60Hz.
• Check that  the  correct resolution mode is selected on  your  PC.
See  the  list  in   Help > Specifications  > Display  resolutions .
78 Troubleshooting /  Devices
 
						

							6.6Multimedia
The files on my USB device are not shown
• Set your  device (camera)  to  ‘Mass  Storage Class’  compliant.
• The USB  device may  need specific driver  software. Unfortunately,
this  software cannot  be downloaded to  your  TV.
• Not  all audio and  picture files  are supported. See  the  list  in   Help >
Specifications  > Multimedia .
Files  from a  USB device do not play  back  smoothly
• The transfer performance  of  the  USB  device limits the  transfer rate.
The files on my PC are not shown
• To  look  for  files  on  your  home  network  with  Browse  PC,  your  PC
media server software should be set up to  share the  files  with  the
TV.  See  the  list  of  compatible Media server software in   Help >
Specifications  > Multimedia .
Troubleshooting /  Multimedia 79
 
						

							6.7Network
Net  TV does  not work
• If  the  connection  to  the  router is OK,  check the  router connection
to  the  Internet.
Browse  PC or  Net  TV work slow
• You  need a  high -speed Internet connection  for  your  router.
80 Troubleshooting /  Network