Philips 47pfl7456k User Manual

     
EN      41   
English
 Reinstall channels 
ATTENTION: This feature is intended for 
dealers and service personnel. 
You can copy channel lists from one Philips 
TV to another through a USB storage 
device. You do not need to search for 
channels or install them again on the second 
TV. The channel list file is small enough to fit 
on any USB storage device. 
What you need 
The two Philips TVs must have: 
 the same country setting, 
 the same year range,  
 the same DVB type, as indicated by the...

  
EN      42       
Menu language 
1. While you watch TV, press . 2. Select [Setup] > [TV settings] > 
[Preferences] > [Menu language]. 
3. Select a menu language from the list, then press OK. 
Other settings 
TV demo 
Start a demo to find out more about your 
TVs features. 
Note: Demos are not supported on MHEG 
channels. 
1. While you watch TV, press . 2. Select [Setup] > [Watch demos], then 
press OK. 
3. Select a demo, then press OK. 
4. Press  to exit. 
Update software 
TV software 
Check software...

     
EN      43   
English
 
Update from digital broadcast 
When available, your TV can receive 
software updates through digital broadcasts. 
A message appears prompting you to update 
the software. We strongly recommend that 
you update the software when prompted.  
Follow the instructions on screen. 
Note: If you choose to update the software 
at a later time, select > [Setup] > [Software 
settings] > [Local updates].  
Onscreen Help 
What you need 
Before you update the onscreen [Help], 
make sure...

  
EN      44       
5 Connect your 
TV 
About cables 
Cable quality  
Overview 
Before you connect devices to the TV, check 
the available connectors on the device. 
Connect the device to the TV with the 
highest quality connection available. Good 
quality cables ensure a good transfer of 
picture and sound. 
The connections shown in this user manual 
are recommendations only. Other solutions 
are possible. Tip: If your device only has composite or 
RCA connectors, use a SCART-cinch 
adapter to connect...

     
EN      45   
English
 SCART 
A SCART cable combines video and audio 
signals. 
SCART connectors can handle RGB video 
signals but cannot handle high-definition 
(HD) TV signals. 
  
VGA 
Use this connection to display PC content 
on the TV. 
For video and sound, use the VGA and 
AUDIO IN connectors. 
  
Connect devices 
Overview 
You can connect your devices to the TV with any of the following options. After connection, press  > [Add your devices]. 
  
    

  
EN      46       
Blu-ray or DVD disc player 
Connect the disc player with an HDMI cable to the TV.  
   
Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.  
  
TV receiver 
Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on 
certain models only.) 
 
    

     
EN      47   
English
 
  
Connect the satellite or digital TV receiver with an HDMI cable to the TV. 
   
Connect the satellite or digital TV receiver with a SCART cable to the TV. 
   
Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R 
cable to the TV. 
  
    

  
EN      48       
Recorder 
Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) 
   
Connect the recorder with a SCART cable to the TV. 
   
Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
 
 
 
  
    

     
EN      49   
English
 Game console 
The most practical connectors for a game 
console are on the side of the TV. However, 
you can also use the connectors at the back 
of the TV. 
 
 
For the best gaming experience, set the TV 
to game mode. 
1. Press  ADJUST. 
2. Select [Smart picture] > [Game], then 
press OK. 
3. To exit, press .  
 
Connect the game console with an HDMI cable to the TV. 
   
Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
  
   

  
EN      50       
Home theatre system 
Connect the home theatre with an HDMI cable and an optical or coaxial audio cable to the TV. 
(Optical audio output is available on certain models only.) 
   
Connect the home theatre with a SCART cable to the TV. 
   
Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV.