Philips 47pfl7456k User Manual

     
EN      31   
English
 
Change the clock mode 
The clock mode is automatically 
synchronised to the Coordinated Universal 
Time (UTC). If your TV cannot receive UTC 
transmissions, change the clock mode to [Manual]. 
1. While you watch TV, press . 2. Select [Setup] > [TV settings] > 
[Preferences]. 
3. Select [Clock] > [Auto clock mode].   
4. Select [Automatic], [Manual] or [Country 
dependent], then press OK. 
Enable or disable daylight saving 
If clock mode is set to [Country 
dependent], you...

  
EN      32       
View subtitles 
Analogue channels 
1. Switch the TV to an analogue TV channel. 2. Press TEXT. 
3. Enter the three-digit page number of the 
subtitles page (usually 888). 
4. Press  to exit teletext.   
Subtitles display if available.  
Digital channels 
1. Press  OPTIONS. 
2. Select [Subtitles], then press OK. 
3. Select [Subtitles off], [Subtitles on] or 
[On during mute], then press OK. 
Note: 
 If MHEG application is activated, 
subtitles are not displayed.  
 If you select [On...

     
EN      33   
English
 Set Scenea lounge light 
When the TV is in standby, you can switch 
on Ambilight and create a lounge light effect 
with your wallpaper. Ambilight is available on 
certain models only. 
When the TV is in standby, press AMBILIGHT on the front of the TV.  
Note: It can take more than 5 seconds for 
the lounge light to switch on. 
To select another colour for the lounge light, see Use your TV > Ambilight > Setup (Page 
20). 
Set universal access 
Switch on 
Some digital TV...

  
EN      34       
Use EasyLink 
What you can do 
Get the most out of your HDMI-CEC 
compliant devices with Philips EasyLink 
enhanced control features. If your HDMI-
CEC compliant devices are connected 
through HDMI, you can control them at the 
same time with your TV remote control . 
Note: Other brands describe HDMI-CEC 
functionality differently. Some examples are 
Anynet (Samsung), Aquos Link (Sharp) or 
BRAVIA Sync (Sony). Not all brands are fully 
compatible with Philips EasyLink. 
After you...

     
EN      35   
English
 Control devices simultaneously 
If you connect multiple HDMI-CEC devices 
that support this setting, all the devices 
respond to the TV remote control. 
Caution: This is an advanced setting. Devices 
that do not support this setting will not 
respond to the TV remote control. 
1. Press . 2. Select [Setup] > [TV settings] > 
[EasyLink]. 
3. Select [EasyLink Remote Control] > 
[On] or [Off]. 
4. Press OK to activate.    Notes: 
To switch back to TV control, press , then select...

  
EN      36       
Retain picture quality 
If your TV picture quality is affected by the 
picture-processing features of other devices, 
switch on Pixel Plus Link. 
To switch on Pixel Plus Link 
1. Press . 2. Select [Setup] > [TV settings] > 
[EasyLink]. 
3. Select [Pixel Plus link] > [On], then press 
OK.  
Maximize video display 
Some subtitles can create a separate subtitle 
bar under the video, which limits the video 
display area. After you switch on auto 
subtitle shift, the subtitles display...

     
EN      37   
English
 4 Set up your TV 
Settings assistant 
Use the settings assistant to guide you 
through the picture and sound settings. 
1. While you watch TV, press . 2. Select [Setup] > [Quick picture and 
sound settings], then press OK. 
3. Select [Start], then press OK.   
4. Follow the onscreen instructions to 
choose your preferred settings. 
Picture and sound 
More picture settings 
1. Press . 2. Select [Setup] > [TV settings] > 
[Picture], then press OK. 
3. Select a setting to...

  
EN      38       
Digital TV channels can stream several audio 
languages. If multiple languages are available, 
select the preferred language.  
1. Press . 2. Select [Setup] > [Channel settings] or 
[Satellite settings] > [Language]. 
3. Select one of the following settings, then press OK: 
 [Primary audio] / [Secondary audio]: 
Select the available audio language. 
Set a secondary language in the same 
menu. If the primary language is 
unavailable, the TV receives this 
language. 
 [Preferred...

     
EN      39   
English
 Update channel list 
When the TV was switched on for the first 
time, a full installation of channels was 
performed. 
You can automatically add or remove digital 
channels or manually update channels. 
Note: If you are prompted to enter a code, 
enter 8888. 
Automatic update 
To automatically add or remove digital 
channels, leave the TV in standby mode. The 
TV updates channels and stores new 
channels everyday. Empty channels are 
removed from the channel list. 
If a...

  
EN      40       
Step 2: Search and store new TV channels 
1. In the [Analogue: Manual installation] 
menu, select [Find channel], then press OK. 
2. Select one of the following options: 
 Press the Navigation buttons or 
Numeric buttons to manually enter the 
channel frequency. 
 Select [Search] then press OK to 
search for the next channel 
automatically. 
3. When the correct channel frequency is entered, select [Done], then press OK. 
4. Select [Store as new channel], then press 
OK to store the...