Philips 47pfl7456h User Manual

     
EN      51   
English
 Digital camera 
Connect the digital camera with a USB cable to the TV.  
  
Digital camcorder 
Connect the digital camera with an HDMI cable to the TV. 
   
Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. 
  
    

  
EN      52       
Connect more devices 
External hard disk 
Connect the external hard disk with a USB cable to the TV. 
  
Computer 
Connect the computer with an HDMI cable to the TV. 
   
Connect the computer with a DVI-HDMI cable to the TV. 
 
    

     
EN      53   
English
 
  
Connect the computer with a VGA cable and an audio cable to the TV. 
  
Computers and the 
Internet 
What you can do 
Network benefits 
If you connect your TV to a computer 
network with storage devices such as 
computers, you can play the photos, music and videos on your devices. See Use your 
TV > Browse PC through DLNA (Page 20). 
If you connect your TV to a computer 
network with Internet access, you can access 
Net TV content. For more information about Net TV, see...

  
EN      54       
Connect  
 
1. Switch on the router and switch on its 
DHCP setting. 
2. With the ethernet cable, connect the 
router to the TV. 
Alternatively, you can also connect the 
router to the TV wirelessly, through a 
wireless USB adaptor (not included). See Connect your TV > Computers and the 
Internet > Wireless LAN ready (Page 54). 
3. Press , select [Setup] > [Connect to 
network], then press OK. 
4. Follow the onscreen instructions to install 
the network. 
5. Wait for the TV to find...

     
EN      55   
English
 
Scan for routers 
If you have several routers in your network, 
you can select the network you need. To 
select a specific network router, press [Scan]on the first page of the installation.  
The routers with WPS and the strongest 
signal are shown first in the list on screen. 
Select the router you need. If you are connecting a WPS router, select [WPS] on 
the TV. 
 If you have set the PIN code in your router software, select [WPS pincode:] 
and enter the code.  
 To...

  
EN      56       
Start projecting 
To start projecting the PC screen on the TV, 
click on the small TV-like icon in the taskbar 
at the bottom right of the PC screen. Your 
PC screen appears on your TV screen. 
Stop projecting 
To stop projecting, click on the TV icon 
again. 
Project your PC: Help 
To read the Wi-Fi MediaConnect Help, 
right-click the program icon in the 
notification tray of the PC and select Help. 
Specifics 
You can project high-definition (HD) or 
standard-definition (SD) video,...

     
EN      57   
English
 
1. Switch off the TV. 
2. Follow the directions printed on the CAM 
and insert the CAM into the Common 
Interface at the side of the TV. 
3. Push the CAM in as far as it will go, then 
wait for the CAM to be activated. This takes 
a few minutes.   
To prevent digital services from being 
deactivated, do not remove the CAM from 
the slot when it is in use.    
Watch CAM services 
1. After inserting and activating the CAM, press  OPTIONS. 
2. Select [Common interface], then...

  
EN      58       
6 Troubleshooting 
Contact Philips 
 
Warning: Do not attempt to repair the TV 
yourself. This may cause severe injury, 
irreparable damage to your TV or void 
your warranty. 
If you cannot resolve your problem, refer to 
the frequently asked questions (FAQs) for this TV at www.philips.com/support. 
You can also contact Philips Consumer Care 
in your country for support. You can find the 
contact number in the leaflet that 
accompanies the TV. 
Take a note of your TV model and serial...

     
EN      59   
English
 Picture 
The TV is on, but there is no picture or the 
picture is distorted: 
 Make sure that the antenna is properly 
connected to the TV. 
 Make sure that the correct device is 
selected as the display source. 
 Make sure that the external device or 
source is properly connected. 
There is sound but no picture: 
Make sure that the picture settings are set 
correctly. 
There is poor TV reception from an 
antenna connection: 
 Make sure that the antenna is properly...

  
EN      60       
HDMI 
There are problems with HDMI devices: 
 Note that HDCP (High-bandwidth 
Digital Content Protection) support can 
delay the time taken for a TV to display 
content from a HDMI device. 
 If the TV does not recognise the HDMI 
device and no picture is displayed, 
switch the source from one device to 
another and back again. 
 If there are intermittent sound 
disruptions, make sure that output 
settings from the HDMI device are 
correct. 
 If you use an HDMI-to-DVI adapter or...