Philips 47pfl7456h User Manual
Here you can view all the pages of manual Philips 47pfl7456h User Manual. The Philips manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
EN 11 English For 47 inch to 55 inch TVs: Before you wall mount the TV, find the correct length of screw. To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic. Location A range of TV settings are applied to suit the location of the TV. Shop or home mode Set the TV location to Home mode to access all TV settings. In Shop mode, you can access only a few settings. 1. While you watch TV, press . 2. Select [Setup] >...
Page 12
EN 12 2 Use your TV Controls TV controls 1. +/-: Increase or decrease volume. 2. AMBILIGHT: Switch Ambilight on or off. Ambilight is available on certain models only. 3. (Home): Access the Home menu. Press again to launch an activity in the Home menu. Confirm an entry or selection. 4. CH +/-: Switch to the next or previous channel. 5. Power: Switch the TV on or off. Indicators 1. Ambient sensor / remote control sensor Ambient sensor is available on certain...
Page 13
EN 13 English 4. (Home): Access the Home menu. 5. (Navigation buttons): Navigate through menus and select items. 6. CH - / CH + (Previous/Next): Switch channels, navigate through menu pages, tracks, albums or folders. 7. OK: Confirm an entry or selection. 8. (Back): Return to the previous menu page or exit from a TV function. 9. FIND: Access the menu to select TV channel list. 10. ADJUST: Access the menu to adjust settings. 11. SOURCE: Select connected devices....
Page 14
EN 14 The type of battery varies according to RC model: For remote control with AAA batteries (end to end): For remote control with AAA batteries (side by side): For remote control with coin cell batteries: EasyLink controls Note: EasyLink controls are available when the connected device is HDMI-CEC compliant. EasyLink allows you to control your TV and other HDMI-CEC devices with one remote control. Access EasyLink controls 1. While you view content from a...
Page 15
EN 15 English Watch TV Switch TV on or off Switch the TV on Press the power switch at the base of the TV to the ON position. If the TV is in standby, press on the remote control. Note: There is a short delay before the TV responds. Tip: If you cannot find your remote control and want to switch on the TV from standby, press CH +/- on the front of the TV. Though your TV consumes very little energy in standby, it does use some energy. If you are not going to use the TV...
Page 16
EN 16 Switch TV channels Press on the remote control. Press CH +/- on the TV. Press the Numeric buttons to enter a channel number. Manage channel lists You can view all channels, or only your favourites in the channel list. Press FIND to access the channel list. Create a channel list You can create a channel list that contains only your favourite channels. 1. Press FIND. 2. Press OPTIONS. 3. Select [Mark as favourite] or [Unmark as favourite], then press OK....
Page 17
EN 17 English Use TV programme guide options You can customise the displayed information to: Remind you when programmes start Display only preferred channels 1. In the programme guide, press OPTIONS. 2. Select one of these settings, then press OK: [Set reminder]: Set programme reminders. [Clear reminder]: Clear programme reminders. [Change day]: Select the day to display. [More info]: Display programme information. [Search by genre]: Search TV programmes by...
Page 18
EN 18 Watch a connected device Add new device Notes: Before you watch a connected device, you must add its icon to the Home menu. See Connect your TV > Connect device (Page 45). If you connect an HDMI-CEC compliant device to the TV through an HDMI connector and switch it on, the device is automatically added to the Home menu. 1. Connect and switch on the device. 2. Press . 3. Select [Add your devices], then press OK. 4. Follow the onscreen instructions. Select your...
Page 19
EN 19 English Press OPTIONS to access or exit the following picture options: [Show info]: Display the file information. [Stop]: Stop slideshow. [Rotate]: Rotate the file. [Repeat]: Repeat the slideshow. [Play once]: Play the file once. [Shuffle off] / [Shuffle on]: Enable or disable random display of pictures in the slideshow. [Slideshow speed]: Set the display time for each picture in the slideshow. [Slideshow transition]: Set the transition from one...
Page 20
EN 20 Switch on 1. Press ADJUST. 2. Select [Ambilight], then press OK. 3. To switch Ambilight on or off, select [On] or [Off]. You can also press AMBILIGHT on the TV to switch Ambilight on or off. Change settings In the Ambilight menu, you can access more Ambilight settings. 1. While you watch TV, press > [Setup]. 2. Select [TV settings] > [Ambilight]. 3. Select a setting to adjust: [Dynamic]: Adjust Ambilight between relaxed and dynamic levels. Available only if...