Philips 46pfl9704 User Manual

2.1.1      Remote  control  overview2/65 Navigation key
To navigate up, down, left or right.
6 OK key
To open or close the channel overview.
To activate a selection.
7 Back b
To go back or exit a menu without changing a setting.
To go back to the previous TV channel or the previous
teletext page.
To go back to the previous Net TV page.
8 Info i
To open or close channel or programme information, if
available.
...
 

2.1.1      Remote  control  overview3/69 Audio Video keys T, P, Q, S, R
To play multimedia files.
To operate a disc player connected with EasyLink HDMI-
CEC.
10 Volume V
To adjust the volume.
11 Mute m
To mute the sound or restore it.
12 Channel / Programme up and down
To switch to the next or previous channel in the channel
overview.
To switch to the next or previous teletext page.
...
 

2.1.1      Remote  control  overview4/613 TV key
To set the remote control in TV mode.
14 DVD, STB and HTS keys
Universal remote control keys.
15 Colour keys
Easy selection of teletext pages.
To open or close the Demo menu (red key).
16 User manual e (yellow key)
To open or close the user manual
...
 

2.1.1      Remote  control  overview5/617 Format f
To select a picture format.
18 Net TV
To open or close the Net TV start page.
19 Teletext
To switch teletext on or off.
20 Disc menu
To show the disc menu of a disc player connected with an
HDMI cable with EasyLink set to On.
...
 

2.1.1      Remote  control  overview6/621 Number keys
To select a TV channel or enter digits.
22 Subtitle
To open the subtitle on / off menu.
23 Source s
To select a connected device from the Source list.
24 Ambilight
To switch Ambilight on or off.
 

2.1.2      Universal  remote  control1/4Your TV remote control can control other devices such as a
DVD player or a Home Theatre System from Philips or other
brands.
To operate a device with the TV remote control, you need
to set up one of the Universal mode keys for your particular
device.
Once setup is complete, the Universal mode key sets the
remote control to operate the device but the TV screen will
not switch to that device.
...
 

2.1.2      Universal  remote  control2/4DVD, STB or HTS key
Use the DVD key to operate a DVD player or Blu-ray Disc,
the STB key for a set-top box or digital cable receiver and
the HTS key for a Home Theatre System.
As long as the key blinks, you can control the device with
the relevant keys on the remote control.
To return to normal TV control, press TV.
When no key is pressed for 30 seconds, the remote control
switches back to TV control.
Setup for a particular device
To start the Universal mode key...

2.1.2      Universal  remote  control3/4Manual setup
You can manually enter an RC code to set up a Universal
mode key. Look up the appropriate RC code in the
Universal RC code list in this user manual. In the list, look
for the type of device and brand you need. Some brands
have several RC codes available. When setup is performed
manually, try to operate the device with the relevant keys.
If the device does not respond or operates incorrectly and
there is more than 1 code available, you can restart the...

2.1.2      Universal  remote  control4/4Warning
To avoid the loss of stored Universal remote control codes,
do not leave the remote control without battery power for
more than 5 minutes. Also during the replacement of the
batteries, do not press any remote control key.
Dispose of batteries according to the end of use directives.
Read chapter Get started > Important > End of use.
 

2.1.3      Universal  RC  code  list1/26Use Manual setup to enter an RC
code from the list hereafter. Read Get
started > Remote control > Universal
RC code list, Manual setup.
To setup the DVD key, first find the
RC code for your DVD or Blu-ray Disc
player in the DVD codes list.
See the lists for Digital receiver or
Satellite receiver to setup the STB
key. To setup the HTS key, see the
list for Home Theatre System.
Write down the codes for your brand
and device, close the user manual
and try out the...