Philips 46pfl9704 User Manual

1.2.1      Switch  on1/2It takes a couple of seconds for the TV to start up.
If the red standby indicator is off, press O at the right of
the TV to switch it on.
Press O again to switch off.
...
 

1.2.1      Switch  on2/2The white LED flashes during start-up and switches off
completely when the TV is ready for use. The Ambilight
shows the TV is on.
You can set the white LED on permanently or set its
brightness. Press h> Setup > Installation > Preferences >
LightGuide brightness.
 

1.2.2   LightGuideThe LightGuide at the front of the TV indicates whether the
TV is on or is starting up.
In the Setup menu, you can set the LightGuide brightness
or let it switch off after start up.
Press h> Setup > Installation > Preferences > LightGuide
brightness.
 

1.2.3   Volume VThe keys on the side of the TV allow basic TV control.
You can adjust the volume with Volume + / - on the side of
the TV.
 

1.2.4   Programme PThe keys on the side of the TV allow basic TV control.
You can switch TV channels with Program + / - on the side
of the TV.
 

1.2.5   Source keyThe keys on the side of the TV allow basic TV control.
To open the Source list to select a connected device, press
Source s. Press Source s again to select a connected
device in the list. After a few seconds the TV switched to
the selected device.
 

1.2.6   IR sensorAlways take care to point the remote control at the remote
control infra red sensor on the front of the TV.
 

1.3.1   VESA infoYour TV is prepared for VESA compliant wall mounting. A
VESA wall mount bracket is not included. Use the following
VESA code to purchase the bracket.
32” / 81cm VESA MIS-F 200, 200, 6
37” / 94cm VESA MIS-F 200, 200, 6
40” / 101cm VESA MIS-F 400, 400, 6
46” / 116cm VESA MIS-F 400, 400, 8
When mounting the TV on a wall, always use all 4 fixing
points on the back of the TV. Use a screw length as shown
in the drawing.
 

1.3.2   Unmount the standBefore you lift the TV from the stand, unscrew the 4 stand screws on the back of the TV.
 

1.4.1   Full High Definition LCD displayThis TV is equipped with a full High Definition (HD) display.
A full HD 1920x1080p, the highest resolution of HD sources.
This display offers a brilliant flicker free progressive scan
picture with optimum brightness and superb colours.
To enjoy HD TV you need to get programmes in HD first. If
you are not watching HD programmes, the picture quality
will be that of a normal TV.
Read Get started > Important > Enjoy HD TV