Philips 46pfl8605k User Manual

2.1.4      Batteries
1/2
To replace the batteries of the remote control, slide open
the small tray at the bottom of the remote control. Use 2
coin-shaped batteries (Type CR2032 – 3V). Make sure the
+ side of the batteries (top side) point upwards. The small
tray has 2 + indicators.
. . .
 

2.1.4      Batteries
2/2
Remove the batteries if you are not using the remote
control for a long time. Dispose of batteries according to
the end of use directives. Read Help > To begin > Setting up
> End of use.
 

2.1.5   Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth. Never
use substances such as alcohol, chemicals or household
cleaners on the TV or remote control.
 

2.2.1      Home 
h 1/7
With the Home menu, you can start watching TV or a
movie disc or start any other activity. You can add an
activity when you connect a device to the TV.
Press 
h to open the Home menu.
To start an activity, select it with the navigation keys and
press OK.
To close the Home menu, press h again.
. . .
 

2.2.1      Home 
h 2/7
Operate a selected device
The TV remote control can operate a device if the device is
connected with HDMI and has EasyLink (HDMI-CEC).
Read more about EasyLink Remote control in Help > Use
your TV > Remote control > EasyLink Remote control.
. . .
 

2.2.1      Home 
h 3/7
Add a device
Devices connected with EasyLink (HDMI-CEC)
automatically show their activity in the Home menu. A
single device can add several activities. The device must
be connected with an HDMI cable.
If your connected device does not show itself in the Home
menu, EasyLink on the device may be switched off. If your connected device does not have EasyLink (HDMI-
CEC) or is not connected with an HDMI cable, you need
to manually add your device with Add your devices in the
Home menu....

2.2.1      Home 
h 4/7
Add your devices
In the Home menu, select Add your devices and press OK.
Follow the instructions on screen.
The TV asks you to select the device and the connection to
which the device is connected.
The device or its activities are now added to the Home
menu. Rename a device
To rename an added device or activity, press o (Options)
and select Rename. Use the keypad on the remote control
as you do for SMS/text messaging to enter the new name.
. . .
 

2.2.1      Home 
h 5/7
Delete a device
To delete a device or activity from the Home menu, select
the item and press 
o (Options) and then select Remove
this device. If a device or activity keeps appearing in the
Home menu after you deleted it, switch off the EasyLink
setting on the device to prevent this automatic pop-up
appearing again. Read more about EasyLink in Help > Setup > EasyLink
HDMI-CEC.
. . .
 

2.2.1      Home 
h 6/7
Options for a device
To view the available options for a device or activity in
the Home menu, select it and press o (Options). You can
Rename or Remove devices and activities, Reorder the
sequence of them or Restore activities if you deleted one
of several activities of a device. Reorder
To reorder a device or an activity in the Home menu, select
it and press 
o (Options).
1 Select Reorder.
2 With the navigation keys, reposition the device or activity
where you want it. You can...

2.2.1      Home 
h 7/7
3 Press OK to confirm the position. All devices and
activities shift to the right.
You can highlight another device or activity and reposition
it.
To stop Reorder, press 
o (Options) and select Exit reorder. Restore activities
To recall a deleted activity from a device with several
activities, select the device or one of its activities and
press o (Options). Select Restore activities and press OK.
All deleted activities of this device appear again.