Philips 46pfl8605k User Manual

2.1.1      Remote  control  overview
1/51 Standby 
O
To switch the TV on or back to standby.
2 Home 
h
To open or close the Home menu.
3 Navigation key
To navigate up, down, left or right.
4 OK key
To activate a selection.
. . .
 

2.1.1      Remote  control  overview
2/55 Browse 
e
To open or close the Browse menu.
6 Next 
W
To switch to the next channel, page or chapter.
7 Previous 
X
To switch to the previous channel, page or chapter.
8 Options 
o
To open or close the Options menu.
. . .
 

2.1.1      Remote  control  overview
3/59 Back 
b
To go back to the previous channel. To exit a menu without
changing a setting. To go back to the previous Text or Net
TV page.
10 Adjust 
s
To open or close the most used settings like picture,
sound or Ambilight.
11 Volume 
V
To adjust the volume level.
12 Mute 
m
To mute the sound or to restore it.
. . .
 

2.1.1      Remote  control  overview
4/513 Red colour key
To open interactive TV or to select a Text page.
14 Green colour key
To open the Eco settings or to select a Text page.
15 Yellow colour key
To open and close Help or to select a Text page.
16 Blue colour key
To open or close Widgets or to select a Text page.
. . .
 

2.1.1      Remote  control  overview
5/517 Number keys and text keypad
To select a TV channel directly or to enter text.
18 Subtitles 
j
To switch Subtitles on or off.
19 Picture format 
f
To change the Picture format.
To learn how to use the remote control, read Help > To
begin > TV tour > Remote control.
 

2.1.2      EasyLink  Remote  Control
1/4
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and
have it switched on. The device must also be connected
with an HDMI cable. Operate an EasyLink device
To operate such a device with the TV remote control,
select the device -or its activity- in the h
 Home menu
and press OK. The commands of all keys, except the 
h
key, is forwarded to the device.
. . .
 

2.1.2      EasyLink  Remote  Control
2/4
If the key you need is not on the TV remote control, you
can show extra keys on screen with Show remote control. Show remote control keys
To show the device keys on screen, press o (Options) and
select Show remote control. Select the key you need and
press OK.
To hide the remote control keys of the device, press 
b
(Back).
. . .
 

2.1.2      EasyLink  Remote  Control
3/4In general, these keys open the following device menus:
1 Home menu
2 Setup menu
3 Disc menu (disc content)
4 Pop-up menu
5 Options menu
6 Programme guide
7 Media selection
. . .
 

2.1.2      EasyLink  Remote  Control
4/4
Read more about EasyLink in Help > Setup > Devices >
EasyLink HDMI-CEC.
 

2.1.3   IR sensor
Always make sure you point the remote control at the
remote control infrared sensor on the front of the TV.