Philips 46pfl8605h User Manual

5.6SD card
Memory  size
To  download rented  videos from Net TV,  you  need to  insert an  SD
memory card  in  the  TV  SD card  slot. Once formatted, leave the  card
permanently in  the  slot.
SD memory size
We  recommend an  SDHC  (High Capacity)  Class 2 card  with  a
minimum  of  4GB memory. For HD movies,  a  minumum of  8GB
memory.
Read more about  renting videos in   Help > Use your TV  > Net  TV
>  Video  stores .
Insert the card
Make  sure to  unlock the  SD memory card  before you  insert it....

5.7Common Interface CAM
CAM
Scrambled  digital  TV  channels can be  decoded with  a Conditional Access
Module ( CAM). Digital TV  service  operators  provide  the  CAM when you
subscribe to their services. Contact a digital  TV  service  operator for more
information  and to see  terms  & conditions.
Insert  a  CAM
Switch off  the  TV  before inserting  a  CAM.
Look on  the  CAM for  the  correct method  of  insertion. Incorrect
insertion  can  damage the  CAM and  the  TV.
Look for  the   common...

5.83D
3D
This  TV  is prepared for  the  3D Full HD accessory PTA02 (sold
separately).
PTA02  Installation
1 Switch off  the  TV.
2  Connect the  3D transmitter  to  the  3D connection   3D Out on  the
back  of  the  TV.
3  Install the  3D transmitter  on  the  top  or at the  bottom of  the  TV.
Make  sure to  point  the  transmitter  directly  to  where you  sit  to
watch  TV.
The small  window in  the  middle of  the  glasses receives the  3D
signals  from the  transmitter.
Update the TV software
To...

6
6.1
Troubleshooting
Contact information
If  the  advice  and  suggestions in  Troubleshooting do not  help  resolve
the  problem,  try switching the  TV  off  and  back  on  again.
Warning
If  your  TV  breaks  down,  NEVER try to  repair  the  TV  yourself.
Consumer Care
If  the  TV  problem is not  solved you  can  call the  Philips   Consumer
Care  hotline  in  your  country.  Look up the  TV  model and  serial
number before you  call. Find the  telephone number on  the
documentation that  came...

6.2TV and remote control
The TV does  not switch  on
• Switch the  TV  off  and  on  again with  the  switch on  the  bottom of
the  TV.
• Check the  power cable  connection.
• Try using the  keys  on  the  TV  to  switch on.
The TV does  not switch  on from standby
• Check that  the  batteries of  the  remote control are not  empty or
weak. Check their + /  - orientation.
• Try using the  keys  on  the  TV  to  switch on.
The TV does  not respond to the remote  control
• Check that  the  batteries of...

6.3TV channels
Some  TV channels  are gone
• Check if  the  correct list  is selected in  the  Channel list. With  the
Channel list  on  screen, press   o (Options) and  select the  list  you
need with   Select list.
• A  channel could be hidden  in  the  Channel list. Read more about
Channel list  in   Help > Use your TV  > Menus > Browse .
No digital  channel found during installation
• Check if  the  TV  supports DVB -T or DVB -C  in  your  country.
Check the  Digital  TV  Country  Compatibility...

6.4Picture and sound
No picture
• Check if  the  antenna  is connected properly.
• Check if  the  correct device is selected and  connected properly.
• Check the  contrast or brightness  setting in   h > Setup  > TV
settings  > Contrast  or Brightness .
The picture  is  poor
• Bad weather can  influence the  picture quality.
• Check if  the  antenna  is connected properly.
• Non-earthed  audio devices,  neon  lights, high  buildings  or
mountains can  influence the  picture quality.  Try to  improve the...

6.5Devices
HDMI  connections
• The HDMI -HDCP procedure  might  take a  few  seconds before the
picture from a  device appears.
• If  the  TV  does not  recognise the  device and  there is no  picture, try
switching from one  device to  another and  back  again to  restart  the
HDCP procedure.  Or switch the  device off  and  back  on  again.
• If  sound interruptions  occur  persistently, see the  user manual of  the
device to  check the  output settings. If  that  does not  help,  connect an
additional...

6.6Multimedia
The files on my USB device are not shown
• Set your  device (camera)  to  ‘Mass  Storage Class’  compliant.
• The USB  device may  need specific driver  software. Unfortunately,
this  software cannot  be downloaded to  your  TV.
• Not  all audio and  picture files  are supported. See  the  list  in   Help >
Specifications  > Multimedia .
Files  from a  USB device do not play  back  smoothly
• The transfer performance  of  the  USB  device limits the  transfer rate.
The files on my PC are...

6.7Network
Net  TV does  not work
• If  the  connection  to  the  router is OK,  check the  router connection
to  the  Internet.
Browse  PC or  Net  TV work slow
• You  need a  high -speed Internet connection  for  your  router.
80 Troubleshooting /  Network