Philips 46pfl8505k User Manual
Have a look at the manual Philips 46pfl8505k User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5.7Common Interface CAM CAM Scrambled digital TV channels can be decoded with a ConditionalAccess Module (CAM). Digital TV service operators provide the CAMwhen you subscribe to their services. Contact a digital TV serviceoperator for more information and to see terms & conditions. Insert a CAMSwitch off the TV before inserting a CAM.Look on the CAM for the correct method of insertion. Incorrectinsertion can damage the CAM and the TV. Look for the common interface slot on the back of the TV.Gently insert the CAM as far as it will go and leave it in the slotpermanently.It can take a few minutes before the CAM is activated. Removingthe CAM will deactivate the service on TV. Watching a CAM serviceIf a CAM is inserted and subscription fees have been paid, theTV shows the programme from the digital TV service provider.The applications, their function, the content and the onscreenmessages all come from the CAM service. CAM settings To set passwords or PIN codes for the CAM service, press h> Setup > Channel settings > Common Interface. Select theCAM provider and press OK. CI+ This TV can handle the CI+ conditional access.CI+ allows service providers to offer premium HD digitalprogrammes like movies and sports with a high level of copyprotection. To insert a CI+ CAM, read the chapter CAM - ConditionalAccess Module. Connections / Common Interface CAM71
5.83D 3D This TV is prepared for the 3D Full HD accessory PTA02 (soldseparately - only for 40-46PFL8505/8605 and 52PFL8605). PTA02 Installation1 Switch off the TV.2 Connect the 3D transmitter to the 3D connection 3D Out onthe back of the TV. 3 Install the 3D transmitter on the top or at the bottom of theTV. Make sure to point the transmitter directly to where you sitto watch TV. The small window in the middle of the glasses receives the 3Dsignals from the transmitter. Update the TV softwareTo prepare your TV for 3D watching, you must update the TVsoftware. 1 Switch on the TV.2 Plug in the USB device in the USB connection at the side ofthe TV. 3 The software update will start automatically and during theupdate the TV might switch off and on again. Do not press anykey on the remote control and wait until the message ‘OperationSuccessful’ appears.4 Unplug the USB device and switch the TV off and back onagain. Your TV is ready to watch 3D. 72Connections / 3D
6 6.1 Troubleshooting Contact information If the advice and suggestions in Troubleshooting do not helpresolve the problem, try switching the TV off and back on again. WarningIf your TV breaks down, NEVER try to repair the TV yourself. Consumer CareIf the TV problem is not solved you can call the PhilipsConsumer Care hotline in your country. Look up the TV modeland serial number before you call. Find the telephone number onthe documentation that came with the TV. Or consult ourwebsite www.philips.com/support TV model number and serial numberFind these numbers on the packaging label or on the type labelon the back or bottom of the TV. Troubleshooting / Contact information73
6.2TV and remote control The TV does not switch on• Switch the TV off and on again with the switch on the bottomof the TV.• Check the power cable connection.• Try using the keys on the TV to switch on. The TV does not switch on from standby• Check that the batteries of the remote control are not emptyor weak. Check their + / - orientation.• Try using the keys on the TV to switch on. The TV does not respond to the remote control• Check that the batteries of the remote control are not emptyor weak. Check their + / - orientation.• Clean the remote control and TV sensor lens. • During start -up, which can take up to two minutes withconnected devices, the TV and some external devices do notimmediately respond to commands from the remote control. Thedevice is functioning normally and is not broken. The TV switches off and the red light blinks• Switch the TV off and on again with the switch at the bottomof the TV. Check if there is enough space for ventilation. Waituntil the TV has cooled down. If the TV does not restart from standby and the blinking occursagain, call Consumer Care. You forgot your code to unlock Child lock ?Read Help > More on … > Locks and timers > Child lock. 74Troubleshooting / TV and remote control
6.3TV channels Some TV channels are gone• Check if the correct list is selected in the Channel list. With the Channel list on screen, press o (Options) and select the listyou need with Select list. • A channel could be hidden in the Channel list. Read moreabout Channel list in Help > Use your TV > Menus > Browse. No digital channel found during installation• Check if the TV supports DVB-T or DVB-C in your country.Check the Digital TV Country Compatibility sticker on the backof the TV. Troubleshooting / TV channels75
6.4Picture and sound No picture• Check if the antenna is connected properly.• Check if the correct device is selected and connected properly. • Check the contrast or brightness setting in h > Setup > TVsettings > Contrast or Brightness. The picture is poor• Bad weather can influence the picture quality.• Check if the antenna is connected properly.• Non -earthed audio devices, neon lights, high buildings ormountains can influence the picture quality. Try to improve thepicture by changing the position of the antenna or placing devicesaway from the TV. • Check that the correct TV system is chosen in the Manualinstallation menu.• If only a certain channel is poor, try to fine tune this channelwith the Fine tune menu. Read Help > Setup > Channels >Manual installation - Analogue. The picture has poor colour • Check the colour settings in h > Setup > TV settings. Or press s (Adjust) to select a Smart picture setting. Picture delay when a game console is connected • To prevent picture delay, press s (Adjust), select Smartpicture > Game. The TV does not remember my settings when I switch it backon • Check whether the TV is set to the Home location. Press s> Setup > TV settings > Preferences > Location. The picture does not fit the screen • Press s (Adjust), Picture format and select Auto fill. The picture position on screen is not correct • To correct a shifted picture, press s (Adjust) and selectPicture shift. Use the navigation keys to adjust the pictureposition. Press OK to stop Picture shift. • If distorted screen edges are visible, press h > Setup > TVsettings > Picture > Screen edges and use the slider bar toenlarge the picture slightly. There is a picture but no sound• Check the volume is not set to 0. • Check the sound has not been muted with m.• Check that all cables are connected properly.• If no sound signal is detected, the TV automatically switches offsound. This is proper operation and is not a malfunction. The sound is poor • Try any Smart sound setting, press s (Adjust), Smart sound.• Check that the sound is set to Stereo. The sound comes from one speaker only • Check the Balance setting. Press h > Setup > TV settings >Sound > Balance. Use the slider bar to set the balance. Sound delay• If there is an audio to video sync mismatch when sound comesfrom a Home Theatre System, an audio sync delay needs to beset up. Read more about Audio to Video sync in Help > Setup> Devices > Audio to Video sync. 76Troubleshooting / Picture and sound
6.5Devices HDMI connections• The HDMI -HDCP procedure might take a few seconds beforethe picture from a device appears.• If the TV does not recognise the device and there is nopicture, try switching from one device to another and back againto restart the HDCP procedure. • If sound interruptions occur persistently, see the user manual ofthe device to check the output settings. If that does not help,connect an additional audio cable.• If a DVI to HDMI adaptor is used, check that an additionalaudio connection is in place to complete the DVI connection. EasyLink HDMI-CEC• Check if the connected device supports the HDMI -CECstandard and is properly set up. Read the user manual that comeswith the device.• Check if the HDMI cable is properly connected. • Check if EasyLink on the TV and device is switched on.• Make sure that the System audio control in your HDMI -CECaudio devices is properly set up. Read the user manual thatcomes with your audio device. PC display• The refresh rate of a PC connected to the TV with VGA orDVI to HDMI adapter should set to 60Hz.• Check that the correct resolution mode is selected on yourPC. See the list in Help > Specifications > Display resolutions. Troubleshooting / Devices77
6.6Multimedia The files on my USB device are not shown• Set your device (camera) to ‘Mass Storage Class’ compliant.• The USB device may need specific driver software.Unfortunately, this software cannot be downloaded to your TV. • Not all audio and picture files are supported. See the list inHelp > Specifications > Multimedia. Files from a USB device do not play back smoothly• The transfer performance of the USB device limits the transferrate. The files on my PC are not shown• To look for files on your home network with Browse PC,your PC media server software should be set up to share thefiles with the TV. See the list of compatible Media serversoftware in Help > Specifications > Multimedia. 78Troubleshooting / Multimedia
6.7Network Net TV does not work• If the connection to the router is OK, check the routerconnection to the Internet.• You need a high -speed Internet connection for your router. Troubleshooting / Network79
7 7.1 Specifications Software Software version To view the current TV software version, press h > Setup >Software settings and press OK. Select Current software infoand read Version:. Open source software This television contains open source software. Philips herebyoffers to deliver or make available, upon request, for a charge nomore than the cost of physically performing source distribution, acomplete machine readable copy of the corresponding sourcecode on a medium customarily used for software interchange. This offer is valid for a period of 3 years after the date ofpurchase of this product. To obtain the source code, write to . .. Open Source Team, Philips ElectronicsHigh Tech Campus Bld HTC -445600 AE EindhovenThe NetherlandsE -mail: [email protected] Read the Open Source Licences in Help > To begin > OpenSource Licences. 80Specifications / Software