Philips 42pfl9664 User Manual

							3.7      Scenea2/3We recommend setting the TV to the energy conscious
Standard settings before you switch on Scenea.
Press Options o and select Picture and sound > Smart
settings > Standard.
Select a new photo
1 Connect a USB device that holds your new photo to the
TV. This photo must be in a JPEG format.
2 Highlight the photo in the USB content list with the
navigation keys. If the content list does not appear
automatically, press h and select Browse USB.
3 With the new photo highlighted, press Options o and
select Set as Scenea. Agree to overwrite the current photo.
4 Disconnect the USB device and select Scenea in the
Home menu to view the new photo.
...
 
						

							3.7      Scenea3/3Limitations
When Scenea is on, the TV will automatically switch
to standby after 4 hours. The TV will show a message 1
minute before switching to Standby. The switching to
Standby prevents unnecessary energy use in case you
forget that Scenea is switched on.
If the Sleeptimer is set, the TV will also switch to standby
after the set time has elapsed.
 
						

							3.8.1   Hearing impairedSome digital TV channels broadcast special audio and
subtitles adapted for people who are hearing impaired.
To switch on hearing impaired audio and subtitles, press
h > Setup > Installation > Languages > Hearing impaired.
Select On and press OK.
The TV switches to hearing impaired audio and subtitles, if
available.
To verify whether a hearing impaired audio language is
available, press Options o and select Audio language and
look for an audio language with an ear icon.
 
						

							3.8.2   Visually impairedSome digital TV channels broadcast special audio adapted
for people who are visually impaired. The normal audio is
mixed with extra commentary.
To switch on visually impaired audio, press Options o
while watching the digital TV channel and select visually
impaired. Select On and press OK.
The TV switches to visually impaired audio, if available.
In the Options menu, you can set the visually impaired
audio to be heard from the Speakers, the Headphones only
or from both Speakers and headphones.
Also in the Options menu, select Volume - Visually
impaired to change the volume of the extra commentary.
To verify whether a visually impaired audio language is
available, press Options o and select Audio language and
look for an audio language with an eye icon.
 
						

							4.1.1   Smart settingsYou can set the TV to the predefined setting that is best
for what you're watching at the moment. Each setting
combines picture, sound and Ambilight.
While watching TV, press Options o and select Picture
and sound. Press OK.
Select Smart settings and press OK.
Select a setting from the list and press OK.
• Personal — Sets the TV to your personal preferences set
in the Picture, Sound and Ambilight menus in Setup.
• Vivid — Rich and dynamic settings, ideal for daylight use.
• Natural — A natural picture setting.
• Cinema — Ideal settings for watching movies.
• Game — Ideal settings for gaming.
• Standard — The factory standard and most energy
conscious settings.
 
						

							4.1.2      Picture1/4In the Picture menu, you can adjust all picture settings
individually.
Close this user manual and press h > Setup > Picture.
Use w or x, u or v to select and adjust a setting.
Press OK to activate a setting.
• Settings assistant
Start the Settings assistant to guide you through basic
picture settings easily.
Follow the instructions on screen.
• Contrast
Changes the level of brightness in the picture but the level
of darkness remains the same.
• Brightness
Changes the level of light in the whole picture.
• Colour
Changes the level of saturation.
...
 
						

							4.1.2      Picture2/4• Hue
If NTSC is broadcast, this level compensates the colour
variations.
• Sharpness
Changes the level of sharpness of fine details.
• Noise reduction
Filters out and reduces the noise in the picture. Set levels
to Minimum, Medium, Maximum or Off.
• Tint
Sets the colours to Normal, Warm (reddish) or Cool
(bluish). Select Custom to make your own personal
settings in the Custom menu.
• Custom tint
Use a slider bar to change the colour temperature of the
picture …
- R-WP red whitepoint
- G-WP green whitepoint
- B-WP blue whitepoint
- R-BL red blacklevel
- G-BL green blacklevel
...
 
						

							4.1.2      Picture3/4• Perfect Pixel HD
Controls the advanced settings of the Perfect Pixel HD
Engine.
- HD Natural Motion
Removes motion judder and reproduces smooth
movement, especially in movies.
- 200 Hz Clear LCD (100 Hz Clear LCD for 32" and 37")
Gives a superior motion sharpness, better black level,
high contrast with a flicker-free, quiet image and a larger
viewing angle.
- Advanced sharpness
Enables superior sharpness, especially on lines and
contours in the picture.
- Dynamic contrast
Sets the level at which the TV automatically enhances the
details in the dark, middle and light areas of the picture.
- Dynamic backlight
Sets the level at which power consumption can be
reduced by dimming the brightness intensity of the
screen. Choose for the best power consumption or for the
picture with the best brightness intensity
...
 
						

							4.1.2      Picture4/4- MPEG artefact reduction
Smooths the digital transitions in the picture.
- Colour enhancement
Makes the colours more vivid and improves the resolution
of details in bright colours
• PC mode
Sets the TV to the ideal predefined computer setting in
case a computer has been connected.
• Light sensor
Adjusts the picture and Ambilight settings automatically
to the lighting conditions of the room. Switches the Light
sensor on or off.
• Picture format / auto format mode
Read Use your TV > Watch TV > Adjust the picture format
• Picture shift
To shift the picture vertically on the screen with the cursor
keys.
 
						

							4.1.3      Sound1/3In the Sound menu, you can adjust all sound settings
individually.
Close the user manual and press h > Setup > Sound.
Use w or x, u or v to select and adjust a setting.
Press OK to activate a setting.
• Bass
Changes the low tones of the sound. Select each bar to
change the setting.
• Treble
Changes the high tones of the sound. Use each slider bar
to change the setting.
• Volume
Changes the volume.
If you do not want the volume bar to appear, press h >
Setup > Installation > Preferences > Volume bar. Select Off
and press OK.
...