Philips 40pfl4907 F7 User Manual

English41
Wirelessnetworksetting
This menu is displayed only when you set Wireless in 
Network	selection. In order to use a wireless network, you must set up 
a connection to the AP (e.g. wireless router).
3	Use ▲▼ to select Wireless	network 	setting , then press  OK.
Auto
Search for wireless networks automatically and select the SSID from the 
list. 
4	Use ▲▼ to select  Auto, then press  OK.
5	The list of wireless networks will be displayed. 
    Use ▲▼ to select the appropriate the SSID, then...

English42
IPconfiguration
In following cases, select IP	configuration to set each setting as 
necessar y. 
 
– When connection test failed with the setting of  Connection	test.
 
– When instructed by your Internet ser vice provider to make specific 
settings in accordance with your network environment.
3	Use ▲▼ to select  IP	configuration , then press OK.
4	Use ▲▼ to select a setting, then press  OK.
Network selection IP setting modeManual
Wireless network setting IP address192.168.11.3
IP...

English43
Setting	status
You can check the status of network settings.
2	Use ▲▼ to select  Setting	status , then press  OK.
•  Network setting list will be displayed.
•  MAC address of this unit will be displayed in the list.
Reset 	network 	settings
You can reset the status of network settings.
2	Use ▲▼ to select  Reset	network 	settings , then press  OK.
3	Press  OK to select  Start	now .
Return 	your 	settings 	to 	default 	values
When you return picture and sound settings to their default values the...

English44
Upgrading	the 	software
USB 	upgrade
You can upgrade the software by using USB Memory Stick.
1	Connect your USB Memor y Stick with the upgrade file to the USB 
terminal on the side of your TV.
 
2	Use ▲▼  
to select  Software	update , then press  OK.
3	Use ▲▼  
to select  USB, then press  OK.
4	Use ▲▼  
to select the desired Update file.
5	Use ◄►  
to select  Yes, then press  OK.
6	Read the on-screen instructions and confirm that you want to 
continue with the installation. 
Software 	update...

English45
6	 Connecting	devices
No supplied cables are used with these connections:
 
• Please purchase the necessar y cables at your local store.
Before you connect AC power cord:
Be sure other devices are connected properly before plugging in the AC 
power cord.
Selecting 	your 	connection 	quality
HDMI 	- 	Highest 	quality
Suppor ts high-definition Digital signals and gives highest picture and 
sound quality. Video and Audio signals are combined in one cable. You 
must use HDMI for full...

English46
HDMI-ARC	connection
HDMI-ARC allows you to use EasyLink to output TV Audio directly to 
a connected Audio device, without the need for an additional Digital 
Audio cable.
 OUT
HDMI-ARCDigital 	home 	theater	amplifierHDMI 	cable
HDMI 	1 	IN 	only
Note
 
• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to 
output Digital Audio to an HDMI home theater system.
 
• Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected 
to the device using an...

English47
Connecting	the 	TV 	to 	the 	Internet 	using 	a 	wireless 	LAN
WLAN
LAN
Broadband 	router
USB 	wireless 	LAN	adapter
Network 	provisioning	equipment
Ethernet 	cableInternet
Note
 
• After you made the wireless connection, set up necessar y network settings.
  Network ➠ p.	40
 
• Use a Wireless LAN Access Point  (AP) (e.g. wireless router) which suppor ts IEEE 
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
 
• This unit does not suppor t Ad-hoc mode.
 
• Other...

English48
The following video signals can be displayed:
FormatResolution Refresh	rate
VGA
 640x
480
60Hz
SVGA
 800x
600
XGA  1,024 x
768
WXGA  
1,280 x
768
  1,360 x
768
FHD  1,920 x
1,080
Other formats or non-standard signals will not be displayed correctly.
Note
 
• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
 
•  
The following operations may reduce noise.
 
– Attach a ferrite core to the AC power cord of your PC .
 
– Unplug the AC power cord and use the...

English49
7	 Useful	tips
FAQ
Question Answer
My	remote	control	does	not	
work.
What	should	I	do?  
• Check the antenna or cable connection to the main unit.
 
• Check the batteries of the remote control.
 
• Check if there is an obstacle between the infrared sensor window and the remote control.
 
• Test the signal Output use  IR	Signal	Check. 
➠ p.	52 If okay, then possible infrared sensor trouble.
 
• Aim the remote control directly at the infrared sensor window on the front of the unit.
 
• Reduce the...

English50
SymptomRemedy
No picture or sound  
• Check if the Power is On.
 
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray  / DVD recorder.
 
• View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.
 
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and Turn On the unit again.
 
• Check whether the connection of the antenna, cable receiver or satellite box...