Philips 40pfl4907 F7 User Manual

English11
Control	panela	 VOLUME	−	 /	+
    Press to adjust volume down (−)  / up (+) or to move left (−)  / right 
(+) when selecting menu items.
b	 SOURCE
    Toggle to select the connected devices.
c	CHANNEL	−	 /	+
    Press to select channels  or to move up (+) /  down (−) when 
selecting menu items.
d			 POWER
    Press 
 to Turn the unit On and go into Standby mode. 
    To completely Turn Off the unit, you must unplug the AC power 
cord.
e	 Infrared	sensor
    Receives IR signals from remote...

English12
Connecting	the 	antenna 	or 	the 	cable
Be sure your antenna or other device is connected properly before 
plugging in the AC power cord.
If	you	connect	to	an	antenna 	through	RF	cable
Any DTV programs that are broadcasted in your area can be received 
for free through an antenna connection.
ININ OUT
antenna
RF
	cable
cable
If	you	connect	a	set-top	box	through	RF	cable
If the TV is connected to a cable box or satellite set-top box via a 
coaxial connection, set the TV to channel 3, 4 or the...

English13
These operations are accessible by remote control. 
Some may also be accessible by control panel on the main unit.
Initial 	setup
This section will guide you through the unit’s initial setting which 
includes selecting a language for your on-screen menu, countr y, location 
and AutoProgram, which automatically scans and memorizes viewable 
channels. You can also set the network connection in this setting.
Before you begin:
Make sure the unit is connected to antenna or cable.
1	After making all...

English14
9	Press OK to finish  Settings	assistant .
Store	your 	preferences.
Cancel Store
• Network	updates  will appear after Connection	test succeeds. 
Use ◄► to select  Yes, then press OK.
•  When the initial setup is completed, the lowest memorized 
channel with the confirmation message of the location setting 
will be displayed on the TV screen.
Note
 
• If you are not receiving a signal from your cable ser vice, contact the Cable provider.
 
• If you press	 during AutoProgram, this setup of TV...

English15
4	 Use	your 	TV
Switching 	on 	your 	TV 	and 	putting 	it 	in	
Standby 	mode
To	 Turn	Power	On	or	to	 Turn	Standby	On
• Press  .
 on the side panel or the remote control.
Note
 
• Energy consumption contributes to air and water pollution. When the AC power 
cord is plugged in, your TV consumes energy. Your TV has ver y low Standby power 
consumption.
Adjusting 	volume
To	increase	or	decrease	volume
•    Press VOLUME −(down)  / +(up)	on the side panel or press 
VOL	+	 /	− on the remote control....

English16
Watching	channels 	from 	an 	external 	device
Switching Each Input Mode can easily switch with the remote control 
between TV (DTV or Analog TV) and external devices when they are 
connected to the unit.
1	Turn On a set-top box or the connected device.
•  The picture from your set-top box or the connected device 
might appear automatically on the TV screen.
  If the picture does not appear
	  Press  SOURCE  repeatedly to select the set-top box or the 
connected device and wait a few seconds...

English17
Philips	Wireless 	MediaConnect
You can enjoy your TV as a PC monitor wirelessly using your home 
network. Make sure you download the Philips Wireless MediaConnect 
software and install it on your PC before you perform the steps below.
Install 	Philips 	Wireless 	MediaConnect
1	Display  Setup using Home menu and use ▲▼ to select  Software, 
then press  OK.
2	Use ▲▼ to select  MediaConnect	code , then press  OK.
•  Write down the 12-digit code displayed on the screen. You will 
need this to...

English18
Guide	to 	DLNA
a
Ser ver  1Audio
Ser ver 2Photos
Ser ver 3Video
Folder
Highway BluesTitle:
Artist:
Album:
Duration: 	00:05:28
Year:
Video10
Blue hills
b c
d
e
a Home ser ver list
b   Folder  /  media icon
c  Group (folder)  /  file list
d  Image
e Current file info
View 	your 	pictures 	using 	DLNA
1	Press ▲▼ to select a file or a folder.
2	Press  OK or Æ∆
 to star t a Slide show of the files.
•  Press OK or  Æ∆
 to pause the Slide show. 
    The F icon appears. 
•  Press E or D to move between...

English19
Net	TV
Net TV offers Internet ser vices for your TV. Use the remote control to 
browse the Net TV pages. You can play movies and much more, all from 
your TV screen.
 
– Because  Net TV is an online system, it can be modified over time to 
better ser ve its purpose.
 
– Some  Net TV ser vices can be added, changed or stopped after 
some time.
 
– You cannot download and save files or install plug-ins.
Before 	Logging 	in 	to 	Net 	TV
Follow the procedure below before logging in to  Net TV.
1...

English20
Enjoying	vTuner	
With this unit, you can enjoy video and Internet radio with vTuner via 
the Internet. In order to watching video and listen to Internet radio, you 
must connect this unit to the Internet.
Video 	playback
After you set up the network connection, follow the procedure below 
to watch the video. 
Guide	to	the	player	screen
e.g.) Recommendationsa
b
c
2/3
NewsNews
Favorite
Next
Previous
Recommendations FavoGenr Most
a Categor y   :List of categor y menus
	 Recommendations  :List of...