Philips 32PHT4201 Manual

Text setup
Text language    
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1. Press 
  and select  Setup  and press  OK .
2. Select  Channel settings  >  Languages .
3. Select  Primary Teletext  or  Secondary Teletext .
4. Select your preferred Text languages.
5. Press 
 , repeatedly if necessary, to close the
menu.
Text 2.5    
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard...

channels. Finish the installation. When done, continue
with step 2.
2. Plug in the USB memory device that holds the
channel list of the other TV.
3. To start the channel list upload, press 
  and
select  Setup  and press  OK .
4. Select  TV settings  >  General settings  >  Copy
channel list  >  Copy to TV  and press  OK . You might
be asked to enter the Child lock code of this TV.
5. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
22 

7
Channel installation
- Antenna, Cable
7.1
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update    
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or...

Symbol rate mode
If your cable provider did not give you a specific 
symbol rate  value to install the TV channels, leave the
Symbol rate mode  setting on  Automatic .
If you received a specific symbol rate value, select 
Manual . However, the value you received could be in
the predefined list of symbol rates already. Select 
Predefined symbol rates  to check if your value is
available automatically.
Symbol rate
With the  Symbol rate mode  set to  Manual , you can
enter the symbol rate value you received...

To fine tune a channel, select  Fine tune  and
press  OK . You can fine tune the channel
with 
  or 
 .
If you want to store the channel found,
select  Done  and press  OK .
- Store
You can store the channel on the current channel
number or as a new channel number.
Select  Store current channel  or  Store as new
channel .
You can redo these steps until you found all available
analogue TV channels.
25 

8
TV guide
8.1
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a...

3. At the top of the screen, select 
  Scheduled  and
press  OK .
4. In the list of scheduled recordings and reminders,
select the tab  Reminders  and press  OK  to view the
reminders only.
5. Press the colour key 
  Remove  to remove the
selected reminder. Press the colour
key 
  Record  to record the selected programme.
Set a Recording
You can set a recording in the TV Guide*.
In the TV Guide, a programme set to be recorded is
marked with 
   .
To see the recording list, press 
  Recordings , a...

9
Recording and
pause TV
9.1
Recording
What you need
You can record a digital TV broadcast and watch it
later.
To record a TV programme you need…
- a connected USB Hard Drive formatted on this TV
- digital TV channels installed on this TV
- to receive channel information for the on screen TV
Guide
- a reliable TV clock setting. If you reset the TV clock
manually, recordings may fail.
You cannot record when you are using Pause TV.
In terms enforcement of copyright legislation, some
DVB providers can apply...

key 
  Adjust Time .
6. Select the start or end time and change the time
with the 
  (up) or 
  (down) keys.
Select  Apply  and press  OK .
Manual Recording
You can schedule a recording that is not linked to a
TV programme. You set the tuner type, channel and
the start and end time yourself.
To schedule a recording manually…
1. Press 
   TV GUIDE .
2. Press the colour key 
  Recordings .
3. At the top of the screen, select 
  Scheduled  and
press  OK .
4. Press 
   OPTIONS , select  Schedule  and...

10
Sources
10.1
Switch to a device
In the list of connections - the Source menu - you can
find the devices connected to the TV. From this
Source menu, you can switch to a device.
Sources menu    
To open the Sources menu, press 
  SOURCES .
To switch to a connected device, select the device
with the arrows 
  (left) or 
  (right) and press  OK .
To close the Source menu without switching to a
device, press 
   SOURCES  again.
10.2
From standby
With the TV in standby, you can switch on a
connected...