Philips 32PHT4201 Manual

3.8
Game console
HDMI
For best quality, connect the game console with an
High speed HDMI cable to the TV.
Best Setting
Before you start playing a game from a connected
game console, we advice you to set the TV in the
ideal setting  Game .
To set the TV to the ideal setting…
1. Press 
  and select  Setup  and press  OK .
2. Select  TV
settings  >  Picture  >  Advanced  >  Activity style .
3. Select  Game ,  Computer  or  TV . The
setting  TV  returns to the picture settings for
watching TV.
4. Press 
 ,...

press 
  (Pause). Trying to pause will start the
formatting. Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
3.10
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Insert a USB flash drive in one of the  USB
 connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press 
  SOURCES ,...

3.13
Headphones
Side
You can connect a set of headphones
to 
  connection on the TV. The connection is a mini-
jack 3.5mm. You can adjust the volume of the
headphones separately.
To adjust the volume . . .
1. Press 
  and select  Setup  and press  OK.
2. Select  TV settings  >  Sound  >  Headphone
volume  and press  OK .
3. Press 
  (up) or 
  (down) to adjust the volume.
4. Press 
 , repeatedly if necessay, to close the
menu.
13 

4
Switch on
4.1
On, Standby or Off
For 4100, 4200, 4101, 4111, 4201 series
Before you switch on the TV, make sure you plugged
in the mains power in the  POWER  connector on the
back of the TV.
To put the TV in Standby when the indicator light is
off, press the small joystick key on the back of the TV.
The indicator will light up.
With the TV in standby, press 
  on the remote
control to switch the TV on.
Switch to standby    
To switch the TV to Standby, press 
  on the remote
control.
Switch Off...

5
Remote control
5.1
Key overview (For 4000,
4100, 4200, 4101, 4111, 4201,
5210 series)
Top
1.
    Standby  /  On
To switch the TV on or back to Standby.
2. Playback  keys
- Play 
 , to playback
- Pause 
 , to pause playback
- Stop 
 , to stop playback
- Rewind 
 , to rewind
- Fast forward 
 , to go fast forward
- Record 
 , to record now
3.   
  TV GUIDE
To open or close the TV Guide.
4.   
  SETUP
To open the Settings menu.
5.   
  FORMAT
To open or close the Picture format menu.
Middle 1....

6.   TEXT
To open or close Text / Teletext.
5.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
5.3
Batteries
1. Slide the battery door in the direction shown by the
arrow.
2. Replace the old batteries with 2
type  AAA-LR03-1.5V  batteries. Make sure the + and
the - ends of the batteries line up correctly.
3. Reposition the...

6
TV channels
6.1
Channel Lists
About channel lists
After a channel installation, all channels appear on
the channel list. Channels are shown with their name
and logo if this information is available.
With a channel list selected, press the
arrows 
  (up) or 
  (down) to select a channel,
then press  OK  to watch the selected channel. You
only tune to the channels in that list when
using 
  
  or  
  
  keys.
Channel icons    
After an Automatic Channel Update of the channel
list, newly found...

To unlock a channel, select the locked channel in the
channel list, press 
  OPTIONS  , then
select  Unlock channel . You will need to enter the
Child lock code.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their
programmes. When the age rating of a programme is
equal to or higher than the age you have set as age
rating for your child, the programme will be locked.
To watch a locked programme...

Subtitles for analogue channels    
For analogue channels, you need to make the
subtitles available for each channel manually.
1. Switch to a channel and press  TEXT  to open Text.
2. Enter the page number for subtitles, usually  888 .
3. Press  TEXT  again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open  Status  in the  Options  menu.
Audio...

highlighted channel to another location and
press  OK .
5. Once complete, press 
   EXIT  to exit from
the Favourite channel list.
Rename channels
You can rename channels in the channel list.
1. Select the channel you want to rename in one of
the channel lists.
2. Press 
  (red).
3. You can enter text with the the on-screen
keyboard.
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV
channels, press  TEXT .
To close Text, press  TEXT  again.
Select a Text page    
To select a...