Philips 32pfl5614 User Manual

							29
Use one-touch standby
1  Press and hold Standby on the T V ’s or 
device’s remote control for at least three 
seconds. 
The TV and all connected HDMI    »
devices switch to standby.
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
 
• VGA cable
 
Use Philips EasyLink
Your TV suppor ts Philips EasyLink, which 
enables one-touch play and one-touch standby 
between EasyLink-compliant devices. 
Note
Compliant devices must be connected to your   •T V via HDMI.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not   •intend to use it.
1 Press MENU.
2 Select [Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
VGA
VGA
 LEFT / RIGHT
HDMI 1/ DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							30
Note
Multimedia file names must not exceed 32   •characters. 
Tuner/Reception/
Transmission
Aerial input: 75ohm coaxial (IEC75) • 
T V system: PAL I, B/G, D/K; SECAM B/G,  • 
D/K , L /L’ 
Video playback: NTSC , SECAM, PAL
• 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
Remote control
Type: PF02E09B, PF02E09BW  • 
(22PFL5614/60)
Batteries: 2 x A A A (LR03 type)
• 
Power
Mains power: 220 -240V, 50Hz • 
Standby power: 
						

							31
TV screen 
size (inches)Required 
pitch (mm)Required 
mounting bolts
19 75 x 75 4 x M4
22 100 x 100 4 x M4
26 200 x 100 6 x M4
32 200 x 200 4 x M6
42 400 x 400 4 x M6
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							32
TV channel issues
Previously installed channels do not appear in 
the channel list:
Check that the correct channel list is    •
selected.
No digital channels were found during the 
installation:
Check that the TV suppor ts DVB-T or    •
DVB -C in your countr y. See the listed 
countries on the back of the T V.
Picture issues
The TV is on, but there is no picture:
Check that the antenna is properly    •
connected to the T V.
Check that the correct device is selected    •
as the T V source.
There is sound but no picture:
Check that the picture settings are    •
correctly set.
There is poor TV reception from an antenna 
connection:
Check that the antenna is properly    •
connected to the T V.
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can influence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
If reception on only one channel is poor,    •
fine tune this channel.
There is poor picture quality from connected 
devices:
Check that the devices are connected    •
properly.
Check that the picture settings are    •
correctly set. 
The TV did not save your picture settings:
Check that the TV location is set to the  • 
home setting. This mode offers you the 
flexibility to change and save settings.
9 Troubleshooting
This section describes commonly encountered 
issues and accompanying solutions.
General TV  issues
The TV does not switch on:
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
Check that the power cable is securely    •
connected.
The remote control is not working properly:
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- orientation.
Replace the remote control batteries if    •
they are flat or weak.
Clean the remote control and T V sensor    •
lens.
The standby light on the TV blinks red:
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
You forgot the code to unlock the TV lock 
feature
Enter ‘8888’.   •
The TV menu is in the wrong language.
Change the T V menu to your preferred    •
language.
When turning the TV on/off/to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools down and warms up. 
This does not impact per formance.
EN
Downloaded From TУ-Manual.com Manuals 
						

							33
If a HDMI-to-DVI adaptor or HDMI to    •
DVI cable is used, check that an additional 
audio cable is connected to AUDIO L/R 
or AUDIO IN (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
Check that a suppor ted resolution and    •
refresh rate is selected on the computer.
Set the TV picture format to unscaled.   •
Contact us
If you cannot resolve your problem, refer to 
the FAQs for this product at w w w.philips.
com/suppor t. 
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in the Addendum.
Warning
Do not at tempt to repair the product yourself.   •This may cause severe injur y, irreparable 
damage to your product or void your 
warranty.
Note
Make a note of your T V model and serial   •number before you contact Philips. These 
numbers are printed on the back of the T V 
and on the packaging.
The picture does not fit the screen; it is too 
big or too small:
Tr y using a different picture format.   •
The picture position is incorrect:
Picture signals from some devices may    •
not fit the screen correctly. Check the 
signal output of the device.
Sound issues
There is a picture but sound quality is poor:
Note
If no audio signal is detected, the T V   •automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly    •
connected.
Check that the volume is not set to 0.   •
Check that the sound is not muted.   •
There is a picture but the sound quality is 
poor:
Check that the sound settings are    •
correctly set.
There is a picture but sound comes from one 
speaker only:
Verify that sound balance is set to the    •
centre.
HDMI connection issues
There are problems with HDMI devices:
Note that HDCP suppor t can delay the    •
time taken for a T V to display content 
from a HDMI device. 
If the T V does not recognize the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							34
E
EasyLink 
disable 29
enable 29
one-touch play  29
one-touch standby  29
environmental care  5
F
factory settings  20
favourite list 
select 14
set up  13
H
HDMI cable 
troubleshooting 33
I
install channels 
automatic 21
manual 22
K
Kensington lock 29
L
location 19
lock 
Kensing ton 29
TV lock /child lock   15
M
menu 
main menu   10
teletex t 13
Multimedia 
technical specifications  30
music 
USB 19
10 Index
A
analogue channel 
fine-tune  22
B
bracket 30
C
Channel list 
favourite 13
troubleshooting 32
Channels 
favourite list  13
install 
automatic 21
manual 22
rename 23
reorder 23
Clock 16
computer format 
technical specifications  30
Connections 
HDMI 
troubleshooting 33
mains cord  24
over view 24
technical specifications  30
troubleshooting 33
connectors 
over view 24
D
demo 20
devices 
add to home menu  10
connect 24
watch 9
display 
resolution 30
Dual view 17
EN
Downloaded From TУ-Manual.com Manuals 
						

							35
pc connection  28
preferences 19
screen care  5
software 19
standby 8
switch channels  8
switch off  8
switch on  8
troubleshooting 32
tuner technical specifications  30
wall mount   30
TV lock/child lock 
lock channels  16
lock connected devices  16
PIN code   15
U
USB 
listen to music  19
view photos  18
V
Video format 
video format technical specifications  30
volume 
adjust 9
W
Wallpaper 16
O
One-touch play 29
One-touch standby 29
P
PC 
pc connection  28
picture format 
picture format change  11
troubleshooting 32
Picture settings 10
PIN code  15
R
reception 32
remote control 
over view  6
technical specifications  30
S
settings 
sound 12
settings assistant 10
Smart settings 10, 12
software 
version 19
sound settings  12
T
Table of Pages 13
technical specifcations 30
Te l e t e x t 
features 13
subpages 13
table of pages  13
timer 
on timer   15
Sleep timer  15
standby 15
troubleshooting 32
TV 
adjust volume  9
as PC monitor  28
menu  10
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							36EN
Downloaded From TУ-Manual.com Manuals 
						

							37
English
EN
Downloaded From TУ-Manual.com Manuals 
						

							© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number:  Q41G4201813 5C
Q41G4201813 5C
Downloaded From TУ-Manual.com Manuals