Philips 32pfl5605 User Manual

							19
3	 %

		
						

							20
Start a TV demo
You can use demonstrations to better 
understand the features of your T V. Some 
demos are not available on cer tain models. 
Available demos are displayed in the menu list.
  
1 Press DEMO on the remote control.
2 Press  to select a demo and press OK 
to view it.
3 Press DEMO to exit.
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel installation 
settings remain the same.
1 Press  (Home).
2 Select [Setup] > [Installation] > [Factory 
settings].
3 Press OK or  to enter the [Factory 
settings] menu.
  »[Reset] is highlighted.
4 Press OK to reset to factor y settings.
5 Press  (Home) to exit.
EN
 
						

							21
Step 2 Search and store new TV 
channels
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
  »The [Analogue: Manual] menu appears.
3 Press  to select and enter 
[Search].
4 Press Numeric buttons to manually enter 
the three-digit frequency.
5 Press OK to begin search.
  »If a channel is unavailable at the 
selected frequency, the system searches 
for the next available channel.
6 Press  BACK when the new channel is 
found.
7 Press  to select [Store new channel] 
to store the new channel under a new 
channel number.
8 Press  to enter [Store new channel].
9 Press OK to store the new channel.
10 Press  (Home) to exit.
Rename channels
You can rename channels. The name appears 
when you select the channel.
1  When watching T V, press OK to display 
the channel grid .
2  Select the channel you want to rename.
3 Press  OPTIONS.
  »The channel options menu appears.
4 Press  to select and enter 
[Rename chan.].
  »A text input box appears.
5 Press  to select characters.
6 Press OK						
characters.
6 Install channels
Automatically install channels
This section describes how to search and store 
channels automatically.
1 Press  (Home).
2 Select [Installation] > [Channel install.] 
> [Channel assistant].
3 Press OK.
4  Follow the on-screen instructions to 
install channels.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select the colour and sound 
system
1 Press  (Home).
2 Press  to select [Setup] > 
[Installation] > [Channel install.] > 
[Analogue: Manual].
  »The [Analogue: Manual] menu appears.
3 Press  to select and enter [Colour 
system].
  »A list of available colour systems 
appears.
4 Press  to select your colour system 
and then press OK.
5 Press  to return to the [Analogue: 
Manual] menu.
6 Press  to select and enter [Sound 
system].
  »A list of available sound systems 
appears.
7 Press  to select your sound system 
and then press OK.
English
EN
 
						

							22
Tip
  =Rename channels - a channel name can be up 
to six characters long.
  =Press [Aa] to change an uppercase let ter to a 
lowercase let ter and vice versa.
Reorder channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press  BROWSE 
repeatedly until the channel grid is 
displayed. 
2 Press  OPTIONS.
  »The channel options menu appears.
3 Press  to select and enter 
[Reorder].
4  Select the channel you want to reorder 
and press OK.
  »The selected channel is highlighted by 
a yellow border.
5 Press  to select the new position 
for the channel.
  »The new position is highlighted by a 
blue border.
6 Press OK					


!
7 Press  OPTIONS.
  »[Done reordering] appears.
8 Press OK		
	
#!
EN
 
						

							23
Bottom connectors
  
a  CVI 1 (Y Pb Pr and AUDIO L/R) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
b
  DIGITAL AUDIO OUT
Digital audio output to home theatres 
and other digital audio systems.
c
 ANTENNA
Signal input from an antenna, cable or 
satellite.
d
  VGA and AUDIO IN
Audio and video input from a computer.
e
 HDMI
Digital audio and video input from high-


	
#
	

	
	
	
						

							24
  
=	VGA cable
  
Add devices
After connecting devices, assign the device 
attached to each connector. This allows you to 
easily identify devices connected to your TV.
1 Press  (Home).
2 Select [Add new device] and press OK.
3 Select [Start] and press OK.
4 Press  or  to select a device and press 
.
5 Press  or  to select the connector 
your device is connected to and press 
.
6  If available, press  or  to select the 
audio connector your device is connected 
to and press 
.
7  Switch on your device and check for 
video and audio output.
DVI
DVI/VGAAUDIO IN 
VGA
DVI/VGAAUDIO IN 
VGA
Connect a computer
=	 Before you connect a computer to the 
T V, set the monitor refresh rate on your 
computer to 60Hz.
=	 Connect your computer to the T V.
=	 Press 
 FORMAT and change the T V 
picture format to [Unscaled].
  
Connect a computer with one of the 
following connectors:
Note
  =Connections via DVI or VGA require an 
additional audio cable.
=	HDMI cable
  
=	DVI - HDMI cable
  
=	HDMI cable and HDMI-DVI adaptor
DVI
DVI/VGAAUDIO IN 
EN
 
						

							25
To use one-touch audio, you must map the 
audio input from the connected device to 
your T V. 
You can use the remote control from the 
connected device to adjust the volume.
Remote control (RC) key forwarding
RC key for warding allows you to control 
EasyLink-compliant devices using your T V 
remote control.
EasyLink buttons
You can control EasyLink-compliant devices 
with the following buttons on the remote 
control of your T V.
Button EasyLink function
 (Play/
Pause)Star ts, pauses or resumes 
playback on your EasyLink 
device.
 (Stop) Stops playback on your EasyLink 
device.
 
(Record)Star ts or stops video recording 
on your EasyLink device.
 (Fast 
Backward)Searches backward.
 (Fast 
Forward)Searches forward.
0-9 
(Numeric 
buttons)When EasyLink is enabled, 
selects a title, chapter or track.
Navigates through the menus of 
the EasyLink-compliant device.
OKActivates a selection or accesses 
the menu of the EasyLink-
compliant device.
 
OPTIONSDisplays the menus of the 
EasyLink-compliant device. Press 
 (Home) to display the T V 
menu.
(Standby-
On)When EasyLink is enabled, 
switches the T V and all EasyLink 
devices to standby. Press and 
hold 
 (Standby-On) for at least 
3 seconds.
8  If there is video and audio output, press 
OK.
Repeat the procedure until all devices are 
correctly assigned to connectors.
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
  =Philips does not guarantee 10 0% 
interoperability with all HDMI CEC devices.
Note
  =The EasyLink-compliant device must be 
switched on and selected as the source.
EasyLink features
One-touch play 
When you connect your product to devices 
that suppor t one-touch play, you can control 
your product and the devices with one 
remote control. For example, when you press 
Play on your DVD remote control, your T V 
automatically switches to the correct channel 
to show the DVD content. 
One-touch standby
When you connect your T V to devices that 
suppor t standby, you can use your T V remote 
control to put your T V and all connected 
HDMI devices in standby mode.
System audio control
When you connect your T V to HDMI 
CEC compliant devices, your TV can 
switch automatically to play audio from the 
connected device. 
English
EN
 
						

							26
Use a Kensington lock
There is a Kensington security slot at the 
bottom of the TV. Prevent theft by looping 
a Kensington lock between the slot and a 
permanent object, such as a heavy table.
  
Tip
  =Press TV to switch back to the aerial source 
from EasyLink mode.
Enable or disable EasyLink
Note
  =Do not enable Philips EasyLink if you do not 
intend to use it.
1 Press  (Home).
2 Select [Installation] > [Preferences] > 
[EasyLink].
3 Select [ON] or [OFF].
Enable or disable remote control key 
forwarding
1 Press  OPTIONS.
2 Select [En./Dis. RC pass.].
3 Press OK.
4 Press  or  to highlight an HDMI 
connector.
5 Press OK to enable RC key for warding 
for the selected HDMI connector.
Set TV speakers to EasyLink mode
When you play content from an EasyLink 
compliant home theater, the T V speakers are 
automatically muted.
1 Press  (Home).
2 Press  to select [Setup] > [Sound].
  »The [Sound] menu appears.
3 Select [TV speakers].
  »The [TV speakers] menu appears.
4 Select [Auto (EasyLink)].
  »TV speakers are set to EasyLink mode.
EN
 
						

							27
Multimedia
=	 Connection: USB
=	 Playback formats: MP4, JPEG, JPG, MP3
Video playback via USB:
Container Video 
codecAudio 
codecFile 
extension
Mpeg1 Mpeg-1 Mpeg 
audio.dat
.mpg
Mpeg4 Mpeg-4 AAC .avi
.mp4
RealMedia Real 
Media 

						

							
TV screen 
sizeWall bracket type Screw size
32” - 40” 200 x 200 mm M6
46” - 52” 300 x 300 mm &

	
%

#		



		
-		#	
without notice.
  
32PFL5605
=	 Without T V stand
=	 Dimension ( WxHxD): 790 x 501 x 
92 (mm)
=	 Weight: 10 kg
=	 With T V stand
=	 Dimension ( WxHxD): 790 x 542 x 
221 (mm)
=	 Weight: 11.5 kg
40PFL5605
=	 Without T V stand
=	 Dimension ( WxHxD): 977 x 605 x