Philips 32pfl5605 User Manual

							9
Use teletext
1 Press  TELETEXT.
  »The main index page appears.
2  Select a page as follows:
=	 Press the Numeric buttons to enter 
a page number.
=	 Press CH +/- or 
 to view the 
nex t or previous page.
=	 Press the Colour buttons to select a 
colour coded item.
=	 Pressing 
 BACK to return to the 
previously viewed page.
3 Press  TELETEX T to exit teletex t.
Use the home menu
  
Note
  =You can add new devices to the home menu 
for easy access.
1 Press  (Home).
  »The home menu appears.
2 Press  to select the device.
3 Press OK to watch the connected device 
on your T V.
Adjust TV  volume
 
  
To increase or decrease volume
=	 Press 
 +/- on the remote control or at 
the side of the T V.
To mute or unmute sound
=	 Press 
 to mute the sound.
=	 Press 
 again to restore the sound.
English
EN
 
						

							10
4 Press  (Home) to exit.
Tip
  =After selecting [Add new device], follow the 
on-screen instructions to select the correct 
device and connector.
Remove devices from the home menu
If a device is no longer connected to the T V, 
remove it from the home menu.
1 Press  (Home).
2 Press  to select a device to 
remove.
3 Press  OPTIONS.
  »The [Remove device] list appears.
4 Press OK and select [Remove] to remove 
the device.
  »The selected device is removed from 
the home menu.
Change picture and sound 
settings
Change picture and sound settings to suit your 

!	^			+	

#
	
or change settings manually.
Use settings assistant
Use the settings assistant to guide you through 
the picture and sound settings.
1 Press  (Home).
2 Press  to select [Setup] > 
[Picture] >[Settings assistant] .
3 Press OK.
  »The [Settings assistant] menu appears. 
Follow the on-screen instructions to 
choose your preferred picture settings.
5  Use more of 
your TV
Access TV  menus
Menus help you to install channels, change 
picture and sound settings and access other 
features.
Access the home menu
The home menu gives you easy access to 
connected devices, picture and sound settings, 
and other useful features.
  
1 Press  (Home).
  »The menu screen appears.
 
2 Press the  to select and navigate 
through one of the following menus.
=	[Watch TV] : Switches back to the 
aerial source if another source is 
selected.
=	[Setup] : Accesses menus to change 
picture, sound and other settings.
=	[Add new device] : Adds new 
devices to the home menu.
3 Press OK				
!
Add new deviceSetup
Watch TV
EN
 
						

							11
=	[Noise reduction] : Filters and reduces 
noise in an image.
=	[Colour temp.] : Sets the colour tones 
to [Normal],[Warm] (reddish) or [Cool] 
(bluish).
=	[Pixel Plus HD] : Fine-tunes each pixel to 
match surrounding pixels. This produces a 


*	
#+

	
#!
=	[HD Natural Motion] : In selected 

	!	`
			

	>
X		
		
smoothly. You can switch HDNM on 
or off.
=	[100Hz Clear LCD] : Sets the 
T V refresh rate to a maximum of 
100Hz to provide superior motion 
sharpness, better black level, high 

	
		>
X+*	{
	
image and a larger viewing angle.
=	[Dynamic contrast] : Enhances 
contrast.
=	[Dynamic backlight] : Adjusts 
brightness of the T V backlight to 
match lighting conditions.
=	[Colour enhancement] : Makes 
colours more vivid and improves 
the details in bright colours. You can 
switch this feature on or off.
=	[Backlight] : Adjusts the backlight.
=	[PC mode] : Adjusts picture settings 
when a PC is connected to the T V.
=	[Light sensor] : Adjusts settings 
dynamically to match lighting conditions.
=	[Picture format] : Changes the picture 
format.
=	[Horizontal shift] : Adjusts the picture 
horizontally for PC-VGA or HD input.
=	[Vertical shift] : Adjusts the picture 
ver tically for PC-VGA or HD input.Use smart picture
|
	
 	
			+	
picture settings.
1 Press PICTURE.
  »The [Smart picture] menu appears.
2 Press  to select one of the following 
smar t picture settings.
=	[Personal] : Lists customised picture 
settings.
=	[Vivid] : Applies rich and dynamic 
settings.
=	[Standard] : Adjusts picture settings 
to suit most environments and types 
of video.
=	[Movie] : Applies settings for movie 
viewing.
=	[Game] : Applies settings for games.
=	[Energy saving] : Applies low-energy 
settings.
3 Press OK				
!
  »The selected smar t picture setting is 
applied.
Manually adjust picture settings
1 Press  (Home).
2 Press  to select [Setup] > 
[Picture].
  »The [Picture] menu appears.
3 Press  to select from the following 
settings and adjust:
=	[Smart picture]	}	~


	+	
smar t picture settings.
=	[Contrast] : Adjusts the intensity of bright 
areas, keeping dark areas unchanged.
=	[Brightness] : Adjusts the intensity and 
details of dark areas.
=	[Colour] : Adjusts colour saturation.
=	[Hue] : Compensates for colour 
variations. (Available only during video 
playback.)
=	[Sharpness] : Adjusts sharpness in the 
image.
English
EN
 
						

							12
 
[Super zoom] : (Not 
for HD and PC mode.) 
Removes the black bars on 
the side of 4:3 broadcasts. 
There is minimal 
distor tion.
 
[4:3] : Shows the classic 
4:3 format.
 
[Movie expand 16:9] 
: (Not for HD and PC 
mode.) Scales 4:3 format 
to 16:9.
 
[Wide screen] : Scales 4:3 
format to 16:9.
 
[Unscaled] : For HD 
and PC mode only, 
and in selected models 
only. Allows maximum 
sharpness. Some 
distor tion may be present 
due to the broadcaster’s 
systems. Set your PC 
resolution to wide screen 
mode for best results.
Use smart sound
|
	
 	
			+	
	
settings.
 
1 Press  SOUND.
  »The [Smart sound] menu appears.
2 Press  to select one of the following 
smar t sound settings.
=	[Standard] : Adjusts sound settings 
to suit most environments and types 
of audio.
Change picture format
 
1 Press  FORMAT.
  »A picture format bar appears.
2 Press  to select a picture format.
  »The selected picture format is 
activated.
3 Press OK				
!
Summary of picture formats
The following picture settings can be 
#!
Note
  =Depending on the format of the picture 
source, some picture set tings are not available.
EN
 
						

							13
Use advanced teletext 
features
Access the teletext options menu
Access the teletex t features through the 
teletext options menu.
1 Press  TELETEXT.
  »The teletext screen appears.
2 Press  OPTIONS.
  »The teletext options menu appears.
3 Press  to select one of the following 
options.
=	[Freeze page] : Freezes the current 
page.
=	[Dual/Full screen] : Enables and 
disables dual screen teletext.
=	[Reveal] : Hides or reveals hidden 
information on a page, such as 
solutions to riddles or puzzles.
=	[Cycle subpage] : Cycles through 
subpages automatically if subpages 
are available.
=	[Language] : Switches to a different 
language group to display a language 
correctly when it uses a different 
character set.
4 Press OK				
!
5 Press  TELETEX T to exit the teletex t 
options menu.
Select teletext subpages
A teletex t page can hold several subpages. 
Subpages are displayed on a bar nex t to the 
main page number.
1 Press  TELETEXT.
  »The teletext screen appears.
2  Select a teletex t page with subpages.
3 Press  to enter a subpage.
  »The subpage appears.
4 Press  to switch between subpages.
=	[News] : Applies settings for spoken 
audio, such as news.
=	[Movie] : Applies settings for movies.
=	[Personal] : Applies the settings that 
were customised in the sound menu.
3 Press OK				
!
  »The selected smar t sound setting is 
applied.
Manually adjust sound settings
1 Press  (Home).
2 Press  to select [Setup] > [Sound].
  »The [Sound] menu appears.
3 Press  to select and adjust:
=	[Smart sound] : Accesses pre-
	
 	
	

#
!
=	[Bass] : Adjusts the bass level.
=	[Treble] : Adjusts the treble level.
=	[Volume] : Adjusts the volume.
=	[Balance] : Adjusts the balance of the 
right and lef t speakers.
=	[Dual I-II] : Selects audio languages if 
dual sound broadcast is available.
=	[Mono/Stereo] : Selects mono 
or stereo if stereo broadcast is 
available.
=	[TV speakers] : Sets the T V speakers 
on or off, or outputs sound to an 
EasyLink-compliant device. This 
option is available when you select 
[EasyLink] in the [Preferences] 
menu.
=	[Surround] : Enables spatial sound.
=	[Auto volume] : Automatically 
reduces sudden volume changes, for 
example, when switching channels. 
=	[Delta volume] : Corrects volume 
differences between T V channels 
and connected devices (switch 
to your connected device when 
adjusting [Delta volume]).
English
EN
 
						

							14
Add a channel to the favourite list
Tip
  =View all channels before adding a channel to 
the favourite list.
1  When watching T V, switch to the channel 
you want to add to a favourite list.
2 Press  to select a channel to add 
to the favourite list.
3 Press  OPTIONS.
  »The channel options menu appears.
4 Press  to select [Mark as favourite].
5 Press OK.
  »The channel is added to the favourite 
list.
6 Press  BACK to exit.
Tip
  =When watching T V, press  OPTIONS 
> [Mark as favourite] to save the current 
channel in the favourite list.
Remove a channel from the favourite 
list
Note
  =Select the favourite list to edit, before 
removing a channel (see ‘Select the favourite 
list’ on page 14).
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
  »The channel options menu appears.
3 Press  to select [Unmark as fav.].
4 Press OK.
  »The channel is removed from the 
favourite list.
5 Press  BACK to exit.
Select T.O.P. teletext broadcasts
Table Of Pages ( T.O.P.) teletex t broadcasts 
allow you to jump from one subject to 
another without using page numbers. T.O.P. 
teletex t is not broadcast on all T V channels.
1 Press  TELETEXT.
  »The teletext screen appears.
2 Press  INFO.
  »The T.O.P. over view appears.
3 Press  to select a subject.
4 Press OK to view the page.
Create and use lists of 
favourite channels
You can create a list of your preferred TV 

	
					
	
	
easily.
Select the favourite list
  
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
  »The channel options menu appears.
3 Press OK to select [Show fav. ch.].
4 Press  to select the favourites list or 
[All].
5 Press OK.
  »If you select the favourites list, only the 
channels in the favourites list appear in 
the channel grid.
  »If you select [All], all the installed 
channels appear in the channel grid.
6 Press  BACK to exit the menu.
EN
 
						

							15
8 Press OK		!
9 Press  BACK to exit.
Tip
  =Select [On timer] > [Activate] > [Of f ] to 
disable [On timer]. 
  =When [On timer] is [Of f ], only [Activate] can 
be selected. 
  =Set the T V clock before activating [On 
timer]feature.
Use child control
You can prevent your children from watching 
cer tain programs or cer tain channels by locking 
the TV  controls. 
Set or change your PIN code
1 Press  (Home).
2 Press  to select [Setup] > 
[Features] > [Change/Set code].
  »The [Change/Set code] menu appears.
3  Enter the code with the Numeric 
buttons.
  »~	

#	
	
#		
your code is created or changed.
Tip
  =		#		*		
						

							16
Display the TV clock
1  When watching T V, press  OPTIONS.
  »The TV options menu appears.
2 Select [Clock].
3 Press OK.
  »The clock is displayed.
Note
  =	X	
	
	
	 		
seconds. 
  =Set the T V clock again if you have switched 
off/on your T V using the power switch.
View photos, play music and 
watch video from a USB 
storage device
Caution
  =Philips is not responsible if the USB storage 
device is not suppor ted, nor is it responsible 
for damage or loss of data from the device.
Your TV has a USB connector that enables you 
to view photos, listen to music or watch movies 
stored on a USB storage device.
Playback type 
	
	

Pictures JPEG (non-progressive 
only)
Music MP3
Video MP4, RM
Note
  =Only FAT or DOS -format ted USB storage 
devices are suppor ted. File names must not 

						

							17
View a slide show of your photos
1  When a full screen image of a photo is 
displayed, press OK or 
.
  »A slide show begins from the selected 
image.
2 Press:
=	OK or 
 to pause the slide show.
  »The
 icon appears.
=	 Press 
 or  to move between 
images.
=	 Press BACK or 
 to stop the slide 
show. 
Change slide show settings
1  When viewing a slide show, press  
OPTIONS.
  »The slide show options menu appears.
2 Press  to select one of the following.
=	[Start/Stop slide.] : Star ts or stops a 
slide show.
=	[Slideshow trans.] : Sets the 
transition from one picture to the 
next.
=	[Slideshow freq.] : Sets the amount 
of time that a picture is shown.
=	[Rotate image] : Rotates a picture.
=	[Set as wallpaper] : Sets the image as 
wallpaper.
=	[Show info] : Displays the picture 
name, date and size of the picture in 
the slide show.
3 Press OK				

#!
Note
  =[Rotate image] and [Show info] appear only 
when you press OK or 
 to pause the slide 
show.
Listen to music
1  Connect a USB storage device to the T V.
2 Press  to enter the menu.
3 Select [Music], and then press  to enter 
the [Music] folder.
Browse the USB storage device
1  Turn on the T V.
2  Connect the USB storage device to the 
TV.
3 Press  (Home).
  »The home menu appears.
4 Press  to select [Browse USB].
5 Press OK		!
  »The USB content browser appears.
Tip
  =Press  BROWSE to switch between 

			

#	

!
Disconnect a USB storage device
Caution
  =Follow this procedure to avoid damage to your 
USB storage device.
1 Press  (Home) to exit the [USB] menu.
2	 
			

		
disconnecting the USB storage device.
View photos
1  In the USB content browser, select 
[Picture] and press 
 to enter.
2 Press  BROWSE to switch between 

			

#	

!
3 Press  to select a photo.
4 Press OK to view the selected photo in 
full screen mode.
Tip
  =When in full screen mode, press  to move 
between photos. 
English
EN
 
						

							
Use Scenea to display a 
picture as TV wallpaper
You can use Scenea to display a picture as 
wallpaper on your TV. Make sure that the 
location of your TV is set to home (see ‘Change 
TV preferences’ on page 19).
Activate Scenea
 
Single-picture wallpaper
Press SCENEA on your remote control.
  »The default or pre-loaded picture is 
displayed.
Note
  =To deactivate the wallpaper, press any remote 
control button except 
,  SMART SOUND, 
or 
 SMART PIC.
  =The wallpaper is also deactivated when you 
connect a USB storage device to the TV or 
star t an EasyLink-compliant device through 
one-touch play.
Wallpaper slide show
Make sure the wallpaper is not yet activated.
1  Connect a USB storage device to the T V.
2 Press SCENEA.
  »All pictures in the USB storage device 
are displayed.
Note
  =If the sleep timer is off, the wallpaper is 
displayed for 120 minutes. Other wise, it is 
displayed for the duration of the sleep timer.
Upload a wallpaper picture from a 
USB device
Make sure your USB storage device contains a 
picture of less than 1MB.
1  While the T V is on, connect the USB 
storage device containing your pictures to 
the USB connector at the side of your T V.
4 Press  or  to select a song.
5 Press OK or  to play the song.
=	 Press OK or 
 to pause, press OK 
or 
 again to resume.
=	 Press 
 to search-for ward.
=	 Press 
 to search-backward.
=	 Press 
 to stop playback.
View a slideshow with music
You can view a picture slide show with 
background music.
1  While the T V is on, connect the USB 
storage device containing your pictures 
and the music to the T V.
2 Press  (Home).
3 Press  to select [Browse USB] > 
[Music].
4 Press  to select an album of songs 
and press OK.
5 Press  BACK to return to the USB 
content browser.
6 Press  to select [Picture].
7 Press  to select an album of 
pictures and press OK.
Watch video from a USB device
1  In the USB content browser, press  to 
enter the [Video] folder.
2 Press  to select a video.
3 Press OK or  to play the video.
=	 Press OK or 
 to pause, press OK 
or 
 again to resume.
=	 Press 
 to search-for ward.
=	 Press 
 to search-backward.
=	 Press 
 to stop playback.
EN