Philips 32pfl5604 User Manual

							18
   
 
 
 
 
 
 
 
 
Start a TV demo
 
 
 
You can use demonstrations to better 
understand the features of your T V. Some 
demos are not available on cer tain models. 
When a demo is available, it is displayed in the 
menu list.
   
 
 
 
 
 
 
 
 
 
1 Press  DEMO 
 on the remote control.
 
 
 
 
2 Press   
  
 to select a demo and press  OK 
 
to view it.
   
 
 
3 Press  DEMO 
 to exit.
 
 
 
 
 
 
 
 
Reset the TV to factory 
settings
 
 
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
   
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Setup] 
 >  [Installation] 
 >  [Factory 
settings] 
.
 
 
 
 
3 Press  OK 
 or   
 to enter the  [Factory 
settings] 
 menu.
   
 
 
 
[Reset] 
 is highlighted.
 
 
 
 
 
 
4 Press  OK 
 to reset to factor y settings.
 
 
 
 
5 Press   
 ( Home 
) to exit. »
INCR.SURR SOURCE SUBTITLE
SCENEA SAPCC DEMOTVINCR.SURR SOURCE SUBTITLE
SCENEA SAPCC DEMOTV
   
 
 
 
 
 
Update software (analog broadcasts)
 
 
Before performing this procedure be sure to:
   
 
 
Set aside some time to complete the 
entire update.
   
 
 
Have available a USB storage device with 
at least 64MB of storage space.
   
 
 
Have access to a computer with a USB 
por t and internet access.
   
 
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Setup] 
 >  [Software update] 
 > 
  [Update assistant] 
.
 
 
 
 
3 Select  [Start] 
.
 
 
 
 
4  Connect the USB storage device to your 
computer.
   
 
 
5  Follow the on-screen instructions to 
complete the update.
   
 
 
 
 
 
 
Change TV  preferences
 
 
 
The  [Preferences] 
 menu allows you to 
customize various features and functions.
   
 
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Setup] 
 >  [Installation] 
 > 
  [Preferences] 
.
   
 
 
 
[Location] 
 : Optimizes T V settings 
for your location - home or shop.
   
 
 
 
[Volume bar] 
 : Displays the volume 
bar when adjusting the volume.
   
 
 
 
[EasyLink] 
 : Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
   
 
 
 
[Pixel Plus Link] 
 : Overrides the 
settings of connected devices and 
uses the settings of the T V.
   
 
 
 
[E-sticker] 
 : For shop mode only. 
Sets the location of the e-sticker. •
•
•
•
•
•
•
•
EN
 
						

							19
   
 
 
 
 
 
Step 2 Search and store new TV 
channels
 
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Press   
  
  
 to select  [Setup] 
 > 
  [Installation] 
 >  [Channel install.] 
 > 
  [Manual install] 
.
   
 
 
The  [Manual install] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
 to select and enter  [Search] 
.
 
 
 
 
4 Press   
  
 or use  Numeric buttons 
 to 
manually enter the three digit frequency.
   
 
 
5 Press  OK 
 to begin search.
 
 
 
 
6 Press   
 when the new channel is found.
 
 
 
 
7 Press   
  
 to select  [Store new channel] 
 
to store the new channel under a new 
channel number.
   
 
 
8 Press   
 to enter  [Store new channel] 
.
 
 
 
 
9 Press   
 to select  [Yes] 
 and press  OK 
 to 
store the new channel.
   
 
 
10 Press   
 ( Home 
) to exit.
 
 
 
 
 
 
 
 
Rename channels
 
 
Channels can be renamed so that a name of 
your choice appears whenever the channel is 
selected.
   
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid .
   
 
 
2  Select the channel you want to rename.
 
 
 
 
3 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.
 
 
 
 
 
 
4 Press   
  
 to select  
[Rename chan.]  and 
press  OK 
.
   
 
 
A text input box appears.
 
 
 
 
 
 
5 Press   
  
 to select a character and press  
 
 to add another character.
 
 
 
 
6 Select  [Done] .
 
 
7 Press  OK 
.    
 
 
 
  
 
 
 
»
»
»
   
 
 
 
 
 
 
 
6 Install channels
 
 
The  rst time you setup your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
reinstall and  ne tune channels.
   
 
 
Automatically install channels
 
 
This section describes how to search and store 
channels automatically.
   
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Installation] 
 >  [Channel install.] 
 
>  [Channel assistant] 
.
 
 
 
 
3 Press  OK 
.
 
 
 
 
4  Follow the on-screen instructions to 
install channels.
   
 
 
 
 
 
 
Manually install channels
 
 
This section describes how to search and store 
analog TV channels manually.
   
 
 
Step 1 Select your system
 
Note
 
Skip this step if your system set tings are 
correct.•
   
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Press   
  
  
 to select  [Setup] 
 > 
  [Installation] 
 >  [Channel install.] 
 > 
  [Manual install] 
   
 
 
The  [Manual install] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
 to select and enter  [System] 
.
 
 
 
 
4 Press   
  
 to select your countr y or 
region.
   
 
 
5 Press  OK 
 to con rm.
 
 
 
 
6 Press   
 ( Home 
) to exit. »
English
EN
 
						

							20
   
 
 
 
 
Rearrange channels
 
 
After you install channels, you can rearrange the 
order in which they appear.
   
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid .
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.
 
 
 
 
 
 
3 Press   
  
 
 
 to select and enter  [Reorder] 
.
 
 
 
 
4  Select the channel you want to reorder 
and press  OK 
.
 
 
 
 
5 Press   
  
  
 to select the new position 
for the channel.
   
 
 
6 Press  OK 
 to con rm the new position.
 
 
 
 
7 Press   
 
 OPTIONS 
.
   
 
 
 
[ Done reordering 
] 
 appears.
 
 
 
 
 
 
8 Press  OK 
 to  nish reordering. »
»
EN
 
						

							21
   
 
 
e  AV OUT  ( VIDEO OUT  and  AUDIO 
OUT L/R )
   
Audio and video output to analog devices 
such as another T V or a recording device.
   
 
 
f  AV1  ( VIDEO IN  and  AUDIO IN L /R )
   
Analog audio and video input from analog 
or digital devices such as DVD players, 
satellite receivers and VCRs.
   
 
 
g  CVI  1/2 (  Y Pb Pr  and  AUDIO L /R )
   
 
 
Analog audio and video input from analog 
or digital devices such as DVD players or 
game consoles.
   
 
 
 
Side connectors
 
 
  
 
 
 
 
a  USB 
   
Data input from USB storage devices.
   
 
 
b  HDMI 
   
Digital audio and video input from high-
de nition digital devices such as Blu-ray 
players.
   
 
 
c  S-VIDEO 
   
S-Video (side) to be used with Audio L /R 
connectors for camcorder, game console, 
etc. When you use the S-Video (side) for 
video signals, do not use the Composite 
video (side) input for video signals.
   
 
 
d  VIDEO 
   
Composite video input from analog 
devices such as VCRs.
1
2
3
6
5
4
1
2
3
6
5
4
   
 
 
 
 
 
 
 
7 Connect devices
 
 
This section describes how to connect 
various devices with different connectors and 
supplements examples provided in the Quick 
Star t.
  Note
 
Different types of connectors may be used to 
connect a device to your T V, depending on 
availability and your needs.•
   
 
 
Back connectors
 
 
  
 
 
 
 
a  HDMI  1/2
   
Digital audio and video input from high-
de nition digital devices such as Blu-ray 
players.
   
 
 
b  VGA /PC  and  PC AUDIO IN 
   
Audio and video input from a computer.
   
 
 
c  TV ANTENNA 
   
Signal input from an antenna, cable or 
satellite.
   
 
 
d  SERV. U 
   
For use by ser vice personnel only.
English
EN
 
						

							22
   
 
 
 
HDMI cable and HDMI-DVI adaptor 
 
 
  
 
 
 
 
 
VGA cable 
 
 
 
 
  
 
 
 
 
 
 
Use dual view
 
 
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Setup] 
 >  [Features] 
 >  [Dual 
View] 
.
 
 
 
 
3 Select  [On] 
.
 
 
 
 
4 Press  OK 
.
5 Press  OK to exit .
 
Note
 
When the dual view mode is turned on, a 
small window for T V input appears on the 
upper right-hand corner of the T V screen. The 
audio output is still from the VGA input.•
•
•
DVI
PC AUDIO IN/ PC IN(AUDIO)
DVI
PC AUDIO IN/ PC IN(AUDIO)
VGA
PC AUDIO IN/ PC IN(AUDIO)
VGA
PC AUDIO IN/ PC IN(AUDIO)
   
 
 
e  AUDIO L/R 
   
Audio input from analog devices 
connected to  VIDEO 
 or  S-VIDEO 
.
   
 
 
f  
 
   
 
 
Stereo audio output to headphones or 
earphones.
   
 
 
 
Connect a computer
 
 
 
Before you connect a computer to the TV 
   
 
 
Set the monitor refresh rate on your 
computer to 60Hz.
   
 
 
Press  
 
 
 FORMAT 
 and change the T V 
picture format to  [Unscaled] 
.
   
 
 
 
 
Connect a computer with one of the 
following connectors: 
 
Note
 
Connections via DVI or VGA require an 
additional audio cable.•
   
 
 
 
HDMI cable 
 
 
  
 
 
 
 
 
DVI-HDMI cable 
 
 
  
•
•
•
•
DVI
PC AUDIO IN/ PC IN(AUDIO)
DVI
PC AUDIO IN/ PC IN(AUDIO)
EN
 
						

							23
   
 
 
 
EasyLink features
 
 
 
One-touch play  
   
When you connect your T V to devices that 
suppor t one-touch play, you can control your 
T V and the devices with one remote control. 
For example, when you press Play on your 
DVD remote control, your T V automatically 
switches to the correct channel to show the 
DVD content. 
   
 
One-touch standby 
   
When you connect your T V to devices that 
suppor t standby, you can use your T V remote 
control to put your TV and all connected 
HDMI devices in standby mode.
   
 
System audio control 
   
When you connect your T V to HDMI 
CEC compliant devices, your T V can 
switch automatically to play audio from the 
connected device. 
   
To use one-touch audio, you must map the 
audio input from the connected device to 
your T V. 
   
You can use the remote control from the 
connected device to adjust the volume.
   
 
Remote control (RC) key forwarding 
   
RC key for warding allows you to control 
EasyLink-compliant devices using your T V 
remote control.
  Pixel Plus Link
Pixel Plus Link  overrides the settings of 
connected devices and uses the settings of the 
TV.
   
 
 
 
 
Add devices
 
 
After connecting devices, assign the device 
attached to each connector. This allows you to 
easily identify devices connected to your TV.
   
 
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Add new device] 
 and press  OK 
.
 
 
 
 
3 Select  [Start] 
 and press  OK 
.
 
 
 
 
4 Press   
 or   
 to select a device and press  
 
.
 
 
 
 
5 Press   
 or   
 to select the conector your 
device is connected to and press  
  .
 
 
 
 
6  If available, press   
 or   
 to select the 
audio connector your device is connected 
to and press  
  .
 
 
 
 
7  Switch on your device and check for 
video and audio output.
   
 
 
8  If there is video and audio output, press 
  OK 
.
   
 
 
Repeat the procedure until all devices are 
correctly assigned to connectors.
   
 
 
 
 
Use Philips EasyLink
 
 
 
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
  Note
 
Philips does not guarantee 10 0% 
interoperability with all HDMI CEC devices.•
  Note
 
The EasyLink-compliant device must be 
switched on and selected as the source.•
English
EN
 
						

							24
   
 
 
 
Enable or disable EasyLink
 
Note
 
Do not enable Philips EasyLink if you do not 
intend to use it.•
   
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Select  [Installation] 
 >  [Preferences] 
 > 
  [EasyLink] 
.
 
 
 
 
3 Select  [On] 
 or  [Of f ] 
.
 
 
 
 
 
 
 
Enable or disable remote control key 
forwarding
   
 
 
1 Press   
 
 OPTIONS 
.
 
 
 
 
2 Select  [En./Dis. RC pass.] 
.
 
 
 
 
3 Press  OK 
.
 
 
 
 
4 Press   
 or   
 to highlight an HDMI 
connector.
   
 
 
5 Press  OK 
 to enable RC key for warding 
for the selected HDMI connector.
   
 
 
 
 
 
 
 
Set TV speakers to EasyLink mode
 
 
When enabled, this feature automatically 
turns off T V speakers when content from an 
EasyLink-compliant home theater system is 
played. Audio is played only from the home 
theater system’s speakers.
   
 
 
1 Press   
 ( Home 
).
 
 
 
 
2 Press   
  
  
 to select  [Setup] 
 >  [Sound] 
.
   
 
 
The  [Sound] 
 menu appears.
 
 
 
 
 
 
3 Select  [TV speakers] 
.
   
 
 
The  [TV speakers] 
 menu appears.
 
 
 
 
 
 
4 Select  [Auto (EasyLink)] 
.
   
 
 
TV speakers are set to EasyLink mode. »
»
»
   
 
 
 EasyLink buttons
 
 
You can control EasyLink-compliant devices 
with the following buttons on the remote 
control of your T V.
   
Button 
 
EasyLink function
   
 
 ( Play/
Pause 
)  Star ts, pauses or resumes 
playback on your EasyLink 
device.
   
 
 ( Stop 
) Stops playback on your EasyLink 
device.
   
 
 ( Record 
) Star ts or stops video recording 
on your EasyLink device.
   
 
 ( Fast 
Backward 
)  Searches backward.
   
 
 ( Fast 
Forward 
)  Searches forward.
   
0-9 
 
( Numeric 
buttons 
)  When EasyLink is enabled, 
selects a title, chapter or track.
   
 
  
  
Navigates through the menus of 
the EasyLink-compliant device.
   
OK 
Activates a selection or accesses 
the menu of the EasyLink-
compliant device.
   
 
 
 
OPTIONS  Displays the menus of the 
EasyLink-compliant device. Note 
that when  
   ( Home 
) is pressed, 
the T V menu is displayed.
   
 
( Standby-
On 
)  When EasyLink is enabled, 
switches the T V and all EasyLink 
devices to standby. Note that 
you must press and hold  
   
( Standby-On 
) for at least 3 
seconds for this to occur.
  Tip
 
Press  TV 
 to switch back to the antenna source 
from EasyLink mode.•
EN
 
						

							25
   
 
 
 
 
 
 
 
 
Use a Kensington lock
 
 
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
   
 
  
English
EN
 
						

							26
   
 
 
 
 
Tuner/Reception/
Transmission
   
 
 
 
Antenna input: 75ohm coaxial (IEC75)
   
 
 
T V system: NTSC , PAL-M, PAL-N
   
 
 
Video playback: NTSC, SECAM, PAL
 
 
 
 
 
 
 
 
Multimedia
 
 
 
 
 
Connection: USB
   
 
 
Playback formats: MP4, RM, RMVB, JPEG, 
MP3
Container Video 
CodecAudio 
CodecFile 
extension
mpeg1 MPEG -1 MPEG 
audio.dat
.mpg
mpeg4 MPEG -4 AAC/
HE-AAC.avi
.mp4
RealMedia Real Media 
8/9/10AAC, 
Cook.rm
.rmvb
   
 
 
 
 
 
 
Remote control
 
 
 
 
 
Batteries: 2 x A A A (R03 type)
 
 
 
 
 
 
 
 
Connections
 
 
 
 
 
Headphone out (stereo mini-jack)
   
 
 
TV antenna
   
 
 
S-Video
   
 
 
CVBS in
   
 
 
CVBS out
   
 
 
YPbPr: Component video (CVI in)
   
 
 
VGA in
   
 
 
HDMI
   
 
 
VGA Audio in
   
 
 
USB
   
 
 
Service connector •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
   
 
 
 
 
 
8 Product 
information
   
Product information is subject to change 
without notice. For detailed product 
information, go to www.philips.com/suppor t.
   
 
 
Supported display resolutions
 
 
 
Computer formats
   
HDMI:
 
 
Resolution   
Refresh rate (Hz)
640x480
800x600
1024x768
128 0 x76 8
128 0 x 10 24
13 6 0 x 76 860, 72, 75, 85
60, 72, 75, 85   
60, 70, 75, 85
60
60
60
   
VGA:
 
 
Resolution   
Refresh rate (Hz)
640x480
800x600
1024x768
128 0 x76 8
128 0 x 10 24
13 6 0 x 76 860, 72, 75, 85
60, 72, 75, 85
60, 70, 75, 85
60
60
60
   
Video formats
 
 
Resolution   
Refresh rate (Hz)
720 x 480p
720 x 480i 
720 x 576p 
720 x 576i 
1280 x 720p 
1280 x 720p
1920 x 1080i
1920 x 10 8 0 p60
60
50
50
60
50
50, 60
24, 25, 30, 50, 60
EN
 
						

							27
   
 
 
 
 
 
 
Power
 
 
 
 
 
Mains power: AC 110 -240V; 50 -60Hz
   
 
 
Standby power: < 0.15W
   
 
 
Ambient temperature: 5 to 35 degrees 
Celsius
   
 
 
 
 
 
 
Supported TV  mounts
 
 
To mount the TV, purchase a Philips TV mount 
or  a VESA-compatible TV  mount. To  prevent 
damage to cables and connectors, be sure to 
leave a clearance of at least 5.5 cm from the 
back of the TV.
  Warning
 
Follow all instructions provided with the T V 
mount. Koninklijke Philips Electronics N.V. 
bears no responsibility for improper T V 
mounting that results in accident, injur y or 
damage.•
   
TV 
screen 
size   
VESA-compatible wall 
bracket type 
  32”-37”  200 x 200 mm  M6
  42”- 47 ”  400 x 400 mm  M6 (42”), 
M8 (47”) •
•
•
English
EN