Philips 32pfl3615 User Manual

19
  Tip
 
The device name can be up to six characters   •
long.
   
Press  
  •[Aa] 
 to change uppercase let ter to 
lowercase let ter and vice versa.
   
 
 
 
 
Rearrange channels
 
 
After you install channels, you can rearrange the 
order in which they appear.
   
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid.
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   »
 
 
 
 
 
 
3 Press   
  
 to select  [Reorder] 
, then press 
  OK 
.
 
 
 
 
4  Select...

20
   
 
 
a  TV ANTENNA 
   
Signal input from an antenna, cable or 
satellite.
   
  
 
 
 
 
b  AUDIO OUT 
   
Analog audio output to home theaters 
and other audio systems.
   
  
 
 
 
 
c  CVI 1 / CVI 2  ( Y Pb Pr  and  AUDIO L /R ) 
   
Analog audio and video input from analog 
or digital devices such as DVD players or 
game consoles.
   
  
TV ANTENNA
AUDIOOUTAUDIOIN
 
 
 
 
 
 
 
 
 
7 Connect devices
 
 
This section describes how to connect 
various devices with different connectors and...

21
   
 
 
 
Side connector
 
 
  
 
 
 
 
a  AUDIO L/R 
   
Audio input from analog devices 
connected to  VIDEO 
.
 
 
  
 
 
 
 
d  PC IN  ( VGA  
 / PC  and  AUDIO IN ) 
   
Audio and video input from a computer.
 
 
  
 
 
 
 
e  HDMI 1  /  HDMI 2 
   
Digital audio and video input from high-
de nition digital devices such as Blu-ray 
players.
   
  
 
 
Connections via DVI or VGA require an 
additional audio  cable . 
   
 
 
f  SERV. U 
   
 
 
For use by ser vice personnel only.
VGA
PC AUDIO IN...

22
   
 
 
 
Connect a computer
 
 
 
Before you connect a computer to the TV 
   
 
 
Set the monitor refresh rate on your  • 
computer to 60Hz.
   
 
 
Press   • 
 
 
 FORMAT 
 and change the T V 
picture format to  [Unscaled] 
.
   
 
 
 
 
Connect a computer with one of the 
following connectors: 
 
Note
 
Connections via DVI or VGA require an   •
additional audio cable.
 
 
 
 
  • HDMI cable 
 
 
  
 
 
 
 
  • DVI - HDMI cable 
 
 
  
DVI
PC AUDIO IN/ PC IN(AUDIO)
 
 
 
 
b  VIDEO 
   
Composite...

23
   
 
 
 
 
Use Philips EasyLink
 
 
 
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
  Note
 
The EasyLink-compliant device must be   •
switched on and selected as the source.
   
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC devices.
 
 
 
 
 
EasyLink features
 
 
 
One-touch play  
   
When you...

24
   
 
 
 
 
 
 
Use a Kensington lock
 
 
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
   
 
  
 
 
 
 
 
Enable or disable EasyLink
 
Note
 
Do not enable Philips EasyLink if you do not   •
intend to use it.
 
 
 
 
1 Press  MENU 
.
 
 
 
 
2 Press   
  
  
 to select  [Setup] 
 > 
  [Installation] 
 >  [Preferences] 
 > 
  [EasyLink] 
.
 
 
 
 
3 Select  [On] 
 or  [Of f ] 
....

25
   
 
 
 
 
 
 
 
 
Multimedia
 
 
 
 
 
Suppor ted storage device: USB (Only  • 
FAT 16 or FAT 32 USB storage devices 
are suppor ted) 
   
 
 
Suppor ted multimedia  le formats: • 
   
 
 
Images: JPEG • 
   
 
 
Audio: MP3 • 
 
Note
 
Multimedia  le names must not exceed 128   •
characters. 
 
 
 
 
 
 
Tuner/Reception/
Transmission
   
 
 
 
Antenna input: 75ohm coaxial (IEC75) • 
   
 
 
T V system: NTSC , PAL-M, PAL-N • 
   
 
 
Video playback: NTSC , PAL • 
 
 
 
 
 
 
 
 
Remote control...

26
   
 
 
 
 
Product speci cation
 
 
Design and speci cations are subject to change 
without notice.
   
  
 
 
 
 
32PFL3605 
   
 
 
Without T V stand • 
   
 
 
Dimension ( WxHxD): 795.6 x 508.3  • 
x 93 (mm)
   
 
 
Weight: 8.3 kg • 
   
 
 
 
 
With T V stand • 
   
 
 
Dimension ( WxHxD): 795.6 x 556.2  • 
x 221. 5 (mm)
   
 
 
Weight: 9.9 kg • 
   
 
 
 
 
 
32PFL3615  
   
 
 
Without T V stand • 
   
 
 
Dimension ( WxHxD): 795.6 x 508.3  • 
x 93 (mm)
   
 
 
Weight: 8.3 kg •...

27
   
 
 
Cannot remove ‘e-sticker’ banner displayed on 
the TV.
   
To remove the logos and images, set the    •
location of your T V to home.
   
1. Press  MENU 
.
   
2. Select  [Setup] 
 >  [Installation] 
 >  
  [Preferences] 
 >  [Location] 
.
   
3. Select  [Home] 
, then press  OK 
. 
 
 
 
 
 
 
TV channel issues
 
 
 
Previously installed channels do not appear in 
the channel list:
   
Check that the correct channel list is    •
selected.
   
 
 
 
 
Picture issues
 
 
 
The TV is on, but...

28
   
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
   
If you use an HDMI-to-DVI adapter    •
or HDMI to DVI cable, check that an 
additional audio cable is connected to 
  AUDIO IN 
 (mini - jack onl y).
 
 
 
 
 
 
Computer connection issues
 
 
 
The computer display on the TV is not stable:
   
Check that your PC uses the suppor ted    •
resolution and refresh rate.
   
Set the T V picture format to unscaled.   •
 
 
 
 
 
 
Contact...