Philips 32pfl3406h User Manual

							16
• [Colour enhancement] : Make colours 
more vivid and improve the details 
in bright colours. You can switch this 
feature on or off.
•  [Gamma]: For selected models. Adjust 
the midtone intensity in the picture. 
Black and white are not affected.
•  [PC mode] : Adjust the picture when a PC 
is connected to the TV via HDMI or DVI.
•  [Light sensor] : Adjust settings dynamically 
based on the current lighting conditions.
•  [Picture format]: Change the picture 
format. 
•  [Screen edges] : Adjust the viewing area. 
(when set to maximum, you may see noise 
or the rough edge of an image).
•  [Picture shift]: If available, adjust the picture 
position for all picture formats except for 
[Auto zoom]  and [Wide screen].
Change picture format
1 Press  ADJUST.
2 Select  [Picture format] , then press OK.
3 Select a picture format, then press  OK.
Summary of picture formats
The following picture settings can be configured.
Note
 
•
Depending on the format of the picture source, some 
picture settings are not available.
Manually adjust picture settings
1 Press .
2 Select  [Setup] > [TV settings]  > [Picture], 
then press OK.
3  Select one of the following settings, then 
press OK.
•  [Smart picture]: Access predefined smar t 
picture settings.
•  [Reset]: Reset to factor y default settings. 
•  [Contrast] : Adjust the intensity of backlight 
areas, while the video contents are kept 
unchanged.
•  [Brightness] : Adjust the intensity and 
details of dark areas.
•  [Colour]: Adjust colour saturation.
•  [Hue]: Compensate for colour variations.
•  [Sharpness] : Adjust sharpness in the image.
•  [Noise reduction]: Filter and reduce noise 
in an image.
•  [Tint]: Adjust the colour balance in an 
image. 
•  [Custom tint]: Customise tint setting. 
(Only available if [Tint] > [Custom] is 
selected)
•  [Digital Crystal Clear]  / [Pixel Plus] / 
[Pixel Plus HD]: Fine-tune each pixel to 
match surrounding pixels. This setting 
produces a brilliant, high-definition image.
•  [HD Natural Motion] : For selected 
models. Minimise juddering effects and 
enhance picture smoothness. 
•  [100Hz Clear LCD] /  [120Hz Clear 
LCD]: For selected models. Reduce 
motion blurring and make picture 
clearer. 
•  [Advance sharpness] : Enable superior 
picture sharpness.
•  [Dynamic contrast] : Enhance contrast. 
[Medium] setting is recommended.
•  [Dynamic backlight]: Adjust  brightness 
of the TV backlight to match lighting 
conditions.
•  [MPEG artifact reduction]: Smooth 
out transitions on digital pictures. You 
can switch this feature on or off.
EN
 
[Auto format]: For 
selected models. (Not for 
PC  mode.) Automatically 
display the suitable picture 
format. If not, widescreen is 
applied.
 
[Auto fill]: For selected 
models. Adjust  the 
picture to fill the screen 
(subtitles remain visible). 
Recommended for minimal 
screen distor tion but not 
for HD or PC .
 
						

							17
English
• [News]: Ideal settings for spoken 
audio, such as news.
•  [Cinema]: Ideal settings for movies. 
•  [Game]: Ideal settings for games.
•  [DRAMA]: Ideal settings for drama 
programmes.
•  [Sports]: Ideal settings for spor ts 
programmes.
Manually adjust sound settings
1 Press .
2 Select  [Setup] > [TV settings]  > [Sound], 
then press OK.  
» The [Sound] menu appears.
3 Select one of the following settings, then 
press OK.
•  [Smart sound] : Access predefined smar t 
sound settings.
•  [Reset]: Reset to factor y default settings.
•  [Clear sound] : Enhance the sound clarity.
•  [Bass] : Adjust the bass level.
•  [Treble]: Adjust the treble level.
•  [Surround]: Switch on spatial sound.
•  [Incredible Surround] : (For selected 
models) Enhanced spatial sound for 
increased surround effect.
•  [Headphone volume]: (For models with 
headphones) Adjust headphone volume.
•  [Auto volume levelling]: Automatically 
reduce sudden volume changes, for 
example when switching channels.
•  [Balance]: Adjust the balance of the right 
and left speakers.
•  [Digital output format] : Select the type of 
digital audio output through digital audio 
output connector.
•  [PCM]: Conver t non-PCM audio type 
to PCM format.
•  [Multichannel]: Output audio to the 
home theatre.
 
[Auto zoom] : For selected 
models. Enlarge the 
picture to fill the screen. 
Recommended for minimal 
screen distor tion but not 
for HD or PC .
 
[Super zoom] : (Not 
for HD and PC mode.) 
Remove the black bars on 
the side of 4:3 broadcasts. 
There is minimal distor tion.
 
[4:3]: Show the classic 4:3 
format.
 
[Movie expand 16:9]: (Not 
for HD and PC mode.) 
Scale 4:3 format to 16:9.
 
[Wide screen]: Scale 4:3 
format to 16:9.
 
[Unscaled] : For HD and 
PC mode only, and in 
selected models only. Allow 
maximum sharpness. Some 
distor tion may be present 
due to the broadcaster’s 
systems. Set your PC 
resolution to wide screen 
mode for best results.
Use smart sound
Use smar t sound to apply pre-defined sound 
settings.
1 Press  ADJUST.
2 Select  [Smart sound] , then press OK.
3 Select one of the following settings, then 
press OK.
•  [Personal] : Apply the settings that 
were customised in the sound menu.
•  [Standard]: Settings that suit most 
environments and types of audio.
EN
 
						

							18
Use advanced teletext 
features
Access the teletext options menu
Access the teletext features through the 
teletext options menu.
1 Press TEXT.
 
» The teletext screen appears.
2 Press  OPTIONS.
 
» The teletext options menu appears.
3 Select one of the following options, then 
press OK.
•  [Freeze page]  / [Unfreeze page] : 
Freeze/unfreeze the current page.
•  [Dual screen] / [Full screen]: Switch 
between full screen and dual screen 
teletext.
•  [T.O.P. overview]: Switch on Table of 
Pages teletext broadcasts 
•  [Enlarge] /  [Normal view]: Switch 
between enlarged and normal view of 
teletext pages. 
•  [Reveal]: Hide or reveal hidden 
information on a page, such as 
solutions to riddles or puzzles. 
•  [Cycle subpage] : If subpages are 
available, automatically display each 
subpage in sequence.
•  [Languages] : Select a language for 
teletext.
Select teletext subpages
A teletext page can contain several subpages. 
Subpages are displayed next to the main page 
number.
1 Press  TEXT.
 
» The teletext screen appears.
2 Press  or  to select a teletext page.
3 Press  or  to enter a subpage.
Use the universal access 
menu
You can activate the universal access menu 
during the first installation. Once enabled, you 
can quickly access the visually impaired and 
hearing impaired menus when watching TV or 
external devices.
1 While you watch TV, press  OPTIONS.
 
» The TV options menu appears.
2 Select  [Universal access] , then press OK.
3 Select one of the following options, then 
press OK.
•  [Hearing impaired]: Enable or disable 
hearing impaired subtitles.
•  [Visually impaired]: Some digital TV 
channels broadcast special audio adapted 
for people who are visually impaired. 
The normal audio is mixed with extra 
commentar y. Use the colour buttons to 
select the options: 
• Red ([Off]): Turn off visually impaired 
audio.
•  Green ([Speakers]): Hear visually 
impaired audio from speakers only
•  Yellow ([Headphone] ): Hear visually 
impaired audio from headphones only. 
•  Blue ([Speaker + headphone] ): Hear 
visually impaired audio from both 
speakers and headphone. 
•  [Mixed volume]: Adjust the volume of 
visually impaired audio.
•  [Key beep]: Switch on audio feedback 
when buttons are pressed on the remote 
control  or TV.
Tip
 
•
Press the colour buttons on the remote control to 
enter the options.
EN
 
						

							19
English
3 Select [Select list] > [Favourites], then 
press OK.  
» Only channels in the favourites list 
appear in the channel grid.
Note
 
•
The favourites channel grid is empty until you add 
channels into the favourites list.
View all channels
You can exit the favourites list, and view all 
installed channels.
1  While you watch TV, press  FIND.
 
» The channel matrix menu is displayed.
2 Press  OPTIONS.
3 Select  [Select list] > [All], then press OK. 
 
» All channels are displayed in the 
channel grid.
Note
 
•
All favourite channels are marked by an asterisk when 
you view the channel grid.
Manage the favourites list
1  While you watch TV, press  FIND.
 
» The channel matrix menu appears.
2 Press  OPTIONS.
3 Select  [Select list] > [All], then press OK.
4 Press  OPTIONS.
5 Select [Mark as favourite] or [Unmark as 
favourite], then press  OK.
 
» The channel is added or removed from 
the favourite list.
Note
 
•
All favourite channels are marked by an asterisk in the 
channel grid.
Select T.O.P. teletext broadcasts
Jump from one subject to another without 
entering page numbers with Table Of Pages 
(T.O.P.) teletext broadcasts. T.O.P. teletext 
broadcasts are available on selected TV 
channels.
1 Press  TEXT.
 
» The teletext screen appears.
2 Press  OPTIONS.
3 Select  [T.O.P. overview], then press  OK.
 
» The T.O.P. over view appears.
4 Select a subject.
5 Press  OK to view the page.
Use Teletext  2.5
Teletext 2.5 offers more colours and better 
graphics than normal teletext. If Teletext 2.5 
is broadcast by a channel, it is switched on by 
default.
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Teletext 2.5].
3 Select  [On] or [Off], then press  OK to 
confirm.
Create and use lists of 
favourite channels
You can create a list of your preferred TV 
channels so that you can find those channels 
easily.
View only the list of favourite 
channels
1  While you watch TV, press  FIND.
 
» The channel matrix menu is displayed.
2 Press  OPTIONS.
EN
 
						

							20
• [Scheduled reminders]: List 
programme reminders. Only available 
for upcoming programmes.
•  [Acquire EPG data] : Update the latest 
programme guide information.
Display the TV clock
You can display a clock on the TV screen. The 
clock displays the current time using time data 
received from your TV ser vice operator.
Set the TV clock manually
In some countries, you need to set TV clock 
manually.
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Clock].
3 Select  [Auto clock], then press  OK.
4 Select [Manual], then press  OK. 
5 Select [Time] or [Date], then press  OK.
6 Press the  Navigation buttons  to set the 
time or date.
7 Select  [Done], then press  OK.
8 Press  to exit.
Note
 
•
If your selected countr y suppor ts digital broadcast, 
the clock displays the time data from your TV ser vice 
operator as priority.
Display the TV clock
1  While you watch TV, press  OPTIONS.
 
» The options menu is displayed.
2 Select  [Clock].
 
» The clock is displayed.
3 Press  OK.
Note
 
•
To disable the clock, repeat the procedure.
Use the Electronic 
Programme Guide
The programme guide is an on-screen guide 
available for digital channels. It allows you to:
•  View a list of digital programmes being 
broadcast
•  View upcoming programmes
•  Group programmes by genre
•  Set reminders when programmes star t
•  Setup preferred programme guide 
channels
Switch on EPG
1 Press .
2 Select  [Programme guide] , then pressOK.
 
» The programme guide appears 
displaying information about the 
scheduled programmes.
Note
 
•
Programme guide data is available only in selected 
countries and can take some time to load.
Change programme guide options
You can set or clear reminders, change the 
day, and access other useful options in the 
programme guide options menu.
1 Press .
2 Select  [Programme guide] , then press OK.
3 Press  OPTIONS.
 
» The programme guide menu appears.
4 Select one of the following options, then 
press OK.
•  [Set reminder] /  [Clear reminders]: 
Set or clear programme reminders.
•  [Change day]: Set the programme 
guide day.
•  [More info]: Display programme 
information.
•  [Search by genre]:  Search TV 
programmes by genre.
EN
 
						

							21
English
Use timers
You can set timers to switch the TV to standby 
at a specified time.
Tip
 
•
Set the TV clock before you use timers.
Automatically switch the TV to 
standby (sleep timer)
Sleep timer switches the TV to standby after a 
pre-defined duration.
Tip
 
•
You can switch off your TV earlier or reset the sleep 
timer during the countdown.
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Sleep timer].  
» The [Sleep timer] menu appears.
3 Select a value between zero and 180 
minutes.
 
» If you select zero, the sleep timer 
switches off.
4 Press  OK to switch on the sleep timer.
 
» The TV switches to standby after the 
specified time.
Change the clock mode
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Clock] > [Auto clock].
3 Select  [Automatic] or [Manual], then press 
OK.
Change the time zone
Note
 
•
This option is only available if you select [Auto clock] > 
[Automatic] (in countries with clock transmission data).
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Clock] > [Time zone].
3  Select your time zone.
4 Press  OK to confirm.
Use daylight saving
Note
 
•
This option is only available if you select [Auto clock 
mode]  > [Manual].
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Clock] > [Daylight 
saving], then press OK.
3 Select  [Standard time] or [Daylight saving 
time], then press  OK.
EN
 
						

							22
6 To activate the locks, switch the TV on and 
off. 
 
» When you switch channels with  
CH - or CH +, the locked channels are 
skipped.
 
» When you access the locked channels 
from the channel grid, you are 
prompted to enter your PIN code.
Set parental ratings
Some digital broadcasters rate their 
programmes according to age. You can set your 
TV to display only programmes with age ratings 
lower than your child’s age.
1 Press .
2 Select  [Setup] > [Channel settings]  > 
[Child lock] > [Parental rating].  
» A code setup screen appears.
3 Enter your code using Numeric buttons .
 
» The rating menu appears.
4 Select an age rating, then press  OK.
5 Press  to exit.
View Scenea
You can display a default picture as the 
wallpaper on your TV. You can also load another 
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed 
for 240 minutes. Otherwise, it is displayed for 
the duration of the sleeptimer.
Switch on Scenea
1 Press .
2 Select [Scenea], then press  OK.
 
» If no picture has been set, the default 
picture is displayed. 
 
» If a customised Scenea picture is 
loaded, that picture is displayed (see 
‘Customise the Scenea picture’ on 
page 23).
Lock unsuitable content
You can prevent your children from watching 
cer tain programmes or channels by locking the 
TV controls. 
Set or change code
1 Press .
2 Select  [Setup] > [Channel settings]  > 
[Child lock].
3 Select  [Set code]  or [Change code] .
 
» The [Set code]  / [Change code]  menu 
appears.
4  Enter your code using the Numeric 
buttons .
 
» Follow the on-screen instructions to 
create or change your PIN code.
Tip
 
•
If you forget your code, enter ‘8888’ to override any 
existing codes.
Lock or unlock one or more channels
1 Press .
2 Select  [Setup] > [Channel settings]  > 
[Child lock] > [Channel lock].   
» A list of channels is displayed.
3 Select the channel that you want to lock or 
unlock, then press  OK.
 
» The first time you lock or unlock a 
channel, you are prompted to enter 
your PIN code.
4 Enter your code and press  OK.
 
» If the channel is locked, a lock icon is 
displayed.
5 Repeat the process to lock or unlock more 
channels.
EN
 
						

							23
English
Change audio language
You can choose an audio language if it is 
available from your broadcaster. For digital 
channels, multiple languages may be available. 
For analogue channels, two languages may be 
available. 
1 While you watch TV, press  OPTIONS. 
2 For digital channels, select  [Audio 
language] , select the language, then press 
OK. 
3  For analogue channels, select  [Dual I-II], 
select either language, then press  OK. 
Show or hide subtitles
1 While you watch TV, press  SUBTITLE.
2 Select one of the following, then press  OK.
•  [Subtitles on]: Always display subtitles.
•  [Subtitles off]: Never display subtitles.
•  [On during mute]: When audio is 
muted, display subtitles.
Note
 
•
Repeat this procedure to enable subtitles on each 
analogue channel.
 
•Select [Subtitles] > [Subtitles off] to disable subtitles.
Select a subtitle language in digital 
channels
Note
 
•
When you select a subtitle language in a digital TV 
channel as described below, the preferred subtitle 
language set in the installation menu is temporarily 
overruled.
1  While you watch TV, press  OPTIONS.
2 Select  [Subtitle language], then press  OK. 
3 Select a subtitle language.
4 Press  OK to confirm.
Customise the Scenea picture
You can load another picture as the wallpaper. 
Note
 
•
When you load a new Scenea picture, it overrides the 
current Scenea picture.
 
•To use another picture as the wallpaper, you need a 
USB storage device that contains a picture that is less 
than 1 MB in size.
1  Load a picture smaller than 1MB in size 
into a USB storage device.
2 Connect the USB storage device to the TV.
3 Press .
4 Select  [Browse USB], then press  OK.
5 Select a picture, then press  OPTIONS.
6 Select  [Set as Scenea] , then press OK.
7 Press any button to exit Scenea.
Change language
Depending on your broadcaster, you can change 
the audio language, subtitle language, or both, 
for a TV channel. 
Multiple audio languages, subtitles, or both, are 
broadcast through teletext or DVB-T digital 
broadcasts. Dual sound broadcasts: With digital 
broadcasts, you can select a subtitle language.
Change menu language
1 Press .
2 Select  [Setup] > [TV settings]  > 
[Preferences] > [Menu language] , then 
press OK.
3  Select a language, then press  OK.
EN
 
						

							24
Change slide show settings
1 While you view a slide show, press   
 OPTIONS.
 
» The slide show options menu is 
displayed.
2 Select one of the following, then press  OK.
•  [Start/Stop slideshow]: Star t or stop 
slideshow. 
•  [Slideshow transitions]: Set the 
transition from one picture to the 
next.
•  [Slideshow frequency]: Select the 
display time for each photo.
•  [Repeat] /  [Play once]: View  the 
pictures in the folder once only, or 
repeatedly. 
•  [Shuffle off] /  [Shuffle on]: View  the 
pictures in sequential order, or at 
random.
•  [Rotate image] : Rotate photo.
•  [Show info]: Display the picture name, 
date, size and next picture in the slide 
show.
•  [Set as Scenea] : Set the selected 
picture as the TV wallpaper (see ‘View 
Scenea’ on page 22).
3  To return, press .
Note
 
•
[Rotate image]  and [Show info] appear only when the 
slideshow is paused.
Listen to music
1  In the USB browser, select  [Music], then 
press OK.
2  Select a music track or album, then press 
OK to play.
3 To control play, press the play buttons: 
• 
 to play.
• 
 to pause.
• 
 or  to play the previous or next 
track.
• 
 or  to search forward or 
backward. 
• 
 to stop. 
Play photos, music and videos 
on USB storage devices
Caution
 
•
Philips is not responsible if the USB storage device is 
not suppor ted, nor is it responsible for damage or loss 
of data from the device.
Connect a USB storage device to play photos, 
music or videos stored on it.
1  Switch on the TV.
2 Connect the USB device to the USB por t 
on the side of your TV.
3 Press .
4 Select  [Browse USB], then press  OK.
 
» The USB browser appears.
View photos
1 In the USB browser, select  [Picture], then 
press OK.
2  Select a photo or a photo album, then 
press OK to view the photo enlarged to 
fill the TV screen.
•  To view the next or previous photo, 
press 
.
3 To return, press .
View a slide show of your photos
1 When a full screen image of a photo is 
displayed, press  OK.
 
» A slide show begins from the selected 
photo.
•  Press the following buttons to control play:
• 
 to play.
• 
 to pause.
• 
 or  to play the previous or next 
photo.
• 
 to stop. 
•  To return, press 
.
EN
 
						

							25
English
View a slideshow with music
You can view a picture slide show with 
background music.
1 Select an album of songs.
2 Press  OK.
3 Press  to return to the USB content 
browser.
4  Select an album of pictures.
5 Press  OK.
 
» The slideshow begins. 
6 To exit, press .
Disconnect a USB storage device
Caution
 
•
Follow this procedure to avoid damage to your USB 
storage device.
1 Press  to exit the USB browser.
2  Wait for five seconds, then disconnect the 
USB storage device.
Listen to digital radio 
channels
1
 Press  FIND.
 
» The channel matrix menu is displayed.
2 Press  OPTIONS, then select  [Select 
list] > [Radio] .
 
» The radio channel grid appears.
3 Select a radio channel and press  OK to 
listen.
Change music settings
•  While you play music, press  OPTIONS 
to access one of the following settings, 
then press OK.
•  [Stop playback]: Stop music play.
•  [Repeat]: Play a song once or 
repeatedly. 
•  [Shuffle on]  / [Shuffle off]: Play songs 
in sequence or at random. 
•  [Show info]: Display the file name.
Watch video
1 In the USB browser, select  [Video], then 
press OK.
2 Press  OK to play.
3 To control play, press the play buttons: 
• 
 to play.
• 
 to pause.
• 
 or  to play the previous or next 
video.
• 
 or  to search forward or 
backward.
• 
 to stop.
Change video settings
•  While you play video, press  OPTIONS 
to access one of the following settings, 
then press OK.
•  [Stop playback]: Stop video play.
•  [Repeat]: Play once or repeatedly. 
•  [Full screen] / [Small Screen]: View 
the video stretched to fill the screen, 
or view it in its native picture format. 
•  [Shuffle on]  / [Shuffle off]: Play in 
sequence or at random.
•  [Show info]: Display the file name.
EN