Philips 32pfl3404 User Manual

							19
   
 
 
4 Press   
  
 to select your countr y or 
region.
   
 
 
5 Press  OK 
 to confi rm.
 
 
 
 
6 Press   
 
 MENU 
 to exit.
 
 
 
 
 
 
 
Step 2 Search and store new TV 
channels
   
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Channel inst all.] 
 
>  [Analogue: Manual] 
.
   
 
 
The     È[Analogue: Manual] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
  
 to select and enter  [Search] 
.
 
 
 
 
4 Press   
  
 or use  Numeric buttons 
 to 
manually enter the three digit frequency.
   
 
 
5 Press  OK 
 to begin search.
 
 
 
 
6 Press   
 when the new channel is found.
 
 
 
 
7 Press   
  
 to select  [Store new channel] 
 
to store the new channel under a new 
channel number.
   
 
 
8 Press   
 to enter  [Store new channel] 
.
 
 
 
 
9 Press   
  
 to select  [Yes] 
 and press  OK 
 to 
store the new channel.
   
 
 
10 Press   
 
 MENU 
 to exit.
 
 
 
 
 
 
 
Fine tune analogue channels
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Channel inst all.] 
 
>  [Analogue: Manual] 
.
   
 
 
The     È[Analogue: Manual] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
  
 to select and enter  [Fine-
tune] 
.
 
 
 
 
4 Press   
  
 to adjust frequency.
 
 
 
 
5 Press  OK 
 when done.
 
 
 
 
6 Press   
  
 to select  [Store cur. chan.] 
 to 
store channel number.
   
 
 
7 Press   
 to enter  [Store cur. chan.] 
.
 
 
 
 
8 Press   
  
 to select  [Yes] 
 and press  OK 
 to 
store current channel.
   
 
 
9 Press   
 
 MENU 
 to exit.
 
 
 
 
8 Press  OK 
 to confi rm your choice.
 
 
 
 
9  When done, press   
 
 MENU 
 to exit.
 
 
 
 
 
 
 
 
Manually install channels
 
 
This section describes how to search and store 
analogue TV channels manually.
   
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Channel inst all.] 
 
>  [Analogue: Manual] 
   
 
 
The     È[Analogue: Manual] 
 menu appears.
 
 
  
 
 
 
 
 
 
3 Press   
  
 to select the item you want to 
adjust.
   
 
 
  • [System] 
   
 
 
  • [Search] 
   
 
 
  • [Fine-tune] 
   
 
 
  • [Store cur. chan.] 
   
 
 
  • [Store new channel] 
 
 
 
 
 
 
 
 
 
Step 1 Select your system
 
Note
 
Skip this step if your system set tings are correc t.  •
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Channel inst all.] 
 
>  [Analogue: Manual] 
   
 
 
The     È[Analogue: Manual] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
  
 to select and enter 
  [System] 
.
Menu language
Channel install.
Preferences
Decoder
Factory settings
Current softwareChannel assistant
Analogue: ManualPicture
Sound
Features
Installation
English
EN
 
						

							20
   
 
 
 
 
 
 
Rename channels
 
 
Channels can be renamed so that a name of 
your choice appears whenever the channel is 
selected.
   
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid .
   
 
 
2  Select the channel you want to rename.
 
 
 
 
3 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
4 Press   
  
  
  
 to select and enter  [Rename 
chan.] 
.
   
 
 
A text input box appears.   È
 
 
 
 
 
 
5 Press   
  
  
  
 to select characters.
 
 
 
 
6 Press  OK 
 to confi rm each of the 
characters.
  Tip
 
Rename channels - the leng th of the name is limited   •to six char ac ter s.
   
Use    •[Aa] 
 to change upper-case let ter to lower-case 
letter and vice versa.
   
 
 
 
 
Rearrange channels
 
 
After you install channels, you can rearrange the 
order in which they appear.
   
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid .
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
3 Press   
  
  
  
 to select and enter 
  [Reorder] 
.
 
 
 
 
4  Select the channel you want to reorder 
and press  OK 
.
 
 
 
 
5 Press   
  
  
  
 to select the new position 
for the channel.
   
 
 
6 Press  OK 
 to confi rm the new position.
 
 
 
 
7 Press   
 
 OPTIONS 
.
   
 
 
    È[ 
Done reordering ] 
 appears.
 
 
 
 
 
 
8 Press  OK 
 to fi nish reordering.
EN
 
						

							21
   
 
 
d  AV OUT  ( VIDEO OUT  and  AUDIO 
OUT L/R )
   
Audio and video output to analogue 
devices such as another T V or a recording 
device.
   
 
 
e  EXT 1  ( RGB  and  CVBS )
   
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
   
 
 
f  EXT 2  ( Y Pb Pr  and  AUDIO L /R )
   
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
   
 
 
g  HDMI 1 
   
 
 
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
 
 
 
Back connector for TV 26 
inch and larger
   
  
 
 
 
 
a  SERV. C 
   
For sof tware update.
   
 
 
b  AUDIO IN 
   
Audio input from devices that require 
a separate audio connection, such as a 
computer.
SERV.CSERV.C
   
 
 
 
 
 
 
 
7 Connect devices
 
 
This section describes how to connect 
various devices with different connectors and 
supplements examples provided in the Quick 
Star t.
  Note
 
Dif ferent types of connec tor s may be used to   •connec t a device to your T V, depending on 
availability and your needs.
   
 
 
Back connector for 19-22 
inch TV
   
  
 
 
 
 
a  SERV. C 
   
For sof tware update.
   
 
 
b  PC IN  ( VGA  and  AUDIO IN )
   
Audio and video input from a computer.
   
 
 
c  TV ANTENNA 
   
Signal input from an antenna, cable or 
satellite.
SERV.CSERV.C
English
EN
 
						

							22
   
 
 
c  HDMI  (For TV 26 inch and larger)
   
 
 
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
 
 
 
Connect a computer
 
 
 
Before you connect a computer to the TV 
   
 
 
Set the screen refresh rate on your  • 
computer to 60Hz.
   
 
 
Select a suppor ted screen resolution on  • 
your computer.
   
 
 
 
 
Connect a computer with one of the 
following connectors: 
 
Note
 
Connec tions via DVI or VGA require an additional   •audio cable.
 
 
 
 
  • HDMI cable 
 
 
 
 
 
 
 
  • DVI - HDMI cable 
 
 
  
DVI
LEFT / RIGHT
HDMI 1 / DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger For TV of size 19-22 inch
   
 
 
c  TV ANTENNA 
   
Signal input from an antenna, cable or 
satellite.
   
 
 
d  SPDIF OUT 
   
Digital audio output to home theatres 
and other digital audio systems.
   
 
 
e  EXT 1  ( RGB  and  CVBS )/ EXT 2  ( CVBS )
   
Analogue audio and video input from 
analogue or digital devices such as 
DVD players or game consoles. EX T 2 
suppor ts S-Video.
   
 
 
f  EXT 3  ( Y Pb Pr  and  AUDIO L /R )
   
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
   
 
 
g  HDMI 1 
   
 
 
Digital audio and video input from high-
defi nition digital devices such as Blu-ray 
players.
   
 
 
 
Side connector
 
 
  
 
 
 
 
a  AUDIO L/R 
   
Audio input from analogue devices 
connected to  VIDEO 
.
   
 
 
b  VIDEO 
   
Composite video input from analogue 
devices such as VCRs.
1
2
3
EN
 
						

							23
   
 
 
Enable or disable EasyLink
 
Note
 
Do not enable Philips EasyLink if you do not intend   •to use it.
 
 
 
 
1 Press  MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Preferences] 
 > 
  [EasyLink] 
.
 
 
 
 
3 Select  [On] 
 or  [Of f ] 
.
 
 
 
 
 
 
 
Use one-touch play
 
 
 
 
1  Af ter enabling EasyLink, press play on 
your device. 
   
 
 
The TV automatically switches to the    È
correct source.
   
 
 
 
 
 
 
 
Use one-touch standby
 
 
 
 
1  Press and hold   
 
Standby 
 on the T V ’s or 
device’s remote control for at least three 
seconds. 
   
 
 
The TV and all connected HDMI    È
devices switch to standby.
   
 
 
  • HDMI cable and HDMI-DVI adaptor 
 
 
  
 
 
 
 
  • VGA cable 
 
 
 
 
  
 
 
 
 
 
 
Use Philips EasyLink
 
 
Your TV suppor ts Philips EasyLink, which 
enables one-touch play and one-touch standby 
between EasyLink-compliant devices. 
  Note
 
Compliant devices must be connec ted to your T V   •via HDMI.
DVI
LEFT / RIGHT
HDMI 1 / DVIAUDIO IN : PC IN(AUDIO)For TV of size 26 inch and larger For TV of size 19-22 inch
VGA
VGA
PC IN(AUDIO)For TV of size 19-22 inch
English
EN
 
						

							24
   
 
 
 
 
 
 
 
 
Use a Kensington lock
 
 
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
   
 
  
EN
 
						

							25
   
 
 
 
 
 
 
Remote control
 
 
 
 
 
Ty p e :  P F 0 1E 0 9 B • 
   
 
 
Batteries: 2 x A A A (LR03 type) • 
 
 
 
 
 
 
 
 
Power
 
 
 
 
 
Mains power: 220 -240V, 50Hz • 
   
 
 
Standby power: < 0.3W • 
   
 
 
Ambient temperature: 5 to 40 degrees  • 
Celsius
   
 
 
 
 
 
 
Supported TV  mounts
 
 
To mount the TV, purchase a suitable VESA-
compatible TV mount and mounting bolts. For 
easy access to connectors, be sure to leave a 
clearance of at least 5.5 cm from the back of 
the TV.
  Warning
 
Follow all instruc tions provided with your T V   •mount. Koninklijke Philips Elec tronics N.V. bear s no 
responsibility for improper T V mounting that results 
in accident, injur y or damage.
   
TV screen 
size (inches)   
Required 
pitch (mm)   
Required 
mounting bolts
  19  100 x 100  4 x M4
  22  100 x 100  4 x M4
  26  100 x 200  6 x M4
  32  200 x 200  4 x M6
  42  200 x 200  4 x M6
 
 
 
 
 
 
 
8 Product 
information
   
Product information is subject to change without 
notice. For detailed product information, go to 
www.philips.com/suppor t.
   
 
 
Supported display resolutions
 
 
 
 
Computer formats 
   
 
 
Resolution - refresh rate: • 
   
 
 
640 x 480 - 60Hz • 
   
 
 
800 x 600 - 60Hz • 
   
 
 
1024 x 768 - 60Hz • 
   
 
 
1280 x 1024 - 60 Hz • 
   
 
 
1360 x 768 - 60Hz • 
   
 
 
1440 x 900 - 60Hz (For Full HD only) • 
   
 
 
1680 x 1050 - 60Hz (For Full HD only) • 
   
 
 
Via HDMI/DVI input • 
   
 
 
 
 
 
Video formats 
   
 
 
Resolution - refresh rate: • 
   
 
 
480i - 60Hz • 
   
 
 
480p - 60Hz • 
   
 
 
576i - 50Hz • 
   
 
 
576p - 50Hz • 
   
 
 
720p - 50Hz, 60Hz • 
   
 
 
1080i - 50Hz, 60Hz • 
   
 
 
1080p - 50Hz, 60Hz • 
   
 
 
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  • 
60Hz.
   
 
 
 
 
 
 
 
 
Tuner/Reception/Transmission
 
 
 
 
 
Antenna input: 75ohm coaxial (IEC75) • 
   
 
 
T V system: PAL I, B/G, D/K; SECAM B/G,  • 
D/K , L /L’ 
   
 
 
Video playback: NTSC , SECAM, PAL • 
   
 
 
Tuner Bands: Hyperband, S-channel, UHF,  • 
VHF
English
EN
 
						

							26
   
 
 
 
 
TV channel issues
 
 
 
Previously installed channels do not appear in 
the channel list:
   
Check that the correct channel list is    •
selected.
   
 
 
 
 
Picture issues
 
 
 
The TV is on, but there is no picture:
   
Check that the antenna is properly    •
connected to the T V.
   
Check that the correct device is selected    •
as the T V source.
   
 
 
There is sound but no picture:
   
Check that the picture settings are    •
correctly set.
   
 
 
There is poor TV reception from an antenna 
connection:
   
Check that the antenna is properly    •
connected to the T V.
   
Loudspeakers, unear thed audio devices,    •
neon lights, high buildings and other large 
objects can infl uence reception quality. 
If possible, tr y to improve the reception 
quality by changing the antenna direction 
or moving devices away from the T V.
   
If reception on only one channel is poor,    •
fi ne tune this channel.
   
 
 
There is poor picture quality from connected 
devices:
   
Check that the devices are connected    •
properly.
   
Check that the picture settings are    •
correctly set. 
   
 
 
The TV did not save your picture settings:
   
 
 
Check that the T V location is set to the  • 
home setting. This mode offers you the 
fl exibility to change and save settings.
   
 
 
 
 
The picture does not fi t the screen; it is too 
big or too small:
   
Tr y using a different picture format.   •
 
 
 
 
 
 
 
9 Troubleshooting
 
 
This section describes commonly encountered 
issues and accompanying solutions.
   
 
 
General TV  issues
 
 
 
The TV does not switch on:
   
Disconnect the power cable from the    •
power outlet. Wait for one minute then 
reconnect it.
   
Check that the power cable is securely    •
connected.
   
 
 
The remote control is not working properly:
   
Check that the remote control batteries    •
are correctly inser ted according to the 
+/- or ient ation.
   
Replace the remote control batteries if    •
they are fl at or weak.
   
Clean the remote control and T V sensor    •
lens.
   
 
 
The standby light on the TV blinks red:
   
Disconnect the power cable from the    •
power outlet. Wait until the T V cools 
down before reconnecting the power 
cable. If the blinking reoccurs, contact 
Philips Consumer Care. 
   
 
 
You forgot the code to unlock the TV lock 
feature
   
Enter ‘8888’.   •
   
 
 
The TV menu is in the wrong language
   
Change the T V menu to your preferred    •
language.
   
 
 
When turning the TV on/off/to standby, you 
hear a creaking sound from the TV chassis:
   
No action is required. The creaking sound    •
is normal expansion and contraction of 
the T V as it cools and warms up. This 
does not impact per formance.
EN
 
						

							27
   
 
 
 
 
Computer connection issues
 
 
 
The computer display on the TV is not stable:
   
Check that a suppor ted resolution and    •
refresh rate is selected on the computer.
   
Set the T V picture format to unscaled.   •
 
 
 
 
 
 
Contact us
 
 
 
If you cannot resolve your problem, refer to 
the FAQs for this T V at w w w.philips.com/
suppor t. 
   
If the problem remains unresolved, contact 
Philips Consumer Care in your countr y as 
listed in this User Manual.
  Warning
 
Do not at tempt to repair the T V your self. This may   •cause severe injur y, irrepar able damage to your T V 
or void your warr anty.
  Note
 
Make a note of your T V model and serial number   •before you contac t Philips. These number s are 
printed on the back of the T V and on the packaging.
   
 
 
The picture position is incorrect:
   
Picture signals from some devices may    •
not fi t the screen correctly. Check the 
signal output of the device.
   
 
 
 
 
Sound issues
 
 
 
There is a picture but no sound from the TV:
 
Note
 
If no audio signal is detec ted, the T V automatically   •switches the audio output of f — this does not 
indicate malfunction.
   
Check that all cables are properly    •
connected.
   
Check that the volume is not set to 0.   •
   
Check that the sound is not muted.   •
   
 
 
There is a picture but the sound quality is 
poor:
   
Check that the sound settings are    •
correctly set.
   
 
 
There is a picture but sound comes from one 
speaker only:
   
Verify that sound balance is set to the    •
centre.
   
 
 
 
 
HDMI connection issues
 
 
 
There are problems with HDMI devices:
   
Note that HDCP suppor t can delay the    •
time taken for a T V to display content 
from a HDMI device. 
   
If the T V does not recognise the HDMI    •
device and no picture is displayed, tr y 
switching the source from one device to 
another and back again.
   
If there are intermittent sound    •
disruptions, check that output settings 
from the HDMI device are correct.
   
If a HDMI-to-DVI adaptor or HDMI to    •
DVI cable is used, check that an additional 
audio cable is connected to  AUDIO L/R 
 
or  AUDIO IN 
 (mini - jack onl y).
English
EN
 
						

							28
   
EasyLink 
   
disable  23 
   
enable  23 
   
one-touch play   23 
   
one-touch standby   23 
   
Environmental care  5 
 
 
 
 
F
 
 
Factory settings  17 
   
Favourite list 
   
select  13  
   
set up   13  
 
 
 
 
H
 
 
HDMI cable 
   
troubleshooting  27 
   
Home mode  16 
 
 
 
 
I
 
 
Installation 
   
automatic  18 
   
manual  19 
 
 
 
 
K
 
 
Kensing ton lock  24 
 
 
 
 
L
 
 
Language 
   
troubleshooting  26 
   
Location  16 
   
Lock 
   
Kensing ton  24 
   
TV  15 
 
 
 
 
M
 
 
Menu 
   
child lock   15 
   
language  26 
   
main menu   10 
   
teletex t  13  
   
troubleshooting  26 
 
 
 
 
 
 
 
10 Index
 
 
 
A
 
 
Analogue channel 
   
fi ne tune   19 
 
 
 
 
B
 
 
Batteries  26 ,  5 
   
Bracket  25 
 
 
 
 
C
 
 
Channel list 
   
favourite  13  
   
troubleshooting  26 
   
update  14 
   
Channels 
   
favourite list   13  
   
install 
   
automatic  18 
   
manual  19 
   
rearrange  20 
   
rename  20 
   
tune  19 
   
Computer format 
   
technical specifi cations   25 
   
Connections 
   
HDMI 
   
troubleshooting  27 
   
mains cord   21 
   
technical specifi cations   25 
   
troubleshooting  27 
 
 
 
 
D
 
 
Demo  17 
   
Devices 
   
watch  9 
   
Digital services 
   
teletex t  13  
   
Display 
   
resolution  25 
 
 
 
 
E
EN