Philips 32pfl3404 User Manual

							9
   
 
 
Press   •  
 to mute the sound.
   
 
 
Press   • 
 
 again to restore the sound.
 
 
 
 
 
 
 
 
Use teletext
 
 
 
 
 
 
 
 
 
 
1 Press  MHEG/TELETEXT 
.
   
 
 
The main index page appears.   È
 
 
 
 
 
 
2  Select a page as follows:
   
 
 
Press the   • Numeric buttons 
 to enter 
a page number
   
 
 
Press   • P +/- 
 or  
 
  
 to view the nex t 
or previous page
   
 
 
Press the   • Colour buttons 
 to select a 
colour coded item
   
 
 
Press   • 
 
 
 BACK 
 to return to a 
previously viewed page
   
 
 
 
 
3 Press  MHEG/TELETEXT 
 to exit teletex t.
 
 
 
 
 
 
Watch connected devices
 
Note
 
Switch on the device before selec ting it as a source   •on the T V.
 
 
 
 
Use the source button
 
 
 
 
 
 
 
1 Press   
 
 SOURCE 
.
   
 
 
The source list appears.   È
 
 
 
 
 
 
2  Press the  Navigation buttons 
 to select a 
device.
   
 
 
3   
 
 
Press  OK 
 to watch the selected device.
The TV switches to the selected    È
device.
   
 
 
 
 
 
 
 
 
Adjust TV  volume
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To increase or decrease volume 
   
 
 
Press   • 
 
 
 +/- 
.
   
 
 
Press   • VOLUME +/- 
 on the side of the T V.
   
 
 
 
To mute or unmute sound 
English
EN
 
						

							10
   
 
 
 
 
Change picture and sound 
settings
   
Change picture and sound settings to suit your 
preferences. You can apply pre-defi ned settings 
or change settings manually.
   
 
 
Use smart picture
 
 
Use smar t picture to apply pre-defi ned 
picture settings.
   
 
 
1 Press   
 
 PICTURE 
.
   
 
 
The     È[Smart picture] 
 menu appears.
 
 
 
 
 
 
2 Press   
  
 to select one of the following 
smar t picture settings.
   
 
 
  • [Personal] 
Lists customised personal 
picture settings.
   
 
 
  • [Vivid] 
Maximises picture settings.
   
 
 
  • [Standard] 
Adjusts picture settings 
to suit most environments and types 
of video.
   
 
 
  • [MOVIE] 
Applies picture settings 
ideally suited for movie viewing.
   
 
 
  • [Game] 
Applies picture settings 
maximised for fast-moving games.
   
 
 
  • [Energy saving] 
Applies low-energy 
picture settings.
   
 
 
 
 
3 Press  OK 
 to confi rm your choice.
   
 
 
The selected smar t picture setting is    È
applied.
   
 
 
 
 
 
 
 
Manually adjust picture settings
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Press  OK 
 to select  [Picture] 
.
   
 
 
The     È[Picture] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
  
 to select one of the 
following picture settings.
   
 
 
 
 
  • [Smart picture] 
Accesses pre-defi ned 
smar t picture settings.
   
 
 
  • [Contrast] 
Adjusts the intensity of bright 
areas, keeping dark areas unchanged.
   
 
 
  • [Brightness] 
Adjusts the intensity and 
details of dark areas.
   
 
 
 
 
 
 
 
5  Use more of 
your TV
   
 
 
Access TV  menus
 
 
Menus help you to install channels, change 
picture and sound settings and access other 
features.
   
 
 
 
1 Press   
 
 MENU 
.
   
 
 
The menu screen appears.   È
 
 
 
 
 
 
 
 
 
2  Press the   
  
  
  
 to select and navigate 
through one of the following menus.
   
 
 
  • [Picture] 
Adjusts the picture setting 
for optimal viewing.
   
 
 
  • [Sound] 
Adjusts the sound setting.
   
 
 
  • [Features] 
Accesses different features 
like timer, T V lock and demo. 
   
 
 
  • [Installation] 
Selects channel 
installation menu, adjusts preferences 
and resets the T V to factor y settings.
   
 
 
 
 
3 Press  OK 
 to confi rm your choice.
 
Tip
 
Press    • 
 
 MENU 
 at any time to exit the menu.
   
Press    • 
 
 BACK 
 to move back one screen.
Smart picture
Contrast
Brightness
Colour
Hue
Sharpness
Noise reduction
TintPicture
Sound
Features
Installation
EN
 
						

							11
   
 
 
 
 
 
Change picture format
 
 
 
 
1 Press   
 
 FORMAT 
.
   
 
 
A picture format bar appears.   È
 
 
 
 
 
 
2 Press   
  
 to select a picture format.
   
 
 
The selected picture format is    È
activated.
   
 
 
 
 
3 Press  OK 
 to confi rm your choice.
 
 
 
 
 
Summary of picture formats
 
 
The following picture settings can be 
confi gured.
 
Note
 
Depending on the for mat of the pic ture source,   •some pic ture set tings are not available.
 
 
 
 
  • [Colour] 
Adjusts colour saturation.
   
 
 
  • [Hue] 
Compensates colour variations in 
NTSC encoded transmissions.
   
 
 
  • [Sharpness] 
Adjusts the level of sharpness 
in image details.
   
 
 
  • [Noise reduction] 
Filters and reduces 
noise in an image.
   
 
 
  • [Tint] 
Adjusts the colour balance in an 
image. 
   
 
 
  • [Custom tint] 
Make a customised tint 
setting.
   
 
 
  • [Dig.CrystalClear] 
Digitally adjusts picture 
quality to optimal contrast, colour and 
sharpness.
   
 
 
  • [Dynamic contrast] 
Automatically 
enhances contrast in an image. A 
  [Medium] 
 set ting is recommended.
   
 
 
  • [Dynamic backlight] 
Adjusts the 
brightness of the T V backlight to 
match lighting conditions.
   
 
 
  • [MPEG artifact re.] 
Smooths out 
transitions on digital pictures. You 
can switch this feature on or off.
   
 
 
  • [Colour enhancement] 
Makes 
colours more vivid and improves the 
resolution of details in bright colours. 
You can switch this feature on or off.
   
 
 
 
 
  • [PC mode] 
Adjusts the picture when a PC 
is connected to the T V via HDMI/DVI/
VGA .
   
 
 
  • [Picture format] 
Changes the picture 
format.
   
 
 
  • [Horizontal shift] 
Adjusts the picture 
horizontally for PC-VGA or YPbPr ( 
EXT2 or EXT3).
   
 
 
  • [Vertical shift] 
Adjusts the picture 
ver tically for PC-VGA or YPbPr ( EX T2 
or EXT3).
English
EN
 
						

							12
   
 
 
 
Use smart sound
 
 
Use smar t sound to apply pre-defi ned sound 
settings.
   
 
 
1 Press   
 
 SOUND 
.
   
 
 
The     È[Smart sound] 
 menu appears.
 
 
 
 
 
 
2 Press   
  
 to select one of the following 
smar t sound settings.
   
 
 
  • [Standard] 
Adjusts sound settings to 
suit most environments and types of 
audio.
   
 
 
  • [NEWS] 
Applies sound settings 
ideally suited for spoken audio, such 
as the news.
   
 
 
  • [MOVIE] 
Applies sound settings 
ideally suited for movies.
   
 
 
  • [Personal] 
Applies the settings that 
were customised in the sound menu.
   
 
 
 
 
3 Press  OK 
 to confi rm your choice.
   
 
 
The selected smar t sound setting is    È
applied.
   
 
 
 
 
 
 
 
Adjust sound settings
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Press   
  
 to select  [Sound] 
.
   
 
 
The     È[Sound] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
  
  
 to select one of the 
following sound settings.
   
 
 
  • [Smart sound] 
Accesses pre-defi ned 
smar t sound settings.
   
 
 
  • [Bass] 
Adjusts the bass level.
   
 
 
  • [Treble] 
Adjusts the treble level.
   
 
 
  • [Volume] 
Adjusts the volume.
   
 
 
  • [Balance] 
Adjusts the balance of the 
right and lef t speakers to best suit 
your listening position.
   
 
 
  • [Dual I-II] 
Selects between audio 
languages if dual sound is broadcast.
   
 
 
  • [Mono/Stereo] 
Selects between 
mono or stereo if stereo is 
broadcast.
   
 
 
  • [Surround] 
Enables spatial sound.
   
 
 
  • [Auto volume] 
Automatically 
reduces sudden volume changes, for 
   
 
 
[Auto format] 
(Not for 
PC mode.) Enlarges the 
picture automatically to 
best fi t the screen. The 
subtitles remain visible.
   
 
 
[Super zoom] 
(Not for HD 
and PC mode.) Removes 
the black bars on the side 
of 4:3 broadcasts. There is 
minimal distor tion.
   
 
 
[4:3] 
Shows the classic 4:3 
format.
   
 
 
[Subtitle zoom] 
Displays 
4:3 pictures over the full 
area of the screen, with 
sub-titles visible. Par t of 
the top of the picture is 
clipped off.
   
 
 
[Movie exp.14:9] 
(Not for 
HD and PC mode.) Scales 
4:3 format to 14:9.
   
 
 
[Movie exp.16:9] 
(Not for 
HD and PC mode.) Scales 
4:3 format to 16:9.
   
 
 
[Wide screen] 
Stretches 
the classic 4:3 format to 
16 : 9.
   
 
 
[Unscaled] 
For HD and PC 
mode only, and in selected 
models only. Allows 
maximum sharpness. 
Some distor tion may 
be present due to the 
broadcaster’s systems. 
Set your PC resolution to 
wide screen mode for best 
results.
EN
 
						

							13
   
 
 
The subpage appears.   È
 
 
 
 
 
 
4 Press   
  
 to switch between subpages.
 
 
 
 
 
 
 
Select T.O.P. teletext broadcasts
 
 
Table Of Pages ( T.O.P.) teletex t broadcasts 
allow you to jump from one subject to 
another without using page numbers. T.O.P. 
teletex t is not broadcast on all T V channels.
   
 
 
1 Press  MHEG/TELETEXT 
.
   
 
 
The teletext screen appears.   È
 
 
 
 
 
 
2 Press   
 
 INFO 
.
   
 
 
The T.O.P. over view appears.   È
 
 
 
 
 
 
3 Press   
  
  
  
 to select a subject.
 
 
 
 
4 Press  OK 
 to view the page.
 
 
 
 
 
 
 
 
Create and use lists of 
favourite channels
   
You can create lists of your preferred TV 
channels and radio stations so that you can fi nd 
those channels easily.
  Tip
 
You can create and store up to four favourite lists   •on your T V.
 
 
 
 
 
Select a favourite list
 
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid.
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
3 Press  OK 
 to select  [Show favourite ch.] 
.
   
 
 
The favourite lists appear.   È
 
 
 
 
 
 
4 Press   
  
 to select a favourite list.
 
 
 
 
5 Press  OK 
. 
   
 
 
Only channels in the favourite list    È
appear in the channel grid.
example, when switching channels. 
When enabled, this produces a more 
consistent audio volume.
   
 
 
  • [Delta volume] 
Levels out volume 
differences between channels or 
connected devices. Switch to the 
connected device before you change 
the delta volume.
   
 
 
 
 
 
 
 
 
Use advanced teletext 
features
   
 
 
Access the teletext options menu
 
 
Most of the advanced teletex t features are 
accessed via the teletex t options menu.
   
 
 
1 Press  MHEG/TELETEXT 
.
   
 
 
The teletext screen appears.   È
 
 
 
 
 
 
2 Press  OPTIONS 
.
   
 
 
The teletext options menu appears.   È
 
 
 
 
 
 
3 Press   
  
 to select one of the following 
options.
   
 
 
  • [Reveal] 
Hides or reveals hidden 
information on a page, such as 
solutions to riddles or puzzles.
   
 
 
  • [Cycle subpage] 
Cycles through 
subpages automatically if subpages 
are available.
   
 
 
  • [Language] 
Switches to a different 
language group to display a language 
correctly when that language uses a 
different character set.
   
 
 
  • [Freeze page] 
Freezes the current 
page.
   
 
 
 
 
4 Press  OK 
 to confi rm your choice and exit 
the teletex t options menu.
   
 
 
 
 
 
Select teletext subpages
 
 
A teletex t page can hold several subpages. 
Subpages are displayed on a bar nex t to the 
main page number.
   
 
 
1 Press  MHEG/TELETEXT 
 .
   
 
 
The teletext screen appears.   È
 
 
 
 
 
 
2  Select a teletex t page with subpages.
 
 
 
 
3 Press   
 to enter a subpage.
English
EN
 
						

							14
   
 
 
 
 
 
 
 
Remove a channel from a favourite 
list
  Note
 
Selec t the favourite list to edit, before removing a   • 
channel .
 
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid.
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
3 Press  OK 
 to enter  [Show favourite ch.] 
.
 
 
 
 
4 Press   
  
 to select a favourite list and 
press  OK 
 to confi rm the choice.
 
 
 
 
5 Press   
  
  
  
 to choose the channel that 
you wish to remove from the list.
   
 
 
6 Press   
 
 OPTIONS 
.
 
 
 
 
7 Press   
  
 to select  [Unmark as fav.] 
.
 
 
 
 
8 Press  OK 
.
   
 
 
The channel is removed from the    È
favourite list.
   
 
 
 
 
9 Press   
 
 MENU 
 to exit the channel 
options menu. 
   
 
 
The updated channel grid appears,    È
displaying the current channels in the 
favourite list.
   
 
 
 
 
 
 
 
 
Use timers
 
 
You can set timers to switch the TV on or 
switch to standby at a specifi ed time.
 
 
 
 
Automatically switch the TV to 
standby (sleeptimer)
   
Sleeptimer switches the T V to standby af ter a 
pre-defi ned period of time.
 
Tip
 
You can always switch of f your T V earlier or reset   •the sleeptimer during the countdown.
 
 
 
 
 
 
 
 
 
View all channels
 
 
You can exit a favourite list, and view all 
installed channels.
   
 
 
1  When watching T V, press  OK 
 to display 
the channel grid.
   
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
3 Select  [Show favourite ch.] 
 >  [All] 
 .
 
 
 
 
4 Press  OK 
. 
   
 
 
All channels display in the channel grid.   È
 
Note
 
All favourite channels are mar ked by an asterisk in   •the channel grid.
 
 
 
 
 
Add a channel to a favourite list
 
Tip
 
View all channels before adding a channel to a   •favourite list.
 
 
 
 
1  When watching T V, switch to the channel 
you want to add to a favourite  list  
 (s e e 
‘Switch channels’ on page   
8  
) .
 
 
 
 
2 Press   
 
 OPTIONS 
.
   
 
 
The channel options menu appears.   È
 
 
 
 
 
 
3 Press   
  
 to select  [Mark as favourite] 
.
 
 
 
 
4 Press  OK 
.
   
 
 
The favourite lists appear.   È
 
 
 
 
 
 
5 Press   
  
 to select a favourite list to add 
the channel to.
   
 
 
6 Press  OK 
.
   
 
 
The channel is added to the favourite    È
list.
EN
 
						

							15
   
 
 
 
 
Use child control and rating 
locks
   
You can prevent your children from watching 
cer tain programmes or cer tain channels by 
locking the TV controls and by using ratings. 
   
 
 
Set or change the TV lock code
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Press   
  
  
  
 to select  [Features] 
 >  [Set 
code] 
.
 
 
 
 
3 Press   
 to enter the code setup.
 
 
 
 
4  Enter your code using the  Numeric 
buttons 
.
 
 
 
 
5  Re-enter the same code in the new 
dialogue box for confi rmation.
   
 
 
If the code is set successfully, the    È
dialogue box will disappear. However, if 
the code cannot be set, a new dialogue 
box will prompt you to re-enter the 
code.
   
 
 
 
 
6  If you want to change the code, select 
  [Features] 
 >  [Change code] 
.
 
 
 
 
7  Enter your current code using the 
  Numeric buttons 
. 
   
 
 
If the code is validated, a new dialogue    È
box will prompt you to enter your 
new code.
   
 
 
 
 
8  Enter the new code using the  Numeric 
buttons 
.
   
 
 
A message appears prompting you    È
to enter the new code again for 
confi rmation.
 
Tip
 
If you forget your code, enter ‘8888’ to override any   •existing codes.
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Features] 
 >  [Sleeptimer] 
 .
   
 
 
The     È[Sleeptimer] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
 to set the sleep time. 
   
 
 
The sleeptimer can be up to 180    È
minutes in steps of fi ve minutes. If 
set to zero minutes, the sleeptimer is 
switched off.
   
 
 
 
 
4 Press  OK 
 to activate the sleeptimer.
   
 
 
The TV switches to standby after the    È
pre-defi ned period of time.
 
 
 
 
 
 
 
 
 
Automatically switch the TV on (on 
timer)
   
You can switch the T V to a specifi ed channel 
at a specifi ed time, from standby.
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Features] 
 >  [On timer] 
 .
 
 
 
 
3 Press   
 to enter the  [On timer] 
 menu.
 
 
 
 
4 Press   
  
  
  
 to select  [Activate] 
 and set 
a day of the week or frequency.
   
 
 
5 Press  OK 
 to confi rm.
 
 
 
 
6 Press   
  
  
  
 to select  [Time] 
 and set the 
star ting time.
   
 
 
7 Press  [Done] 
 to confi rm.
 
 
 
 
8 Press   
  
  
  
 to select  [Programme no.] 
 
and set the channel.
   
 
 
9 Press  OK 
 to confi rm.
 
 
 
 
10 Press   
 
 MENU 
 to exit.
 
Tip
 
Select    •[On timer] 
 >  [Activate] 
 >  [Off ] 
 to disable 
  [On timer] 
. 
   
When  
  •[On timer] 
 is  [Off ] 
, only  [Activate] 
 can be 
selected. 
   
Set the T V clock before ac tivating  
  •[On timer] 
 
feature  
 
(see ‘ Set the T V clock ’ on page   
16  
) .
English
EN
 
						

							16
   
 
 
 
 
3 Press   
  
  
  
 or  Numeric buttons 
 to 
enter time.
   
 
 
4 Press  [Done] 
 to confi rm.
 
 
 
 
5 Press   
 
 MENU 
 to exit.
 
 
 
 
 
 
 
 
Change TV  preferences
 
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Preferences] 
 .
 
 
 
 
3 Press   
 to enter  [Preferences] 
.
   
 
 
  • [Location] 
Optimises T V settings for 
your location - home or shop.
   
 
 
  • [Volume bar] 
Displays the volume 
bar when adjusting the volume.
   
 
 
  • [EasyLink] 
Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
   
 
 
  • [Colour] 
 Sets the colour television 
standard used in your area.
   
 
 
  • [E-sticker] 
For shop mode only. Sets 
the location of the e-sticker.
   
 
 
 
 
4 Press   
  
  
  
 to select your preference.
 
 
 
 
5 Press  OK 
.
 
 
 
 
6 Press   
 
 MENU 
 to exit.
 
 
 
 
 
 
 
 
Access decoder channel
 
 
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT1 or EXT2. 
   
 
 
Set decoder channel
 
 
Map channels from a decoder or descrambler
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Decoder] 
 .
 
 
 
 
3 Press   
 to enter  [Decoder] 
.
 
 
 
 
4 Press   
 to enter  [Channel] 
.
 
 
 
 
 
Lock or unlock all channels and 
connected devices
   
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Press   
  
  
  
 to select  [Features] 
 >  [TV 
lock] 
.
 
 
 
 
3 Press   
 to enter the  [TV lock] 
.
   
 
 
A screen appears prompting you to    È
enter a code.
   
 
 
 
 
4  Enter your code using  Numeric buttons 
.
 
 
 
 
5 Press   
  
 to select  [Lock] 
 or  [Unlock] 
.
 
 
 
 
6 Press  OK 
.
   
 
 
All channels and connected devices are    È
locked or unlocked.
   
 
 
 
 
7 Press   
 
 MENU 
 to exit.
 
Note
 
If you selec t    •[Lock] 
, you have to enter your code 
ever y time you turn on your T V.
   
 
 
 
Lock or unlock one or more channels
 
 
 
 
1  When watching T V, press  OK 
 to display 
the channel grid.
   
 
 
2 Press   
  
  
  
 to select a channel to lock 
or unlock.
   
 
 
3 Press   
 
 OPTIONS 
.
 
 
 
 
4 Press   
  
 to select  [Lock/Unlock chan.] 
.
 
 
 
 
5  For each selection, press  OK 
 to lock or 
unlock the channel.
   
 
 
 
 
 
 
Use the TV clock
 
 
You can display a clock on the TV screen.
 
 
 
 
Set the TV clock
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Features] 
 >  [Clock] 
   
 
 
The     È[Clock] 
 menu appears.
EN
 
						

							17
   
 
 
 
 
 
 
Reset the TV to factory 
settings
   
You can restore the default picture and sound 
settings of your TV. Channel installation settings 
remain the same.
   
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Factory settings] 
 .
 
 
 
 
3 Press   
 to enter the  [Factory settings] 
 
menu.
   
 
 
    È[Reset] 
 is highlighted.
 
 
 
 
 
 
4 Press  OK 
 to reset to factor y settings.
 
 
 
 
5 Press   
 
 MENU 
 to exit.
 
 
 
 
5 Press   
  
 to select channel number to 
map to the decoder/descrambler channel.
   
 
 
6 Press  OK 
.
 
 
 
 
7 Press   
  
  
  
 to select and enter  [Status] 
.
 
 
 
 
8 Press   
  
 to select the connector used by 
the decoder/descrambler ( [None] 
,  [EXT 
1] 
 or  [EXT 2] 
 .
 
 
 
 
9 Press  OK 
.
 
 
 
 
10 Press   
 
 MENU 
 to exit.
 
Note
 
Select    •[None] 
 if you do not want to map to the 
decoder/descrambler channel.
   
 
  •[EXT 2] 
 is available only in T Vs of 26 inches and 
larger.
   
 
 
 
 
Start a TV demo
 
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Features] 
 >  [Demo] 
 .
   
 
 
The     È[Demo] 
 menu appears.
 
 
 
 
 
 
3 Press   
  
 to select a demo.
   
 
 
  • [Dig.CrystalClear] 
Displays two 
pictures side by side on the screen 
- a normal picture and a picture 
enhanced by this feature.
   
 
 
  • [Active Control] 
Automatically 
adjusts the picture setting for optimal 
picture quality continuously under 
any signal conditions.
   
 
 
 
 
4 Press  OK 
 to star t the demo.
 
 
 
 
5 Press   
 
 MENU 
 to exit.
English
EN
 
						

							18
   
 
 
 
 
 
Step 2 Install Channels
 
 
Select your countr y for proper channel 
installation. 
   
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Channel inst all.] 
 
>  [Channel assist ant] 
.
 
 
  
 
 
 
 
3 Press   
  
 to select your countr y.
 
 
  
 
 
 
 
4 Press   
 to nex t step.
 
 
 
 
5 Select  [Start] 
 and press  OK 
 to re-install 
channels. 
   
  
 
 
 
 
As the system searches for channels,    È
you have the option to  [Stop] 
 the 
process.
   
 
 
 
 
6  If you want to stop searching, select 
  [Stop] 
 and press  OK 
.
   
 
 
A dialogue box appears asking    È
you if you really want to  [Stop] 
 or 
  [Continue] 
 with the process.
 
 
 
 
 
 
7 Press   
  
 to select  [Stop] 
 or  [Continue] 
.
Menu language
Channel install.
Preferences
Decoder
Factory settings
Current softwareChannel assistant
Analogue: ManualPicture
Sound
Features
Installation
Select countryAustria
Belgium
Croatia
Czech Republic
Denmark
Finland
France
Germany
Start automatic installation. This takes a few minutes.
Start?
   
 
 
 
 
 
 
 
6 Install channels
 
 
The fi rst time you setup your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
reinstall and fi ne tune channels.
 
 
 
 
Automatically install channels
 
 
This section describes how to search and store 
channels automatically.
   
 
 
Step 1 Select your menu language
 
Note
 
Skip this step if your language set tings are correc t.  •
 
 
 
 
1 Press   
 
 MENU 
.
 
 
 
 
2 Select  [Installation] 
 >  [Menu language] 
 .
 
 
 
 
3 Press   
 to enter  [Menu language] 
.
 
 
 
 
4 Press   
  
 to select a language setting.
 
 
 
 
 
 
 
5 Press  OK 
 to confi rm.
 
 
 
 
6 Press   
 
 MENU 
 to exit.
Menu language
Channel install.
Preferences
Decoder
Factory settings
Current softwareБългарски
Dansk
Deutsch
Español
Français English
ČeskyPicture
Sound
Features
Installation
Ελληνικά
EN