Philips 32pf9730 User Manual

							21
Most TV channels broadcast information via teletext. This TV has a 1200 pages
memory that will store most broadcasted pages and subpages to reduce
waiting time. After each programme change, the memory is refreshed.
Switch Teletext on and off
Press bto switch the teletext on.
Select a Teletext page
- Enter the desired page number with the digit keys or with the 
-P+key.
- Select the options at the bottom of the screen with the colour keys.
Previously selected teletext page  
Press the 0key.
Select the index teletext page
Press the grey colour key kto display the main index (usually p.100).
Only for T.O.P teletext broadcasts:
Press i. A T.O.P. overview of the teletext subjects available is displayed.
Select with the cursor up/down, left/right the desired subject and press the
OKkey.
Not all TV channels broadcast T.O.P. teletext.
Select subpages
When a selected teletext page consists of different subpages, a list of
available subpages appears on the screen.
Press the cursor left or right to select the next or previous subpage.
Picture/Teletext 
&Press the bkey. Press the bkey to show Teletext on the right of the
screen.
éPress the bkey to return to a full teletext picture.
“Press the bkey to return to a full screen picture.
Enlarge a Teletext page
Press qrepeatedly to display the upper teletext part, the lower teletext
part and then to return to the normal teletext page size. When the teletext
page is enlarged, you can scroll the text, line by line using the cursor
up/down.
Hold
Press the ‡key to stop the pagecounter from seeking when you have
entered a wrong pagenumber or when the page is not available.
Enter another page number.
Hypertext
With hypertext you can quickly jump to a pagenumber or search for a
specific word shown on the current teletext page.
&Press the OKkey to highlight the first word or a number on the page.
éUse the cursor up/down, left/right to select any other word or number you
want to search for.
“Press the OKkey to confirm. The search starts.
A message appears at the bottom of the screen to indicate the searching,
or that the word or page is not found.
‘Use the cursor up to exit hypertext.
LIONS RECORD ANOTHER WIN 430
Index 100 News 300
BBC Info 110 Headlines 305
Children 120 Weather 400
Cookery 150 Sports 415
Education 200 Radio 500
Lottery 230 Travel 550
Finance 240 Subtitling 888
Music 280 TV Listings 600
102              p03  04  05  06  07  08 09  10  11  12  πBBC CEEFAX   102  Mon 05 Feb  16.35.22
BBC CEEFAX
✓
MODEON/OFFAmbilight
+
-+
-
DVD/R TV VCR AUX
MENU
123
456
789
0
Ò
®‡
π º †
®
®®
®
VIEW-  FAVORITES  -
SELECTDEMO
=
SAT
BROWSEb
q
i
0
MOT
B
vkT
b
¬
PV
OK
.@ TUV PQRS WXYZJKL GHI MNOABC
_-DEF
Teletext 
 
						

							22
Camera, Camcorder, Game
&Connect your camera, camcorder or game as shown.
éConnect to VIDEO2and AUDIO L3for mono equipment.
For stereo equipment also connect AUDIO R3.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-
VHS cables with the 
S-VIDEOinput 1and AUDIOinputs 3.
Do not connect cable 1and 2at the same time. This may cause picture
distortion !
Headphone
&Insert the plug into the headphone socket Las shown.
éPress ¬on the remote control to switch off the internal loudspeakers of
the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone
socket has a 3.5 mm jack.
In the Sound menu select 
Headphone volumeto adjust the headphone
volume.
1
2
3
Equipment to connect to the side connections
Teletext menu
The Teletext menu offers various functions to control teletext.
&Switch teletext on and press the MENUkey to activate the menu.
éPress the cursor up/down to select the menu items.
“Press the cursor right or the OKkey to activate.
‘Press the MENUkey to leave the teletext menu.
Reveal
Reveals/conceals hidden information on a page, such as solutions to riddles and
puzzles.
Cycle subpages (if subpages are available)
Makes the subpages cycle automatically.
Press the cursor right or the 
OKkey to activate and to deactivate again.
Language
If the displayed characters on screen do not correspond with the characters
used by the teletext broadcaster, you can change the language group here.
Select 
Group 1or Group 2with the cursor right.
Teletext menu
Reveal Off
Cycle subpages Off
Language Group II
 
						

							23
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
EXT1can handle CVBS, RGB and Audio L/R;EXT2CVBS, S-VIDEO, RGB and Audio L/R;EXT3CVBS and Audio L/R;EXT4YPbPr ;DVI(analogue and digital) and HDMI(digital);SideS-VIDEO or CVBS and Audio L/R.
It is preferable to connect peripherals with RGB output to 
EXT1or EXT2as RGB provides a better picture quality.
Note: If your recorder is provided with the EasyLink function, it should be connected to 
EXT2to benefit from the EasyLink functionality.
AUDIOOUTL
REXT 3 EXT 2 EXT 1 DVI HDMINETWORK
EXT 4 DIGITAL AUDIO
ANTENNA
AUDIOL
R
Pr Pb YIN1 IN2 OUT75
AUDIOOUTL
REXT 3 EXT 2 EXT 1 DVI HDMINETWORK
EXT 4 DIGITAL AUDIO ANTENNA
AUDIOL
R
Pr Pb YIN1 IN2 OUT75
Connect Peripheral Equipment
 
						

							24
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum
distance of 0,5 m from the screen.
Connect the aerial cables 1,2and, to obtain the optimum picture quality, eurocable 3as shown.
If your recorder does not have a euroconnector, the only possible connection is via the aerial cable. You will therefore need to tune in
your recorder’s test signal and store the test signal under a programme number between 90 and 99, see Manual installation, p. 8.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4to your decoder and to the special euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 13. You can also connect your decoder directly to 
EXT1or 2with a eurocable.
NETWORK HDMI DVIIN1 IN2DIGITAL AUDIOOUTLPb PrY
RLREXT 4EXT 1 EXT 2EXT 3
AUDIO
OUT AUDIO
EXTERNAL
RECORDERDECODER
4
123
CABLE
1/2
Recorder (VCR-DV D+RW)
 
						

							25
NETWORK HDMI DVIIN1 IN2DIGITAL AUDIO AUDIOOUTLPb PrY
RLREXT 4EXT 1 EXT 2 EXT 3OUT
AUDIO
CABLE
1
2
RECORDER
4
35
EXTERNAL 1/2/3
&Connect the aerial cables 1,2and 3as shown (only if your peripheral has TV aerial in-/output).
Connect your recorder to EXTERNAL 2with a eurocable 5.
Connect the other equipment with a eurocable 4to one of the euroconnectors EXTERNAL 1or EXTERNAL 3to obtain a
better picture quality.
If your recorder does not have a euroconnector, the only possible connection is via the aerial cable. You will therefore need to tune
in your recorder’s test signal and store the test signal under a programme number between 90 and 99, see Manual installation, p. 8.
See the handbook of your recorder.
éMake a selection in the Setup, Source menu, p. 13.
Recorder and other equipment  
 
						

							26
&Connect the three separate component video cables 1to the peripheral equipment having component video outputs (YPbPr), such
as DVD-players, laser-disc players, videogame players, satellite receivers or other equipment, and to the Y,Pband Prjacks of EXT4on the TV.
Note:EXT4should always be used together with digital audio.
éConnect the audio cable 2 to the DIGITAL AUDIO  OUTof the peripheral equipment and to one of the DIGITAL AUDIO  INconnectors of the TV.
Notes 
- If necessar y, you can adjust the picture position to the centre of the screen with the cursor keys.
- The labels for the component video sockets may differ depending on the DVD player or the peripheral equipment connected. Although the
abbreviations may var y, the letters B and R stand for the blue and red component signals, respectively, and  Y indicates the luminance signal. Refer
to the DVD player’s or peripheral equipment instructions for use for definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries
Association standard EIA770.3.
Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the
television to properly display.
Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the
connections are done in the correct way or move your digital equipment further away from your TV.
LREXT 1 EXT 2 EXT 3 OUTAUDIO
ANTENNA75DVI HDMILRNETWORK
DIGITAL AUDIO
IN2 IN1
PrPb Y
OUTAUDIO
DIGITAL EXT 4
YPbPrIN 1/2 AUDIO
....
....
12
Equipment with Component Video Output Connectors (YPbPr) 
DVD Player or other peripheral digital source equipment
 
						

							27
• Digital MultiChannel Surround receiver
Connect a digital MultiChannel Surround receiver to the 
DIGITAL AUDIO  OUTconnector at the bottom of the TV.
• Analogue MultiChannel Surround receiver
Connect an analogue MultiChannel Surround receiver to the 
AUDIO OUT L and Rconnectors at the bottom of the TV.
The volume has to be controlled via the MultiChannel Surround receiver.
Note: No sound will be heard when a TV channel or external source is locked via the Features/Child lock menu (see p. 17).
NETWORK DVIIN1 IN2OUTLPb PrYRLREXT 1 EXT 4 EXT 2 EXT 3HDMI
DIGITAL AUDIOAUDIO
OUT AUDIO
ANTENNA75
DIGITAL 
AUDIO
OUT
MultiChannel Surround receiver
NETWORK DVIIN1 IN2OUTLPb PrYRL
R
EXT 1 EXT 4 EXT 2 EXT 3HDMI ANTENNA75DIGITAL AUDIO AUDIOOUT AUDIO
AUDIO OUT
 
						

							28
Pb PrLREXT 1
EXT 4EXT 2 EXT 3 CL OutHDMI
ANTENNA75DVIIN1 IN2
OUTHDMIDIGITAL AUDIO
HDMI
LR
YNETWORK
Equipment to connect to a HDMI (High Definition Multimedia Interface) connector
HDMI is the leading new standard for Digital video and audio interconnection.
To the HDMIconnector you can connect HDMI peripheral equipments such as compatible DVD-R or DVD player with HDMI.
So you can display high-definition pictures on this TV in the digital form.
&Connect your HDMI equipment with the HDMIconnector.
éSelect the connected digital peripheral equipment in the Setup, Source menu, p. 13.
The 
HDMI INconnector allows the following TV and monitor display modes:
HDStandard Definition TV (SDTV) 640x480i
720x480i
720x576i
Enhanced Definition TV (EDTV) 640x480p
720x480p
720x576p
High Definition TV (HDTV) 1920x1080i
1280x720p
PCVGA 640x480
SVGA 800x600
XGA        1024x768
Notes:
- If necessar y, you can adjust the picture position to the centre of the screen with the cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the 
HDMI
input, the Digital audio output signal is muted.
- Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a system for protecting DVD content outputted via DVI from being
copied. It provides a secure digital link between a video source (DVD, PC, etc.) and your TV. Content is encr ypted at the source peripheral
equipment to prevent unauthorised copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length to max. 5 m.
- Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the
television to properly display.
- In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then on again.
To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards: 1920x1080i, 1280x720p, 720x576i,
720x576p, 720x480i, 720x480p.
 
						

							29
NETWORKDVIOUTPbY PrEXT 1 EXT 4 EXT 2 EXT 3HDMI ANTENNA75L
RIN2IN1
....
....
DVI AUDIO
123
DIGITAL AUDIO
DVI
VGA
4
Equipment to connect to a DVI connector
The DV Iconnector allows the following TV and monitor display modes, via thevkey on the remote control, for High Definition (HD) and computer (PC)
equipment:
HD
Standard Definition TV (SDTV) 640x480i
720x480i
720x576i
Enhanced Definition TV (EDTV) 640x480p
720x480p
720x576p
High Definition TV (HDTV) 1920x1080i
1280x720p
PCVGA 640x480
SVGA 800x600
XGA 1024x768
Note: If necessar y, you can adjust the picture position to the centre of the screen
with the cursor keys.
&Connect your equipment to the DV Iconnector of your TV 1.
According to the type of connector of your equipment, you may have to
use an appropriate adapter.
DV DConnect the DVI to DVI cable to the DV Iconnector of your TV 1.
Computer (PC):- with a DVI connector: connect the DVI to DVI cable to the DV Iconnector of your TV 1.
- with a VGA connector: connect the VGA cable to a VGA to DVI adapter
4 and connect to the 
DV Iconnector of your TV 1.
éConnect the audio cable 2to the DVI AUDIO R(right) and L(left)
inputs of the TV when the TV expects analogue audio for a connected
peripheral equipment to come from an analogue audio input
ORConnect the audio cable 3to one of the DIGITAL AUDIO  INconnectors of the TV when the TV expects digital audio for a connected
peripheral equipment to come from a digital audio input.
Then also make your selection of the source to which the peripheral
equipment with digital audio input has been connected in the Setup, Source
menu. See Digital audio, p. 13.
Personal computer to the home network connector
Your TV is equipped with the possibility to connect to your computer of
home network.
See the supplied separate Connected Planet guide for further explanation of
this functionality.
INTERNET
EXT 1NETWORKEXT 4 DIGITAL AUDIOPr Pb YIN1 IN2 OUT
 
						

							30
• Record a TV programme with your recorder without EasyLink
You can record a TV programme using your recorders tuner without
affecting your TV.
&Select the channel number on your recorder.
éSet your recorder to record.
See the handbook for your recorder.
Switching channel numbers on your TV does not disturb recording !
• Record a TV programme with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme
which is being displayed on the TV screen.
Continue to press the ®key on the remote control for more than 2
seconds.
Notes:
- Switching programme numbers on your TV does not disturb recording.
- When recording a programme from a peripheral connected to 
EXT1,EXT3,EXT4or Side, you can not select another TV programme on the screen without
disturbing the recording.
- If your EasyLink recorder has the system standby function, when you press the
Bkey for 3 seconds, both the TV and the recorder are switched to standby.
- If you have connected an S-VHS recorder provided with the EasyLink function,
you can record S-VHS quality from an S-VHS peripheral connected to the left
side of the TV. (E.g. from an S-VHS camcorder.)
&Press the vkey and then press this key repeatedly or select Sourcein
the Settings menu (see p. 13) to select EXT1,EXT2,EXT3,EXT4,DV I,HDMI,Sideor TV, according to where you connected your peripheral
equipments.
éPress the cursor up/down.
“Press OK.DVD/R TV VCR AUX
®
®
®
SELECTDEMO
SAT
BROWSEb
MOT
B
vkT
OK
=
✓
MODEON/OFFAmbilight
789
0
Ò
®‡
π º †
-  FAVORITES  -VIEWq
i
0.@ TUV PQRS WXYZ
To select connected equipment
Record with your recorder