Philips 32pf9730 User Manual

							1
Contents
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
First time installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Keys at the top of the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Use of the remote control RC4310 . . . . . . . . . . . . . . . . . . . . . . . .  4
Browse screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
How to navigate through the Settings menus  . . . . . . . . . . . . . . . . . . . .  7
Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Installation
Select the menu language and country  . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Store TV channels  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Software upgrade  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Setup menu
Preferences  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
Source  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Decoder  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
TV menu
Picture menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Features menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Ambilight menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
Multimedia Browser 
Viewing content from a Memory card / USB device  . . . . . . . . . . . . . .  19
Multimedia Browser menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
Teletext  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Teletext menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22
Equipment to connect to the side connections . . . . . . . . . . . . . .  22
Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . .  23
Recorder (vcr-dvd+rw) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Recorder and other equipment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25  
DVD Player or other peripheral digital source equipment . . . . . . . . . . 26
MultiChannel Surround receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
Devices to connect to a HDMI connector  . . . . . . . . . . . . . . . . . . . . .  28
Devices to connect to a DVI connector  . . . . . . . . . . . . . . . . . . . . . . .  29
Record with your recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30
To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . .  30
Audio- and video equipment keys . . . . . . . . . . . . . . . . . . . . . . . .  31
Setting the remote control to work peripheral equipment
Code setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
To cancel the selected mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
Learnable remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  36
Annex 1 - Philips TV software upgrade with portable memory . 38
Annex 2 - Philips TV Slideshow Format with background music . 40
Annex 3 - Philips TV  - Portable Memory and USB . . . . . . . . . . .  42
REnd of life directives
Philips is paying a lot of attention to
producing environmentally-friendly in green
focal areas. Your new TV contains materials
which can be recycled and reused. At the
end of its life specialised companies can
dismantle the discarded TV to concentrate
the reusable materials and to minimise the
amount of materials to be disposed of.
Please ensure you dispose of your old TV
according to local regulations.
Help?
If this instruction manual does
not give an answer or if ‘Tips’
does not solve your TV problem,
you can call your Local Philips Customer
or Ser vice Centre. See the supplied
World-wide guarantee booklet.
Please, have the Model and Product
number which you can find at the back
of your television set or on the packaging,
ready, before calling the Philips helpline.
Model: 32PF9730/10
Product No: ...........................................
Care of the screen
See p. 37.
English
EasyLink features are based on the “one
touch operation” approach. This means that
a sequence of actions are executed at the
same time in both the television and the
recorder, provided both are fitted with the
EasyLink function and connected with the
eurocable supplied with your recorder.
is a trademark of New Transducers
Limited
 
						

							Do not insert the power plug in a wall socket or hang the TV to the wall
before all connections are made.
&Wall mounting instructions/Table stand/SwivelHow to mount the supplied stand and/or wall mount bracket and the
swivel, see the supplied separate Quick Start Guide.
Caution: Installing the TV requires special skills that should only be
performed by qualified personnel. You should not attempt to do the work
yourself. Philips bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using the supplied bracket to mount the TV:
- You can ask a qualified service personnel about using the bracket to
mount the display on the wall.
- Follow the instructions that come with the bracket before beginning
work.
- Make sure that the wall mount is being fixed securely enough so that it
meets safety standards.
The weight of the TV (excl. packaging) is about 20 kg.
éPlace or hang the TV wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar unit. To prevent any unsafe
situations, no naked flame sources, such as lighted candles, should be placed
in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
2
Safety warnings
Switch the TV on
Remote control
Press the power switch Bat the top of the TV.
An indicator on the front of the TV lights up and the screen comes on. If
the TV is in standby mode, press the 
-P+keys or the Bkey on the remote
control. Insert the 2 batteries supplied (Type R6-1,5V).
Be sure the (+) and (-) ends of the batteries line up correctly (inside of
case is marked.)
Make your connections&Insert the aerial plug firmly into the aerial socket xat the bottom of the
TV. For best picture quality use the suppressor-aerial cable supplied.
éBefore installing your TV, connect all your peripheral equipment.
“Insert the mains cord supplied into the mains at the bottom of the TV and
in the wall socket having a mains voltage of 198-264V.
To prevent damaging the power (AC) cord which could cause a fire or
electric shock, do not place the TV on the cord.
UK - EIRE
 
						

							3
The first time(and only the first time) you switch on your set, you see an installation introduction screen.
The installation procedureconsists of a series of screens that guide you through the process.
&After an introduction screen, you are asked to select a language of the TV’s on-screen-menus. (The text of the header and the info on screen
continuously change language.)
éPress the cursor up/down to highlight your language.
“Press the OKkey.
‘Follow the instructions on screen to proceed.
Note: Once you completed the initial installation procedure, you may access the screens from the Settings menu. See p. 8.
First time installation
Should your remote be lost or broken you can still change some of the basic
settings with the keys on the top of your TV.
Press the power switch Bto switch the TV on.
Press:
• the V- or + keys to adjust the volume;
• the 
P/CH - or + keys to select the TV channels or sources.
The 
MENUkey can be used to summon the Settings menu without the remote
control.
Use:
• the V- and + keys and the 
P/CH œand P/CH okeys to select menu
items;
• the 
MENUkey to confirm your selection.
Note:
When activated via the 
MENUkey on top of the TV, only Exitlets you dismiss the
menu.
Navigate to 
Exit, press the cursor right and then press the MENUkey.
MENU P/CHVB
Keys at the top of the TV
 
						

							4
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed
automatically after 6 seconds or press 
OKto remove immediately.
.@ TUV PQRS WXYZJKL GHI MNOABC DEF
✓
MODEON/OFFAmbilight
+
-+
-
DVD/R SAT TV VCR AUX
MENU
123
456
789
0
Ò
®‡
π º †
®
®®
®
VIEW-  FAVORITES  -
SELECT
DEMO
BROWSE
b
q
i
0
OK
=
_-
MOT
B
vkT
b
¬
PV
BStandby
Press to switch the TV on or off from or to
standby mode.
When switched to standby, a red indicator
on the TV lights up.
Note: the TV is never powered off completely
unless it is physically unplugged.DVD/R  SAT  TV  VCR  AUXPress the SELECTkey repeatedly to
select one of the system modes in
which the remote control can be used.
If no action is being undertaken within
60 seconds, the remote control
returns to TV mode.
After an action in the selected system
mode the remote control will remain
in this mode for 60 seconds and will
then return to TV mode.
vSelect connected equipment
Press and hold this key until the
source indication appears, then press
repeatedly to select
EXT1,EXT2,EXT3,EXT4,DV I,HDMI,Sideor TV,
according to where you connected your
peripheral equipment.
=BROWSEOn/Off  
Press to display the Browse menu On or
Off. See p. 6.
OK• to activate a setting
• to display the channel list
• starts playing content in the Multimedia
Browser application, p. 20.
(MOT) SWIVEL no function
MENUSettings menuon/off
See p. 8.
VVolume
Press + or - to adjust the volume.
¬Interrupt the sound or restore it.
Alphanumeric keys  
To select a TV channel. See p. 6.
iDisplay informationPress to display (when available)
information about the selected TV
channel and programme.
®Ò‡†ºπ• Audio and Video equipment keys.
See p. 31.
• Multimedia browser functional keys.
See p. 20.
DEMODemo on/offSee p. 7 
Colour keys
When functions are attached to the
colour keys, the colour keys show on
screen.
kTeletext index pageSee p. 21.
bTeletextOn/Off  See p. 21.
Cursor keys
Press the cursor keys up/down, left/right
to navigate through the menus.
+P-Channel selection
To browse through the TV channels
and sources stored in the preferred
channels list.
0Previous programme 
Press to alternate between the currently
viewed and the previously viewed TV
channel.
AMBILIGHT•ON/OFFPress to switch Ambilight On or Off.
For the Ambilight settings, see TV
menus, Ambilight, p. 18.
•
MODEPress this key repeatedly to toggle
through the Ambilight modes.
®Instant recordSee Record with your recorder with
EasyLink, p. 30.
FAVORITES•VIEWTo display a list of all channels
marked as favourite.
•✓To add or remove a channel in the
favourite list of TV channels.
Use of the remote control RC4310
 
						

							5
✓
MODEON/OFFAmbilight
+
-+
-
DVD/R TV VCR AUX
MENU
123
456
789
0
Ò
®‡
π º †
®
®®
®
VIEW-  FAVORITES  -
SELECT
DEMO
=
SAT
BROWSE
b
q
i
0
MOT
B
vkT
b
¬
PV
OK
.@ TUV PQRS WXYZJKL GHI MNOABC
_-DEF
qPicture format  
Press this key repeatedly to select another picture format: Auto format, Super
zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.
Auto format makes the picture fill the screen as much as possible.
In case of subtitles in the bottom black bar, Auto format makes the subtitles
visible. In case of a broadcaster logo in the corner of the top black bar, the logo
disappears from the screen.
Super zoom removes the black bars on the sides of 4:3 programmes with minimal
distortion.
When in Movie Expand 14:9, Movie Expand 16:9, Super zoom or Subtitle zoom
picture format, you can make subtitles visible with the cursor up/down.
Note: With HD sources not all screen formats will be available.
Auto formatSuper zoom4:3Movie expand 14:9
Movie expand 16:9Subtitle zoomWide screen
bDual screen/PIP
Press the bkey to switch on or off Dual screen or PIP, according to the format
selection made in the PIPformatlist in the Setup, Preferences/Picture/sound
preferences menu, p. 11.
PIP allows you to call up a subscreen within the main screen enabling you to
watch two TV channels or a TV channel and pictures from a peripheral at the
same time.
Dual screen allows you to divide the main screen into two subscreens enabling
two TV channels or a TV channel and an external source or a combination of one
of them with Teletext (see p. 21) to be watched simultaneously.
Note: Not all combinations might be possible. In such a case a message appears on the
screen.
&Press the cursor left/right to highlight the PIP window or the left/right screen
in Dual screen
éPress the -P+key or the vkey or the digit keys in order to change TV
channels, external sources or teletext pages in the highlighted screen.
Note: on screen information, which appears when changing channels, always
refers to the highlighted screen.
“Press the bkey again to return to a full main screen picture. The TV tunes
to the picture which was highlighted in the Dual screen or PIP mode.
Notes:
- Audio only plays from the main, when PIP has been selected, or from the left
screen, when Dual screen has been selected.
- When in Dual screen, two display formats are supported: full screen or
squeezed.
Multimedia browser content will always be displayed full screen.
- When PIP or Dual screen mode is activated, and a TV channel or source is
locked, the picture is grayed out.
Define the position of the PIP screen
&Press the cursor right to highlight the PIP screen.
éPress the red colour key on the remote control to select Position.
Note: If no action has been undertaken, the function bar at the bottom of the 
screen will disappear after a few seconds. Press any colour key to make it re-appear.
“Use the cursor keys to define the position of the PIP screen.
 
						

							6
The Browse screen (and the underlying Multimedia content browser) is
intended to contain all content, applications you are interested to consume.
If you want to connect your TV to a PC or home network, see the supplied
separate Connected Planet guide for further explanation of this functionality.
&Press the =key to activate.
éPress the cursor up/down to move the highlight up and down in the list of
menu items.
“Press the cursor right to go deeper into the structure.
• Television:
TV channelsleading to the list of TV channels.
• Multimedia:
Contains the devices (PC and locally connected devices like USBs or
memory cards) on which content (pictures, video and audio files) is stored.
See Multimedia browser, p. 19.
Alphanumeric keys on the remote control
The alphanumeric keys on the remote control can be used to enter digits
and text.
Multi-tap entry can be used to enter alphanumeric information when
necessary. The characters displayed are dependent on the language selected
in the Installation menu. See p. 8.
Text is entered similar to the method used for entering text messages on a
cellular phone.
When a letter or number has been entered, the cursor automatically
advances to the next character position after the specified time out or by
pressing the cursor right.
Also the cursor up/down can be used to enter alphanumeric information.
When finished, press the 
OKkey to confirm the entry.
Move to the left panel.
✓
MODEON/OFFAmbilight
+
-+
-
DVD/R TV VCR AUX
MENU
123
456
789
0
Ò
®‡
π º †
®
®®
®
VIEW-  FAVORITES  -
SELECTDEMO
=
SAT
BROWSEb
q
i
0
MOT
B
vkT
b
¬
PV
OK
.@ TUV PQRS WXYZJKL GHI MNOABC
ÒDEF
1  Ò
- 1  Ò 
- 1 (etc.)
2 a b c A B C 2 a b c (etc.)
3 d e f D E F 3 d e f (etc.)
4 g h i G H I 4 g h i (etc.)
5 j k l J K L 5 j k l (etc.)
6 m n o M N O 6 m n o (etc.)
7 pqr s PQRS7pqr s(etc.)
8 t u v T U V 8 t u v (etc.)
9 w x y z W X Y Z 9 w x y z (etc.)
0 . @ 0 . @ 0 (etc.)
RC key Default Multi-tap Alphanumeric entry order
RC_CURSOR_UPa  b  c  d  . .. A B C D ... 1 2 3 ... 0  _ - . @RC_CURSOR_DOWN@  . -  _   0 9 8 7 ... Z Y X ... z y x ... c b a
Key Default RC_CURSOR_UP/RC_CURSOR_DOWNAlphanumeric
Entry Order
Access and view multimedia content from memory devices and from your PC
Television
MultimediaTV channels
USBDevice1
USBDevice2
PC John
PC Study
 
						

							7
The Demomenu allows the user to get an idea of the features that are part of
the television.
&Select Demoin the Settings menu and press the cursor right.
éHighlight a desired demo with cursor up/down.
“Press OKto start playing the highlighted demo.
Note: The selected demo is played once.
Press the red colour key to exit the demo and to return to TV mode.
Note: The demos require no user interaction except for starting the demo.
Demo
How to navigate through the Settings menus
The Settings menu allows you to access and change settings and
preferences.
• Press the 
MENUkey on the remote control to summon the Settings menu.
- On the left panel the highlight can be set on a menu item with the cursor
up/down.
The right panel shows the content of the highlighted menu item in the left
panel.
Note: Sometimes not all the menu items are visible on the screen. Use the cursor
down to reveal all items.
- Use the cursor right to enter the right panel.
The content of the right panel is moved to the left panel and the right
panel shows the content of the newly highlighted item in the left panel.
Note: In some cases it is important that the picture can be watched while
adjusting the settings. This means that when the highlight is on the right side
panel, the other menu items hide away. When cursor left is pressed again, the
hidden menu items re-appear and the highlight moves to the left panel.
• Press the cursor left to go one menu level up again.
- Press the 
OKkey on the highlighted item to activate and to dismiss the
menu.
- Press the 
MENUkey again to exit the Settings menu.
Note: The menu is also dismissed by pressing one of the colour keys (if present)
referring to certain actions which may be executed.
Introduction
A lot of guiding instructions, help texts and messages will be displayed on your TV when using the menus or when trying to execute
an action.
Please, follow the instructions and read the help text which are being displayed on the specific item highlighted.
The colour keys refer to different actions which may be executed depending on the activated peripheral equipment. Press the
corresponding colour key on the remote control to perform the required action.
To use the menus
Settings
TV
Setup
Installation 
Demo
Exit
OK
œ
π
Demo
Picture
Sound
Ambilight
Features 
Info
Settings
TV
Picture
Sound 
Ambilight
FeaturesPicture
Personalisation tool
Smart picture
Contrast
Brightness 
Colour
Sharpness
Tint
......
Info
Settings
TV
Setup
Installation 
Demo
ExitDemo
Ambilight
Personalisation tool
Pixel Plus 2 
Active Control
Info
 
						

							8
It is possible that the cable company or the TV channel
displays a broadcast selection menu. Layout and items are
defined by the cable company or the TV channel. Make
your choice with the cursor and press the 
OKkey.
Searching for and storing TV channels is done channel by
channel.
You must go through every stepof the Manual
Installation menu.
Store TV  channels
After language and country are set correctly, you can now search for and store
the TV channels in two different ways: using Automatic Installation or Manual
Installation (tuning-in channel by channel, see further).
Automatic installation
&Select Automatic installationin the Installation menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)
éPress the cursor right to enter the Automatic installation.
The autoprogramming option label Start nowappears.
“Press the OKkey.
‘Press the green key Startto start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) is detected, a programme list appears. Without ACI broadcast,
the channels are numbered according your language and country selection.
You can use Reshuffle to renumber them. See p. 9.
Manual installation
&Select Manual installationin the Installation menu.
éUse the cursor right to enter the Manual installation menu.
“Select Selection mode.
Select either the frequency band, the C-channel option for aerial channels
or the S-channel option for cable channels.
‘Press the cursor down to select System.
Select your country or part of the world where you are now located.
(Press the cursor down to select Channel.Enter or select the number where you would like to store the TV channel.
§Press the cursor down to select Search.
The frequency or the C- or S-channel number increases until the TV
channel is found.
Note: If you know the frequency, the C- or S-channel number, enter the 3 or 2
digits of the frequency or the channel number directly with the digit keys 0 to 9
(e.g. 048).
èPress the cursor down to select Fine tune.
Adjust the frequency with the cursor up/down in case of poor reception of
the channel found.
!Press the cursor down to select Store.Press the cursor right and store the channel found with the OKkey.
Repeat steps 
(to !to search for another TV channel.
Select the menu language and country
&Press the MENUkey on the remote control.
éUse the cursor down to select Installationin the Settings menu.
“Use the cursor right to enter the Installation menu.
‘Select Languageand enter the list of available languages with the cursor
right.
(Select your language with cursor up/down and press the OKkey to confirm
your selection.
§Select Countrywith the cursor up/down and enter the list with the cursor
right.
Select the country where you are now located and press the 
OKkey.
èProceed with the Installation menu.
Installation
Settings
TV
Setup
Installation 
Demo
ExitInstallation
Language
Country
Automatic installation
Manual installation
Reshuffle/Rename channels
Preferred channels
Manual network installation
Software upgrade
Info
OK
œ
π
Installation
Manual installation
Selection mode
System
Channel
Search
Fine tune
Store
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/Rename chan
Preferred channels
Manual network installation
Software upgrade
 
						

							9
Reshuffle/Rename channels
You can change the order of the stored TV channels.
It is also possible to change the name stored in the memory or to assign a
name to a TV channel or external for which a name has not yet been
entered. A name with up to 5 letters or numbers can be given to the
programme number 0 to 99 and to the externals.
&Select Reshuffle/Rename channelsin the Installation menu.
éPress the cursor right. A channel list appears.
“Select the TV channel you want to reshuffle or to rename with the cursor
up/down.
Reshuffle
&Press the green colour key on your remote control. The highlight is on the
selected TV channel you want to exchange.
éSelect the new number you want to exchange the channel with the cursor
up/down.
“Press the green colour key on your remote control to swap the reshuffled
channel with the currently highlighted channel.
Note: Press the red colour key to cancel the reshuffling action.
‘Repeat to reshuffle other TV channels.
Rename
&Press the red colour key on your remote control. The highlight is on the
selected TV channel you want to rename.
éSelect the characters with the cursor up/down or with the alphanumeric
keys on the remote control.
“Select the following position with the cursor right.
‘Enter a new character.
(Press the green colour key or the OKkey when finished.
Notes:
- Press the yellow colour key to delete all characters. The cursor will be positioned
at the beginning.
- Press the blue colour key to delete the character the cursor is positioned. Enter a
new character with the cursor up/down.
- Space, numbers and other special characters are located between Z and A.
§Select another channel number and repeat steps éto (to do another
renaming.
Preferred channels
After leaving the Installation, you can browse through the TV channels with
the 
-P+key. Only those channels which are in the preferred list, will be
displayed. In this menu you can select which channels will be part of the
preferred list.
&Select Preferred channelsin the Installation menu.
éPress the cursor right to display the list of stored TV channels.
“Press the cursor up/down to select a TV channel you want to skip from the
preferred list.
‘Press the OKkey to confirm.
(Repeat for every channel you want to make non-preferred.
Reshuffle channels
Channel name
...............
............... 
Channel name
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Manual network installation
Software upgrade
Preferred channels
Channel name
...............
............... 
Channel name
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Manual network installation
Software upgrade
 
						

							10
Network installation
See the supplied separate Connected Planet guide for further explanation of
this functionality.
Software upgrade
This menu allows you to upgrade your TV software using a USB device or
Memory Card device.
USB device/Memory Card upgrade
It is possible to initiate an upgrade procedure from a USB device or
Memory card device before starting up the TV. The memory device must be
filled with the appropriate upgrade image (and structure) which can be
found on the www.philips.com/support website.
How to upload a new software version on your memory device,
see Annex  1, p. 38.
Software upgrade 
Current software info
Local upgrades/applications
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Manual network installation
Software upgrade
Software upgrade 
Current software info
Local upgrades/applications
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Manual network installation
Software upgrade