Philips 32pf9730 User Manual

31
✓
MODEON/OFFAmbilight
+
-+
-
DVD/R TV VCR AUX
MENU
123
456
789
0
Ò
®‡
π º †
®
®®
®
-  FAVORITES  -VIEW
SELECTDEMO
=
_-
SAT
BROWSEb
q
i
0
MOT
B
vkT
b
¬
PV
OK
.@ TUV PQRS WXYZJKL GHI MNOABC DEF
Bto switch to standby 
ºfor pause,
®for record,
Òfor rewind (
VCR,CD);
search down (DV D)
‡for stop,
πfor play,
†for fast forward (
VCR,CD);
search up (DV D)
ito display information
MENUto switch the menu on or off 
- P +for chapter, channel, track
selection0 to 9 digit entry,
cursor up/down
to select the next or...

32
Your TV remote control gives you the opportunity to control all your peripheral equipments with one single remote control. This can be
done by selecting the correct brand and type out of the list of Direct Entry codes for peripheral equipments.
Press the 
SELECTkey repeatedly to select DVD/R,SAT,VCRor AUX according to the peripheral equipment you want to operate with
this remote control. See Use of the Remote control, p. 4. If the function keys on the remote control also work the selected peripheral...

33 CD
Bose..............................................................512
Hitachi..........................................................501
JVC................................................................504
Kenwood .....................................................502
Panasonic.....................................................505
Philips ...........................................................500
Pioneer ........................................................511
Samsung...

34
Your TV remote control supports a learnable function which makes it possible to read out codes coming from another remote control
from equipment from another brand.
This makes it possible to use only one remote control to control all your other connected peripheral equipment.
For the following equipment the highlighted keys are programmable.
Note: You can put whatever function of your other device remote under one of the highlighted keys.
&Press the SELECTkey of your TV remote control repeatedly to...

35
To put the remote control function keys back to the factory mode
&Press the SELECTkey repeatedly to select TVmode.
éPress the OKkey and the ¬key simultaneously for at least 5 seconds.
All the SELECTLEDS will light up.
“Press the SELECTkey
• 1x:DVD/Ris lit up
• 2x:SATis lit up
• 3x:VCRis lit up
• 4x:AUXis lit up
• 5x:DVD/R,SAT,VCR,AUXare lit up.
‘Press the OKkey when one or all mode LEDS are lit.
The function keys which were ‘learned’ will be erased or from the selected destination source or from all...

36
Symptoms Items to Check and Actions to follow
Poor Picture
• Have you selected the correct TV system in the manual installation menu?
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon 
lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct frequency.
See...

37
Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen. An anti-theft Kensington lock has to be
purchased separately.
The Kensington lock is a plastic-coated steel cable with a lock. One end has to be fixed to the opening of the TV and locked
with a special key. The other end is attached to a fixed point.
® Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications
in other countries throughout the...

Introduction
Philips offers software upgrade capability for your TV using portable
memory.
After you have completed a software upgrade, your TV will typically
perform better.
What improvements are made depends on the upgrade software you are
using as well as the software your TV contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing technical or
software skilled users.
Preparing a portable memory for software...

39
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a directory
called “Upgrades” located in the root of the USB portable memory. You can
rename the file if you like but keep the .
upgextension.
&Insert the portable memory that contains the downloaded software
upgrade.
éSelect Software Upgradein the Installation menu. Go to Local
upgrades/applications.
The TV will list all compatible software available on the USB portable
memory and display the data for each...

40
 

Title of the slideshow
audio_url
30

slide_1_url 
slide_2_url 
slide_3_url 
slide_4_url 
slide_5_url 
slide_6_url 
...  
slide_N-1_url 
slide_N_url 


Notes:
- The latest version of this document can be found on the Philips support website (www.philips.com/support).
Use the type number of your TV (42PF9830/10) to find this documentation and other related files.
- Philips can’t be held responsible for any problems that may occur as a result of the content in this document. Errors reported to
Philips...