Philips 32pf9641d User Manual

Notes:
- only a PC with digital sound can be connected to the HDMIconnection;
- if your PC does not have digital sound output, connect your PC via a VGA connector;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
Connect a PCEN
51 51
PC equipped with a DVI connector:
1. Use a DVI to HDMI cable to connect to one of
the 
HDMIconnectors of your TV 1.
2. Connect the audio cable...

Connect a Home Cinema amplifierEN
52
Digital Home Cinema amplifier

To receive scrambled DTV signals you will need a
CA (Conditional Access) module and a Smart card
provided by the service provider.
A CA module can enable additional services, for
example Pay TV.
Contact your Common Interface service provider
to get more information about these modules.
Although CA module types may vary dependent
on the manufacturer, each one of the CA modules
supports a certain kind of encryption system. Your
TV supports CA modules to work with the DVB-T
standard.
Note that a smart card...

Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 33.
1. Press the 
MENU/BROWSEkey.
2. Select TV menuand press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected input
9. Select the peripheral...

Most of the audio and video equipment from our range of
products can be operated with the remote control of your TV.
Press one of the keys after you pressed one of the mode keys
(
DV D,STB,VCR,AUX) according to the equipment you want to
operate with this remote control.
See Use of the Remote control, p. 5-6.
Bto switch to standby 
®for record,
Òfor rewind (
VCR,CD);
search down (
DV D)
‡for stop,
πfor play, for pause
†for fast forward (
VCR,CD);
search up (
DV D)
ito display information
MENU/BROWSEto...

56
EN
Symptom Possible cause/Remedy
No picture<
Verify if the supplied cables are connected properly. (The aerial cable to the
TV, the other aerial to your recorder, the power cables, ..)

Your TV remote control gives you the opportunity to control
your Philips DVD or DVD/R.
1. Press the 
DV Dmode key for 4 seconds until the LED lights
up constantly
2. Enter the code 500 with the digit keys for a Philips DVD
player.
Enter the code 542 with the digit keys for a Philips DVD
recorder.
>All mode LEDs will blink fast for 3 seconds as a
confirmation you entered the correct code.
If you entered a wrong code all mode LEDs will stay on
for 2 seconds. Redo Step 2.
>Your remote control is in the DVD...

Introduction
Philips offers software upgrade capability for your TV using
portable memory. After you have completed a software
upgrade, your TV will typically perform better.
What improvements are made depends on the upgrade
software you are using as well as the software your TV
contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing
technical or software skilled users.
To prepare a portable memory for software...

Automatic software upgrade procedure
1. Switch off your TV and remove all memory devices.
2. Insert the USB portable memory that contains the
downloaded software upgrade.
3. Switch on your TV with the power key Bat the side of the
TV.
4. At startup the TV will scan the USB portable memory until
it finds the update content. The TV will automatically go to
the upgrade mode. After a few seconds it will display the
status of the upgrade procedure.
5. When the software upgrade was successful, remove the USB...

Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file
in a directory called “Upgrades” located in the root of the
USB portable memory. You can rename the file if you like
but keep the .upg extension.
1. Insert the portable memory that contains the downloaded
software upgrade.
2. Select Software Upgradein the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the USB
portable memory and display the data for each selected...