Philips 32pf9641d User Manual

							Notes:
- only a PC with digital sound can be connected to the HDMIconnection;
- if your PC does not have digital sound output, connect your PC via a VGA connector;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
Connect a PCEN
51 51
PC equipped with a DVI connector:
1. Use a DVI to HDMI cable to connect to one of
the 
HDMIconnectors of your TV 1.
2. Connect the audio cable 2to the 
DIGITAL
AUDIO IN
connector of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33, and link it to 
HDMI 1or 2.
4. Also select Digital audio inin the same
Connections menu.
51
PC equipped with a VGA connector:
1. Use a VGA to RGB H/V cable 1to connect
to the 
RGB H/Vconnectors of your TV.
2. Connect the audio cable 2to the 
AUDIO R
(right) and L(left) inputs of the TV.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33.
Pr Pb Y
R B G
AUDIO L/R
HV
EXT2 EXT1EXT3
EXT3 :
RGB V/H
1
EXT3 :
AUDIO L/R
VGA
2
75HDMI 1  HDMI 2 ANTENNA75oDIGITAL AUDIO INoDISPLAY SYNCHRONIZEDo o o o oAUDIO OUT
LR
OUT AUDIODIGITAL
Pr Pb Y
R B G
AUDIO L/R
HV
EXT2 EXT1EXT3
HDMI 1/2
HDMI
DVIDIGITAL
AUDIO
IN
1
2
 
						

							Connect a Home Cinema amplifierEN
52
Digital Home Cinema amplifier

						

							To receive scrambled DTV signals you will need a
CA (Conditional Access) module and a Smart card
provided by the service provider.
A CA module can enable additional services, for
example Pay TV.
Contact your Common Interface service provider
to get more information about these modules.
Although CA module types may vary dependent
on the manufacturer, each one of the CA modules
supports a certain kind of encryption system. Your
TV supports CA modules to work with the DVB-T
standard.
Note that a smart card may only be valid for a
single broadcast channel.
CA modules and smart cards are neither supplied
nor optional accessories from Philips.
The CA module is responsible for the messages
and texts on screen. In case of failure or strange
behaviour, you must call your CI service
broadcaster.
Insert a CA module 

						

							Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 33.
1. Press the 
MENU/BROWSEkey.
2. Select TV menuand press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected input
9. Select the peripheral equipment with the cursor up/down.
Select connected equipmentEN
54
a
Record a TV programme 
You can record a TV programme using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note: when recording analogue progammes, switching
channel numbers on your TV does not disturb recording !
Note: to record digital programmes to an analogue recorder, the TV needs to be switched on and
tuned to that digital programmes.
Record with your recorder
 
						

							Most of the audio and video equipment from our range of
products can be operated with the remote control of your TV.
Press one of the keys after you pressed one of the mode keys
(
DV D,STB,VCR,AUX) according to the equipment you want to
operate with this remote control.
See Use of the Remote control, p. 5-6.
Bto switch to standby 
®for record,
Òfor rewind (
VCR,CD);
search down (
DV D)
‡for stop,
πfor play, for pause
†for fast forward (
VCR,CD);
search up (
DV D)
ito display information
MENU/BROWSEto switch the menu on or off 
- P +for chapter, channel, track selection
0 to 9digit entry,
cursor up/down to select the next or the previous disc
(
CD)
cursor left/right to select the previous or following
track (
CD)
0to select a DVD title/chapter;
index (
AUX)
bto select your choice of
subtitle language (
DV D)
Normal mode: if no action is being undertaken within 30
seconds, the remote control returns to TV mode.
Expert mode: in Expert mode the remote will stay in the
selected mode even when the 30 seconds time-out is elapsed.
To select between Normal and Expert mode
1. Select TV mode with the TVkey.
2. Press the 
OKkey simultaneously with the ¬key for four
seconds.
>When the Bkey is On for one second, the Expert mode
is selected and the remote control will remain in the
mode selected.
3. Select the desired mode (
DV D,STB,VCR,AUX)
4. To go back to the TV mode, select 
TVand repeat steps 
1 to 3.
Audio- and video equipment keysEN
55
a
v
 
						

							56
EN
Symptom Possible cause/Remedy
No picture<
Verify if the supplied cables are connected properly. (The aerial cable to the
TV, the other aerial to your recorder, the power cables, ..)

						

							Your TV remote control gives you the opportunity to control
your Philips DVD or DVD/R.
1. Press the 
DV Dmode key for 4 seconds until the LED lights
up constantly
2. Enter the code 500 with the digit keys for a Philips DVD
player.
Enter the code 542 with the digit keys for a Philips DVD
recorder.
>All mode LEDs will blink fast for 3 seconds as a
confirmation you entered the correct code.
If you entered a wrong code all mode LEDs will stay on
for 2 seconds. Redo Step 2.
>Your remote control is in the DVD or DVD/R mode.
To cancel the selected mode
The remote control will return to 
TVmode.
Annex 1:To set the remote control to work a Philips DVD or DVD/R
57
EN
a
 
						

							Introduction
Philips offers software upgrade capability for your TV using
portable memory. After you have completed a software
upgrade, your TV will typically perform better.
What improvements are made depends on the upgrade
software you are using as well as the software your TV
contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing
technical or software skilled users.
To prepare a portable memory for software upgrade
For the procedure you will require:
- a personal computer with web browsing capability;
- an archive utility that supports the ZIP-format (e.g. WinZip for
Windows or Stuffit for Mac OS);
- a preferably empty USB memory stick.
New software can be obtained from your dealer or can be
downloaded from the www.philips.com/support website:
1. Go to www.philips.com/supportusing the web browser
on your PC.
2. Follow the procedure to find the information and the
software related to your TV.
3. Select the latest software upgrade file and download it to
your PC.
4. Decompress the ZIP-file and copy the file “autorun.upg” to
the root directory of the USB portable memory.
To verify the version of the TV software
Before you start the software upgrade procedure, it is advised
to check what the current TV software is.
1. Select Software Upgradein the TV menu, Installation,
Software upgrade.
2. Press the cursor right.
>The Software Upgrade menu moves to the left panel.
3. Select Current Software Infoto observe the version and
the description of the current software.
Annex 2 - Philips TV software upgrade with portable memoryEN
58
Note: only FAT/DOS-formatted portable memory is
supported.
Note: only use software upgrades that can be found on the
www.philips.com/support web site.
Info
TV menu
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
............. 
Time zone
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
 
						

							Automatic software upgrade procedure
1. Switch off your TV and remove all memory devices.
2. Insert the USB portable memory that contains the
downloaded software upgrade.
3. Switch on your TV with the power key Bat the side of the
TV.
4. At startup the TV will scan the USB portable memory until
it finds the update content. The TV will automatically go to
the upgrade mode. After a few seconds it will display the
status of the upgrade procedure.
5. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch Bat the side of the TV.
Your TV will start up with the new software.
Annex 2   (Continued)EN
59
Warning:
- you are not allowed to remove the USB portable
memory during the software upgrade procedure;
- in case of a power drop during the upgrade procedure,
don’t remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power
comes back;
- if you try to upgrade to a software version lower than
the current version, a confirmation will be asked.
Downgrading to older software should only be done in
case of real necessity;
- if an error occurs during the upgrade you should retry
the procedure or contact your dealer;
- the automatic software upgrade procedure will only start
if the version on the USB portable memory is different
from the one in the TV.
Note: once the upgrade is finished use your PC to
remove the TV software from your USB portable memory.
Software Id: TL32E-234
Loading    Done
Validating Done
Programming
Software Upgrade Application
Upgrade busy...
 
						

							Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file
in a directory called “Upgrades” located in the root of the
USB portable memory. You can rename the file if you like
but keep the .upg extension.
1. Insert the portable memory that contains the downloaded
software upgrade.
2. Select Software Upgradein the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
3. Select the correct upgrade version and press the red colour
key to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode. After a few seconds it will display the status of the
upgrade procedure.
4. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch Bat the side of the TV. Your TV will start up with
the new software.
Annex 2   (Continued)EN
60
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
Info
TV menu
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
............. 
Time zone
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade