Philips 32pf9551 User Manual

							Annex 2   (Continued)EN
51
Automatic software upgrade procedure
1. Switch off your TV and remove all memory devices.
2. Insert the USB portable memory that contains the
downloaded software upgrade.
3. Switch on your TV with the power key Bat the side of the
TV.
4. At startup the TV will scan the USB portable memory until
it finds the update content. The TV will automatically go to
the upgrade mode. After a few seconds it will display the
status of the upgrade procedure.
5. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch Bat the side of the TV.
Your TV will start up with the new software.
Warning:
- you are not allowed to remove the USB portable
memory during the software upgrade procedure;
- in case of a power drop during the upgrade procedure,
don’t remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power
comes back;
- if you try to upgrade to a software version lower than
the current version, a confirmation will be asked.
Downgrading to older software should only be done in
case of real necessity;
- if an error occurs during the upgrade you should retry
the procedure or contact your dealer;
- the automatic software upgrade procedure will only start
if the version on the USB portable memory is different
from the one in the TV.
Note: once the upgrade is finished use your PC to
remove the TV software from your USB portable memory.
Software Id: TL32E-234
Loading    Done
Validating Done
Programming
Software Upgrade Application
Upgrade busy...
 
						

							Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file
in a directory called “Upgrades” located in the root of the
USB portable memory. You can rename the file if you like
but keep the .upg extension.
1. Insert the portable memory that contains the downloaded
software upgrade.
2. Select Software Upgradein the Installation menu. Go to
Local upgrades.
The TV will list all compatible software available on the USB
portable memory and display the data for each selected
upgrade version.
3. Select the correct upgrade version and press the red colour
key to start the upgrade.
Your TV will restart and will automatically go to the upgrade
mode. After a few seconds it will display the status of the
upgrade procedure.
4. When the software upgrade was successful, remove the USB
portable memory and restart your TV with the power
switch Bat the side of the TV. Your TV will start up with
the new software.
Annex 2   (Continued)EN
52
Warning: if you try to upgrade to a software version
equal or lower than the current version, a confirmation
will be asked. Downgrading to older software should only
be done in case of real necessity.
Info
TV menu
Installation
Software upgrade
Current softw. info
Local upgrades
Announcement
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade 
 
						

							Introduction
This document explains how to make a Philips slideshow file with background audio.
Be aware that the content of this document is addressing technical or software skilled users.
To start the slideshow open the slideshow file in the Multimedia browser of your TV.
1. Press the 
MENU/BROWSEkey on the remote control after having inserted a USB device and
switched on the TV.
2. Go to where you stored the slideshow file (.alb) on your portable memory.
3. Select the slideshow file and press the 
OKkey to start the slide show.
4. To stop a slide show, press the ‡key.
General Rules
- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow
files using simple tools.
- All references to network content must be based on the global address of the content.
- Content on a Portable Memory (PM) doesnt have a global address; as a result content from a PM
can never be referenced from a slideshow not stored on the PM itself.
- To maintain portability, a slideshow stored on a PM should ONLY reference content on the same
PM. Referencing global addresses can result in inconsistencies if the PM is used on a non-
networked CE device. The latter is however not forbidden, it is only a recommendation.
- It is preferable that URL’s referencing PM content are based on a relative path starting from the
directory where the slideshow is stored. This path includes the device or drive name of the PM.
An absolute path to content will also be supported.
- relative path: pictures	est1.jpg, tamper.jpg, ..
ew\bird.jpg, …
- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …
General Format
The format and syntax below will be used to create the slideshow file (simple ascii text) with the
extension .alb (.ALB). Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, … 
The following syntax should be used to create the text file:
 

Title of the slideshow
audio_url
30

slide_1_url 
slide_2_url 
slide_3_url 
slide_4_url 
slide_5_url 
slide_6_url 
...  
slide_N-1_url 
slide_N_url 


Annex 3 - Philips TV-Slideshow Format with background music
53
EN
Notes:
- the latest version of this document can be found on the Philips support website
(www.philips.com/support).
Use the type number of your TV to find this documentation and other related files.
- Philips can’t be held responsible for any problems that may occur as a result of the content in this
document. Errors reported to Philips will be adapted and published on the Philips support website
as soon as possible.
 
						

							Annex 3  (Continued)
54
EN
Supported XML-tags
The following table gives a description of the XML syntax.
Tag Name
philips-slideshow
title
audio
slide-duration
slides
slideUse
mandatory
optional
optional
optional
mandatory
optionalDescription
Philips slideshow signature including the version.
The title of the playlist.
The audio-URL following this tag will define the music playing
in the background during the slideshow.
A single song or playlist (.m3u & .pls) are the only valid audio
references. Other reference will not result in any audio
playback. If a single song is referenced the song will be
repeated forever. If a playlist is referenced the playlist will be
played in sequence with a repeat at the end of the playlist.
The default display time (in 0,1 second) of a slide. The TV
application isn’t obliged to support this tag. The TV application
can force the use of one or multiple predefined display times.
Identifies the slides to show.
Identifies the URL of the individual slide.
 
						

							Digital Camera Issues
If a USB connection between your digital camera and the TV isn’t working, you can try the
solutions below to resolve your problem.
- Make sure your digital camera is switched on and verify if the configuration of your digital camera
is correct (see the manual of your digital camera for more information).
- Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface
is switched on before connecting to the TV.
- If you have a digital camera with only internal memory (no removable memory) you can try to
copy the content manually to a USB memory device using a personal computer.
- Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link”
and USB Mass Storage. Make sure that you select USB Mass Storage or “PC Drive” on your
digital camera.
- If your camera supports different interface settings be sure to try them one by one or contact
the reseller of your camera to find out the correct setting.
USB Memory Device Issues
- Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your
device (digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it
will not be detected by the content browser of the TV.
- The following subsets of the Mass Storage Class specification are supported:
The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class
Specification Overview” (v1.2, June 23, 2003) including all documents referenced by the
document. The document can be found on the USB standardisation website (www.usb.org).
Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).
Full support of SubClass Code = 05h; SFF-8070i spec.
Full support of SubClass Code = 06h; SCSI transparent command set.
- For large USB memory devices, when you are in the Content Browser, it may take a long time
before you can access your files.
- When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is
advised to use the external power supply of the portable harddisk to guarantee proper working
under all conditions.
Annex 4 - Philips TV - Digital camera and USB issues
55
EN
Notes:
- the latest version of this document can be found on the Philips support website
(www.philips.com/support);
- the software of your TV is upgradeable. If you have problems first check if you have the latest
software installed on your TV. The latest software, together with instructions, can be found on the
Philips support website. Use the type number of your TV to find this documentation and other
related files.
- Philips can’t be held responsible neither for any errors in the content of this document nor for any
problems as a result of the content in this document. Errors reported to Philips will be adapted
and published on the Philips support website as soon as possible.
 
						

							Annex 5 - Issues referring to connected peripherals with a HDMI connector
56
EN
The HDMI INconnector allows the following TV and monitor display modes:
HDStandard Definition TV (SDTV) 640x480i
720x480i
720x576i
Enhanced Definition TV (EDTV) 640x480p
720x480p
720x576p
High Definition TV (HDTV) 1920x1080i
1280x720p
PCVGA 640x480
SVGA 800x600
XGA     1024x768
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from
a peripheral equipment connected to the 
HDMIinput, the Digital audio output signal is muted.
- Your TV supports HDCP (High-bandwidth Digital Content Protection). This is a system for
protecting DVD content outputted via HDMI from being copied. It provides a secure digital link
between a video source (DVD, PC, etc.) and your TV. Content is encrypted at the source
peripheral equipment to prevent unauthorised copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length
to max. 5 m.
- Digital peripheral equipments from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
-  In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then
on again.
To get an optimal viewing, it is advised to switch your DVD player, Blu-Ray of HD settop box to the
highest possible supported display modes.
Note: teletext will not be available via equipment connected to a HDMIconnector.
 
						

							active control ........................... 16
ambilight .................................... 19
antenna......................................... 4
audio receiver .......................... 45
audio equipment keys ............. 47
auto format ............................... 16
automatic installation.............. 26
avl (audio volume leveller)..... 18
balance ....................................... 17
batteries ................................ 4, 58
brightness .................................. 14
camera ....................................... 38
camcorder ................................. 38
care of the screen ..................... 2
change code  ............................ 23
channel list........................... 11,31
child lock ................................... 23
clock ............................................. 7
colour......................................... 14
colour enhancement ............... 16
colour keys.................................. 5
comp. video connectors.....41,43
connections............................... 37
contrast ..................................... 14
country selection..................... 25
cursor keys.................................. 5
custom colour .......................... 21
custom tint................................ 15
decoder...................................... 29
delta volume ............................. 18
demo .......................................... 24
digital natural motion ...............15
DNR ........................................... 15
dual I/II ....................................... 17
DVD player ............................... 42
DVD recorder .................... 40,41
DVI connector .................... 42,44
dynamic contrast ..................... 15
equalizer .................................... 17
euroconnector .............. 40,41,45
factory settings......................... 30
favourite key ............................. 31
favourite channel list ............... 31
features adjustment menu ..... 22
fine tune..................................... 26
first time installation ................. 9
game...................................... 38,42
HDMI connector ..................... 42
headphone................................. 38
headphone volume .................. 18
home cinema amplifier ........... 45hue .............................................. 14
hypertext ................................... 36
installation menu...................... 25
light sensor ............................... 16
location ...................................... 28
manual installation ................... 26
menu key ................................... 11
menu language .......................... 25
MPEG reduction ...................... 16
multimedia browser ................ 32
mute key ...................................... 5
navigate through the menus .. 11
on screen language .................... 9
on screen information .............. 6
on timer..................................... 24
option key ................................... 7
OK key ......................................... 5
PC ............................................... 44
picture adjustment menu ....... 14
picture format .......................... 16
PIN code ................................... 23
pixel plus.................................... 15
preferences menu .................... 28
previous channel ........................ 6
programme title ....................... 28
quick access menu ..................... 7
rear panel overview ................ 39
rearrange channel list ............. 27
record a TV programme ........ 46
recycling..................................... 58
reinstall ...................................... 27
remote control........................... 5
reset factory settings .............. 30
rename ....................................... 27
reshuffle ..................................... 27
safety warnings ........................... 2
satellite receiver ...................... 43
search for channels ................. 25
select your connections ......... 29
select connected equipment . 46
set code ..................................... 23
settings assistant ...................... 10
side connectors ....................... 38
sharpness ................................... 14
sleeptimer ................................. 22
slideshow format ..................... 53
software upgrade ............... 30,50
sound adjustment menu......... 17
standby key.................................. 5store channels .......................... 26
subtitles...................................... 22
surround mode ........................ 17
switch the TV on........................ 8
teletext ...................................... 35
teletext menu ........................... 36
teletext 2.5................................ 28
tint .............................................. 14
T.O.P. teletext pages ................ 35
troubleshooting........................ 48
tv menu settings ...................... 12
uninstall ...................................... 27
usb connector .......................... 38
usb device.................................. 32
video equipment keys ............. 47
volume ...........................................5
VCR ............................................ 40
Index
57
EN
 
						

							58
EN
RThe packaging of this product is intended to
be recycled. Apply to the local authorities for
correct disposal.
Disposal of your old product
Your product is designed and manufactured with
highly quality material and components, which can
be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products. Please act according to your local rules
and do not dispose of your old products with
your normal household waste.
The correct disposal of your old product will help
prevent potential negative consequences for the
environment and human health.The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on
how to dispose of exhausted batteries according
to local regulations.
Recycling
Recycling
Product information
- Your TV consumes energy in standby mode. Energy consumption contributes to air and
water pollution. Very low standby power consumption.
- Specifications: see the product leaflet on www. philips. com/support.
- If you need further assistance, please call the customer support service in your country.
The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee
booklet.
Disposal of batteries