Philips 32pf9551 User Manual

							Custom colour
Allows you to customise the ambilight colour.

						

							The Features menu allows you to control the settings of special
TV functions, features and accessory equipments.
1. Press the 
MENU/BROWSEkey on the remote control.
>The main menu appears.
2. Select TV menuand press the cursor right.
>The TV Menu is moved to the left.
3. Select Featuresand press the cursor right.
>The Features menu is moved to the left panel.
4. Use the cursor up/down to select the Features menu items.
5. Press the cursor right to enter the selected Features menu
item.
6. Use the cursor keys to adjust the settings.
7. Press the cursor left to return to the Features menu.
Subtitle
This displays Teletext subtitles from the selected TV channel.
These can be permanently displayed, or only when mute is
active. The teletext subtitle page must be stored for each TV
channel.
1. Switch on teletext and select the proper subtitle page from
the index.
2. Switch off teletext.
3. Select 
-Subtitle Onto display the subtitles on the selected TV
channels.
- On during muteto automatically display the subtitles
only when the sound has been muted with the ¬key on
the remote control.
Sleeptimer
This sets a time period after which the TV automatically
switches to standby.
1. Select Sleeptimer.
2. Press the cursor right.
3. Select a value with the cursor up/down.
>The list will have values from 0 to 180 minutes. When 0
is selected, the sleeptimer is switched off.
Adjust feature menu settingsEN
22
Note: you can always switch off your TV earlier or select
another time set.
Tip: this function is also accessible via the OPTIONkey on
the remote control.
Info
TV menuFeatures
Subtitle
Sleeptimer
Childlock
Set/Change code
On timer
DemoTV settings
Features
Installation
Exit
 
						

							Childlock
With a 4-digit code, you are able to lock TV channels and
external sources to prevent children from watching certain
programmes.
1. Select Childlock.
2. Press the cursor right to enter the Childlock menu.
3. Enter your 4-digit code.
4. Select one of the menu items of the Childlock menu and
press the cursor right:
-Lockto lock all channels and externals:
-Custom lockto lock a certain programme or to lock all
the channels from a certain time.
< Select:
-Lock afterto lock all programmes from a certain time
onwards.

						

							On timer
From standby, this automatically switches the TV to the
specified channel number, at a specified time.
1. Select On timer.
2. Press the cursor right to enter the On timer menu.
3. Select Timerand press the cursor right.
4. Select On.
5. Select Channeland then the TV channel you want your TV
to switch to on a selected time and day
6. Select Dayand then a day of the week or select Daily.
7. Select Timeand enter the time with the digit keys or with
the cursor up/down.
8. Press the 
OKkey to activate.
9. Press the cursor left to return to the Features menu or
press the 
MENU/BROWSEkey to switch off the menu.
Demo
This allows you to get an idea of the features that are part
of the television.
1. Select Demo.
2. Press the cursor right.
3. Select a desired demo.
4. Press the 
OKkey to start the demo.
>The selected demo is played once.
5. Press the red colour key to stop the demo and to return to
the demo menu.
6. Press the red colour key to exit the demo menu.
Adjust feature menu settings  (Continued)EN
24
Info
TV menu
Features
Demo
Pixel Plus
Ambilight
Settings assistant
Active control
Subtitle
Sleeptimer
Childlock
Set/Change code
On timer
Demo
Note: From now on,every week, your TV  will
automatically switch to the selected channel, on the
selected day, at the selected time, until the On timer
function is switched off again.
Note: only one On timer can be set.
Info
TV menuFeatures
Subtitle
Sleeptimer
Childlock
Set/Change code
On timer
DemoTV settings
Features
Installation
Exit
 
						

							EN
25 25
How to search for and store TV channels
This menu allows you to select your preferred menu language.
1. Select the language menu item and enter the list of available
languages with the cursor right.
2. Select your language with the cursor up/down.
3. Press the 
OKkey to confirm your selection.
Select your menu language
This menu will adjust settings related to the installation of the
TV channels, language and country and to the initial installation
of your TV.
1. Press the 
MENU/BROWSEkey on the remote control.
>The main menu appears.
2. Select TV menuand press the cursor right.
>The TV Menu is moved to the left.
3. Select Installationand press the cursor right.
>The Installation menu is moved to the left panel.
4. Use the cursor up/down to select the Installation menu
items.
5. Press the cursor right to enter the selected Installation
menu item.
6. Use the cursor keys to make a selection.
7. Press the 
OKkey to activate or to confirm.
8. Press the cursor left to return to the Installation menu or
press the 
MENU/BROWSEkey to switch off the menu.
Installation menu
Tip: you will need this chapter only if you want to change the installation settings.
Info
TV menuInstallation
Languages
Country
Channels
Preferences
Connections
Decoder
.............TV settings
Features
Installation
Exit
Info
TV menu
Installation
Languages
Menu language
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Television
MultimediaTV menu
TV channels
Select your country
Note: if you select a wrong country, the channel numbering
will not be according to the standard for your country. This allows you to select the country where you are now
located.
 
						

							EN
26 26
How to search for and store TV channels  (Continued)
Info
TV menu
Installation
Channels
Autom. installation
Manual installation
Rearrange
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
After language and country are set correctly, you can now
search for and store the TV channels.
All available TV channels are searched for and stored
automatically.
This will take a few minutes.
>When the search is complete, the menu will indicate the
number of channels found.
Manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels.
1. Select Manual installationand press the cursor right.
2. Select System.
3. Select your country or part of the world where you are
now located.
4. Select Searchand press the cursor right.
5. Select the red or green colour key to proceed.
6. Press the cursor left to store the channel found or to
search for another channel.
7. Select Fine tuneand press the cursor right.
Fine tuning can be useful when the frequency has shifted a
bit or when interference of another frequency occurs.
Adjust the frequency with the cursor up/down in case of
poor reception of the channel found.
8. Select Store current channelif you want to store the
frequency under the current channel number.
Press the cursor right and confirm with the 
OKkey.
Select Store as new channelif you want to store the
frequency under a new channel number.
Press the cursor right and confirm with the 
OKkey.
9. Use the rearrange menu to rename or reshuffle the
channels.
Store TV  channels
Tip: if you know the frequency, enter the 3 digits of the
frequency with the digit keys 0 to 9 (For example, 049).
 
						

							This allows you to rename, to reshuffle and to uninstall or
reinstall the stored channels.
The uninstalled channel is indicated in the list by an icon
in front of the uninstalled channel.
3. Press the green colour key again to reinstall the uninstalled
channel.
Rearrange the channel number listEN
27 27
27
Notes:
- press the yellow colour key to delete all characters. The
cursor is positioned at the beginning again;
- press the blue colour key to delete the character the
cursor is positioned. Enter a new character with the
cursor up/down;
- a name can be given to the channel numbers 0 to 999;
- space, numbers and other special characters are located
between Z and A.
Rearrange
0
1
2
3
4
5
6
7
Rename UninstallMove
upMove
down
Info
TV menu/Installation
Channels
Rearrange
0
1
2
3
4
5
6
7
Automatic instal...
Manual installation
Rearrange
Info
TV menu
Installation
Channels
Autom. installation
Manual installation
Rearrange
Languages
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
 
						

							This menu contains items that can set or adjust various special
TV functions and that will typically be accessed only
occasionally.
Select your location
This allows you to select the location of your TV.
If you choose for Shopit will result in fixed settings of
picture, sound and ambilight.
The location Homewill give full flexibility to change any
predefined settings for picture, sound and ambilight.
Select Teletext  2.5
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures in the
teletext pages.

						

							EN
29
This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
1. Select Connections.
2. Press the cursor right.
3. Select the input to which the peripheral equipment is
connected.
>When you select 
EXT1,EXT2,EXT3,HDMI 1,
HDMI 2,Sideor Digital Audio  In, a list appears
which allows you to identify which type of peripheral
equipment is attached to this input.
4. Press the cursor right again to enter the list of types of
peripherals connected to the selected input.
5. Select the peripheral equipment with the cursor up/down.
Digital Audio  In
If a peripheral equipment has a digital audio output, you can
connect this with a single cable to the TV’s DIGITAL
AUDIO INconnector.
In the Connections menu, assign the Digital Audio In to the
corresponding external input to which your peripheral
equipment is connected.
In addition to accepting audio input via Digital Audio In, the
TV can output encoded Dolby Digital audio via the
DIGITAL AUDIO  OUTconnector to an external amplifier
or receiver. If your amplifier or receiver has a matching
connector for Digital Audio In, you can connect it with a
single cable to the TVs 
DIGITAL AUDIO  OUT.
See To make video and audio connections, Connect a Home
Cinema amplifier, p. 45.
Select your connections
Select a Decoder channel number
This allows you to define one or more channel numbers as
decoder channel numbers when a decoder or a descrambler is
connected to 
EXT1or EXT2.
1. Select the channel number under which you have stored the
programme that comes from your decoder or descrambler.
2. Select Status.
3. Select the input used to connect your decoder:None,
EXT1or EXT2.

						

							EN
30
Reset the Factory settings
This allows you to upgrade your TV software using a USB
device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device (before you start up the TV). The memory device
must be filled with the appropriate upgrade image (and
structure) which can be found on the www.
philips.com/software website.
How to upload a new software version on your memory
device, see Annex 2, Philips TV software upgrade with
portable memory, p. 50.
Automatic software announcement (if present)
When you switch on your TV a message may appear that a
new software upgrade is available.