Philips 32pdl7906t User Manual
Here you can view all the pages of manual Philips 32pdl7906t User Manual. The Philips manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
EN 41
English
3. When the correct channel frequency is entered, select [Done], then press OK.
4. Select [Store as new channel], then press
OK to store the new TV channel.
Install digital and satellite channels
Install digital channels
To improve TV reception, reposition the
antenna. You need to know the correct
frequency to tune. For best results, contact
the service provider or get a professional
installer.
1. Press . 2. Select [Setup] > [Channel settings] >
[Channel...](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-40.png "Page 41
EN 41
English
3. When the correct channel frequency is entered, select [Done], then press OK.
4. Select [Store as new channel], then press
OK to store the new TV channel.
Install digital and satellite channels
Install digital channels
To improve TV reception, reposition the
antenna. You need to know the correct
frequency to tune. For best results, contact
the service provider or get a professional
installer.
1. Press . 2. Select [Setup] > [Channel settings] >
[Channel...")
EN 41 English 3. When the correct channel frequency is entered, select [Done], then press OK. 4. Select [Store as new channel], then press OK to store the new TV channel. Install digital and satellite channels Install digital channels To improve TV reception, reposition the antenna. You need to know the correct frequency to tune. For best results, contact the service provider or get a professional installer. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel...
Page 42
![Page 42
EN 42
An onscreen message will notify you if the
channel list cannot be copied to the second
TV.
Note: If you are prompted to enter a code,
enter 8888.
Copy channel list to USB
1. Connect a USB storage device to the TV
with the channels installed on it.
2. Press .
3. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to USB], then press OK. The channel
list is copied to the USB storage device.
4. Unplug the USB storage device.
Copy channel list to...](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-41.png "Page 42
EN 42
An onscreen message will notify you if the
channel list cannot be copied to the second
TV.
Note: If you are prompted to enter a code,
enter 8888.
Copy channel list to USB
1. Connect a USB storage device to the TV
with the channels installed on it.
2. Press .
3. Select [Setup] > [TV settings] >
[Preferences] > [Channel list copy] >
[Copy to USB], then press OK. The channel
list is copied to the USB storage device.
4. Unplug the USB storage device.
Copy channel list to...")
EN 42 An onscreen message will notify you if the channel list cannot be copied to the second TV. Note: If you are prompted to enter a code, enter 8888. Copy channel list to USB 1. Connect a USB storage device to the TV with the channels installed on it. 2. Press . 3. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to USB], then press OK. The channel list is copied to the USB storage device. 4. Unplug the USB storage device. Copy channel list to...
Page 43
![Page 43
EN 43
English
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press OPTIONS.
2. Press one of the following buttons to
select an option:
Red: Switch hearing impaired on or off.
Green: Switch on hearing impaired
audio and subtitles.
3. Press to exit.
Visually impaired
Tip: To verify whether visually impaired
audio is available, press OPTIONS and
select [Audio language]. Languages with an
eye icon support visually impaired audio.
To switch on...](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-42.png "Page 43
EN 43
English
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press OPTIONS.
2. Press one of the following buttons to
select an option:
Red: Switch hearing impaired on or off.
Green: Switch on hearing impaired
audio and subtitles.
3. Press to exit.
Visually impaired
Tip: To verify whether visually impaired
audio is available, press OPTIONS and
select [Audio language]. Languages with an
eye icon support visually impaired audio.
To switch on...")
EN 43 English To switch on hearing impaired audio and subtitles 1. While you watch TV, press OPTIONS. 2. Press one of the following buttons to select an option: Red: Switch hearing impaired on or off. Green: Switch on hearing impaired audio and subtitles. 3. Press to exit. Visually impaired Tip: To verify whether visually impaired audio is available, press OPTIONS and select [Audio language]. Languages with an eye icon support visually impaired audio. To switch on...
Page 44
![Page 44
EN 44
For more information, see the following
pages.
Update with USB
Before performing this procedure, make sure
that you have the following:
Spare time to complete the entire
update.
A USB flash drive that has at least
256MB of storage space, is FAT or
DOS formatted, and has its write
protection disabled.
Access to a computer with a USB port
and internet access.
Note: Do not use a USB hard drive.
1. Press . 2. Select [Setup] > [Update software], then
press OK....](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-43.png "Page 44
EN 44
For more information, see the following
pages.
Update with USB
Before performing this procedure, make sure
that you have the following:
Spare time to complete the entire
update.
A USB flash drive that has at least
256MB of storage space, is FAT or
DOS formatted, and has its write
protection disabled.
Access to a computer with a USB port
and internet access.
Note: Do not use a USB hard drive.
1. Press . 2. Select [Setup] > [Update software], then
press OK....")
EN 44 For more information, see the following pages. Update with USB Before performing this procedure, make sure that you have the following: Spare time to complete the entire update. A USB flash drive that has at least 256MB of storage space, is FAT or DOS formatted, and has its write protection disabled. Access to a computer with a USB port and internet access. Note: Do not use a USB hard drive. 1. Press . 2. Select [Setup] > [Update software], then press OK....
Page 45
![Page 45
EN 45
English
Update [Help]
Do not switch off the TV or remove
the USB storage device during the
update.
If a power failure occurs during the
update, do not remove the USB
storage device from the TV. The TV
continues to update as soon as power
is restored.
If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Disconnect all other USB devices from the
TV.
3. Connect the USB storage...](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-44.png "Page 45
EN 45
English
Update [Help]
Do not switch off the TV or remove
the USB storage device during the
update.
If a power failure occurs during the
update, do not remove the USB
storage device from the TV. The TV
continues to update as soon as power
is restored.
If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Disconnect all other USB devices from the
TV.
3. Connect the USB storage...")
EN 45 English Update [Help] Do not switch off the TV or remove the USB storage device during the update. If a power failure occurs during the update, do not remove the USB storage device from the TV. The TV continues to update as soon as power is restored. If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care. 1. Switch on the TV. 2. Disconnect all other USB devices from the TV. 3. Connect the USB storage...
Page 46
EN 46 5 Connect your TV About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. The connections shown in this user manual are recommendations only. Other solutions are possible. Tip: If your device only has composite or RCA connectors, use a SCART-cinch adapter to connect...
Page 47
![Page 47
EN 47
English
SCART
A SCART cable combines video and audio
signals.
SCART connectors can handle RGB video
signals but cannot handle high-definition
(HD) TV signals.
VGA
Use this connection to display PC content
on the TV.
For video and sound, use the VGA and
AUDIO IN connectors.
Connect devices
Overview
You can connect your devices to the TV with any of the following options. After connection, press > [Add your devices].](http://img.usermanuals.tech/thumb/59/54282/w300_philips_32pdl7906t-user-manual-46.png "Page 47
EN 47
English
SCART
A SCART cable combines video and audio
signals.
SCART connectors can handle RGB video
signals but cannot handle high-definition
(HD) TV signals.
VGA
Use this connection to display PC content
on the TV.
For video and sound, use the VGA and
AUDIO IN connectors.
Connect devices
Overview
You can connect your devices to the TV with any of the following options. After connection, press > [Add your devices].")
EN 47
English
SCART
A SCART cable combines video and audio
signals.
SCART connectors can handle RGB video
signals but cannot handle high-definition
(HD) TV signals.
VGA
Use this connection to display PC content
on the TV.
For video and sound, use the VGA and
AUDIO IN connectors.
Connect devices
Overview
You can connect your devices to the TV with any of the following options. After connection, press > [Add your devices].
Page 48
EN 48
Blu-ray or DVD disc player
Connect the disc player with an HDMI cable to the TV.
Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV.
TV receiver
Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on
certain models only.)
Page 49
EN 49
English
Connect the satellite or digital TV receiver with an HDMI cable to the TV.
Connect the satellite or digital TV receiver with a SCART cable to the TV.
Connect the satellite or digital TV receiver with a component cable (Y Pb Pr) and an audio L/R
cable to the TV.
Page 50
EN 50 Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Game console The most practical connectors for a game console are on the side of the TV. However, you can also use the connectors at the back of the TV. For the best gaming experience, set the TV to game mode. 1. Press...