Philips 300wn5db User Manual

							
On Screen Display
Note: In AP/China models, Simplified Chinese is 
supported. 
 
SPECIAL 
FEATURES Activate special control features:
 
EXIT: Exit from this menu.
SLEEP TIMER: Slide bar to select off/15/30/60/90/120/150/180.
OSD LOCK: Show key icon after selecting lock.
LIGHT SENSOR: Push the 
  buttons to toggle Light Sensor 
function. 
VIDEO MODE: Set the screen scaling mode to suit personal 
preference:
l     STANDARD MODE
l     4:3
l     FULL SCREEN
l     NONLINEAR SCALING
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (19\
 of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
PARENTAL 
CONTROLS 
1) When users first enter the PARENTAL CONTROL, the screen will show th\
e 
window asking user key in the code.
 
2) Users will see the window Access code when they enter this foundat\
ion. 
l     EXIT
l     LOCK
l     CHANGE CODE
l     CLEAR ALL
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (20\
 of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
3) Enter Master code 0711 twice or the code entered in step 1.
SETUP
SYSTEM:  
NOTE: The SYSTEM item is only available in Western 
Europe model.
CHANNEL SEARCH: 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (21\
 of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
MANUAL STORE:  
CHANNEL SKIP:
CHANNEL SWAP: 
FACTORY 
RESET Reset the setting to default values.
NO: Keep the setting as current.
YES: Load factory setting 
 
RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (22\
 of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
 
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (23\
 of 23)2005-02-16 10:33:16 AM 
						

							
Remote Control
Remote Control
On Screen Display • Using Your Remote Control
Using Your Remote Control
For Europe and most of Asia Pacific countries
For Europe and most of Asia Pacific countries
Remote Control Diagram 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (\
1 of 4)2005-02-16 10:33:20 AM 
						

							
Remote Control
 1 Standby To set the TV temporarily to standby mode. To switch 
on the TV set, press Programme button (p -, +), any 
digit between 0 and 9 or AV source button
(The amber light indicates when set is in standby mode)
2 AV source
l     To select TV/Video sources in PIP mode and TV 
mode
l     If using TV STANDBY, press this button to 
return to ON
3 Surround sound ON/
OFF
Turn on/off virtual surround sound.
4 PIP On/Off, Size To activate or close the Picture in Picture function in 
PC mode and to enlarge or reduce the PIP window size 
using the same button. 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (\
2 of 4)2005-02-16 10:33:20 AM 
						

							
Remote Control
5PIP Shift To change Picture in Picture window position in PC 
mode
6 Mute
To disable sound. To restore sound, press button again.
7 Volume/Cursor 
control  1. Volume level up/down 
2. cursor left/right
(When in menu) 
8 Menu To turn on or off the OSD (On-Screen Display).
To select function in OSD.
9 Smart sound 
controls To access a series of settings: VOICE, MUSIC, 
THEATRE and PERSONAL
10 Numerical keys
l     For direct access to programmes
For a 2-digit programme number, the 2nd digit 
must be entered before the dash disappears.
l     If using TV STANDBY, press any of number 
keys to return to ON  
11 Teletext features Works only in areas where the Teletext service is 
available
12 Smart picture 
controls To select your desired picture setting from 5 settings: 
MOVIES, SPORTS, WEAK SIGNAL, MULTIMEDIA and 
PERSONAL.
13 TV programmes
/Cursor control 1. To move up or down a programme.
The number and the sound mode are displayed for a 
few seconds. 
2. Cursor up/down, when in menu. 
14 PC/TV mode 
selection
To select PC or TV mode.
15 Previous programme
To access the last programme viewed.
16 Sleep timer To select the period of time after which the set will 
switch automatically to standby mode (up to 180 
minutes)
17 OSD
To show OSD status. 
18 Mode
Screen format 4:3, 16:9, non-linear, or automatic.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (\
3 of 4)2005-02-16 10:33:20 AM 
						

							
Remote Control
19Sound mode
l     To switch from STEREO to MONO or to choose 
between Dual I and Dual II for bilingual 
transmissions.
For TV sets fitted with NICAM reception, 
depending on the transmission, you can switch 
from NICAM STEREO to MONO or choose 
between NICAM DUAL I, NICAM DUAL II and 
MONO. 
l     If using Teletext, press this button to display dual 
pages on screen.
20 TXT Enlarge
Enlarge teletext context to two times larger.
21 TXT Reveal
Reveal or conceal hidden content in teletext.
22 TXT ON/OFF
Teletext ON or OFF.
23 TXT OSD/Index
Calling out teletext index page.
24 TXT Hold
Freeze teletext, no refresh.
25 TXT Mix Teletext background become transparent, content 
mixes with images.
The Teletext related color buttons (#11) and the above six buttons (#\
20 ~ 25) are functionless in monitor, video 
models, and non PAL system TV.
RETURN TO TOP OF THE PAGE
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (\
4 of 4)2005-02-16 10:33:20 AM 
						

							
Customer Care and Warranty
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR 
WARRANTY COVERAGE
WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • 
Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • 
Switzerland • Spain • United Kingdom 
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Slovakia • Slovenia • 
Turkey
LATIN AMERICA: Antilles • Argentina • Brasil • Chile • Colombia • Mexico • Paraguay • 
Peru • Uruguay • Venezuela
NORTH AMERICA: Canada • USA
PACIFIC: Australia • New Zealand
ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia • 
Pakistan • Philippines • Singapore • Taiwan • Thailand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt
  
file:///D|/My%20Documents/dfu/300WN5/english/warranty/warranty.htm2005-0\
2-16 10:33:23 AM