Philips 300wn5db User Manual

							
Installing your LCD Monitor/TV
1Audio (L) Audio (L) for component video
2 Audio (R) Audio (R) for component video
3 Component Video Component video Y/Pb/Pr input
4 Composite Video Composite video CVBS input
5 Audio (L) Audio (L) for CVBS and S-Video
6 Audio (R) Audio (R) for CVBS and S-Video
7 S-Video S-Video input
 
RETURN TO TOP OF THE PAGE 
 Optimising Performance
l     For best performance, ensure that your display settings are set at 1280x\
768, 60Hz.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM \
(7 of 8)2005-02-16 10:33:11 AM 
						

							
Installing your LCD Monitor/TV
 
Note: You can check the current display settings by pressing the MENU button\
 
once. 
l     You can also install the Flat Panel Adjust (FP Adjust) program, a prog\
ram for getting the best performance out of your monitor. 
This is included on this CD. Step-by-step instructions are provided to g\
uide you through the installation process. Click on the 
link to find out more about this program. 
More about 
 FP_setup04.exe
 
RETURN TO TOP OF THE PAGE 
 
 
  
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/INSTALL.HTM \
(8 of 8)2005-02-16 10:33:11 AM 
						

							
On Screen Display
On Screen Display
On Screen Display Control • Using Your Remote Control
On Screen Display Controls
An overall view of the On-Screen Display (OSD) structure is shown belo\
w.  You can use it as a reference 
for further adjusting your Monitor/TV.
There are three different modes of OSD available for different models:
l     PC Mode
l     Audio/Video Mode 
l     TV Mode
PC Mode
AMain Menu B
Sub-Menu name C
Menu icon
1.  With the menu off, push the MENU button to enter OSD system and display \
the main menu.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (1 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
2.  Push the  and  buttons to move between the function icons. As you move from one icon t\
o 
another, the function name will be highlighted. 
3.  Push the MENU button once to activate the highlighted function. Push 
 /  to select the 
preferred parameter, push the 
 button to enter the selected one, then use the  and  
buttons making your changes. 
4.  Push the 
 button to return the main menu or select another function. 
. 
Icon Menu Name 
and Sub-menus Description
EXIT
This is used to exit out of the Main menu.
INPUT 
SELECTSelect video source for main display:
l     PC ANALOG: PC VGA input
l     PC DIGITAL: PC DIGITAL input
l     TV TUNER: Antenna or cable TV input
l     EXT: Scart input
l     COMPOSITE: Composite video input
l     S-VIDEO: S-video input
l     COMPONENT: Component video input
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (2 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
BRIGHTNESS/
CONTRASTThe Brightness function :
Push the 
 button to increase luminance; 
push the 
 button to decrease luminance (min 0 ~ max. 100).
The Contrast function :
Push the 
 button to increase the contrast; 
push the 
 button to decrease the contrast (min 0 ~ max. 100). 
 
The Light Sensor function:
Push the 
  buttons to toggle Light Sensor function. 
This function automatically finetunes the brightness of the monitor acco\
rding 
to the environment.
Select your preferred function.
EXIT: Exit this menu
TREBLE: Adjustable from 0 to 100
BASS: Adjustable from 0 to 100
BALANCE: Adjustable from 0 to 100
VOLUME: Adjustable from 0 to 100
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (3 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
AUDIO
SURROUND: ON/OFF
MUTE: ON/OFF
AUDIO SOURCE: Only in PC TV/VIDEO mode
POWER SAVING:ON/OFF
SIZE & 
POSITIONPositioning moves the viewing area around on the monitor screen. 
EXIT: Exit this menu 
H.POSITION /V.POSITION: When making changes to either the Horizontal 
or Vertical settings, the image will simply be shifted in response to \
your 
selection/change. 
Minimum is 0 (
). Maximum is 100 ().
4:3 ASPECT RATIO: Select 4:3 image display
FULL SCREEN: Select full screen (16:9) image display
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (4 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
NOTE:
1. When operating in DVI mode, the positioning adjustments are 
not available.
2. The 4:3 Aspect Ratio and Full Screen items are not available 
in WXGA 1280x768 modes.
IMAGING 
SETTINGS
 To adjust the image settings.
EXIT: Exit this menu
AUTO ADJUST:Press to select automatic adjustment . 
PHASE :Use the 
 and  buttons to adjust from 0 to 100. 
PIXEL CLOCK:Use the 
 and  buttons to adjust from 0 to 100.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (5 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
Note: Operating in DVI mode, the Pixel Clock and Phase 
adjustments are not available.
 
COLOR 
SETTINGSColor Settings adjusts the color temperature.
EXIT: Exit this menu
NATURE COLOR: Equivalent to original panel color.
NORMAL COLOR: 6500K (Same as sRGB) default from FACTORY
BLUE PRESET: Equivalent to 9300K
RED PRESET: Equivalent to 5700K
USER PRESET: Adjust red, green, blue three colors from 0 to 100.
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (6 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
 
 
 OSD 
SETTINGS
 
   Each time the OSD opens, it displays in the same location on the screen.\
 
OSD Settings (horizontal/vertical) provides control over this locati\
on.
EXIT: Exit this menu
HORIZONTAL: Adjustable from 0 to 100.
VERTICAL: Adjustable from 0 to 100.
OSD HOLD TIME: The OSD stays active for as long as it is in use. The 
range of time setting is from 5 to 60 seconds.
OSD LOCK: Controls user access to adjustments. Show key icon after 
selecting lock. 
 
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (7 \
of 23)2005-02-16 10:33:16 AM 
						

							
On Screen Display
Note: 
When the OSD is locked, press menu button on the 
monitor, and the OSD LOCK menu will appear. Press (+) to 
unlock and allow user access to all applicable settings.
LANGUAGELanguage sets the OSD to display in one of the five or six languages 
provided. That is, English, Spanish, French, German, Italian (not avail\
able in 
NAFTA model) and Simplified Chinese (China models only).
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (8 \
of 23)2005-02-16 10:33:16 AM