Philips 273e3lhsb User Manual

EN User manual  1
Customer care and warranty 30
Troubleshooting & FAQs 35
273E3L
www.philips.com/welcome
 

Table of Contents
1 Important ............................................................1
1.1 Safety precautions and maintenance ..................1
1.2 Notational Descriptions ............................................2
1.3 Disposal of product and packing mater ial.......3
2 Setting up the monitor .....................................4
2.1 Installation ........................................................................\
..4
2.2 Operating the monitor...

1
1. Important
This electronic user’s guide is intended for anyone 
who uses the Philips monitor. Take time to read 
this user manual before you use your monitor. 
It contains impor tant information and notes 
regarding operating your monitor.
The Philips guarantee applies provided the 
product is handled properly for its intended use, 
in accordance with its operating instructions and 
upon presentation of the original invoice or cash 
receipt, indicating the date of purchase, dealer’s 
name and model...

2
•	IMPORTANT: Always activate a moving screen 
saver program when you leave your monitor 
unattended. Always activate a periodic screen 
refresh application if your monitor will display 
unchanging static content. Uninterrupted 
display of still or static images over an 
extended period may cause “burn in”, also 
known as “after-imaging” or “ghost imaging”, 
on your screen. 
"Burn-in", "after-imaging", or "ghost imaging" 
is a well-known phenomenon in LCD panel 
technology. In...

3
1.3 Disposal of product and packing material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its packaging 
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic 
appliances, this product may not be disposed 
of with normal household waste. You are 
responsible for disposal of this equipment through 
a designated waste electrical and electronic 
equipment collection. To determine the locations 
for dropping off such waste...

4
2.1 Installation
273E3L/273E3LH
 Package contents
2. Setting up the monitor
Register your product and get suppor t atwww.philips.com/welcome273E3L
Quick
Star t
VGA (optional) 
DVI (optional)
2011 Koninklijke Philips Electronics, N.V. All rights reserved. Unauthorized duplication is a violation of applicable laws. Made and printed in China. Version M3273ELE1T Q70G27C1813 3A Monitor drivers Quick Start Guide
SmartControl software
Audio cable (optional)   
 Install base sta nd
273E3L/273E3LH
1 . Place the...

5
 Connecting to your PC
5
5
66
 AC power input
 VGA input
 DVI-D input(Available for selected models)
 Kensington anti-thief lock
 HDMI input(A vailable for selected 
models) 
 Audio in input(A vailable for selected 
models)
Connect to PC
1 . Connect the power cord to the back of 
the monitor firmly.
2 . Turn off your computer and unplug its 
power cable.
3 . Connect the monitor signal cable to the 
video connector on the back of your 
computer.
4 . Plug the power cord of your computer 
and your monitor...

6
 Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips 
LCD monitors. It allows an end user to adjust 
screen performance or select functions of the 
monitors directly through an on-screen instruction 
window. A user friendly on screen display interface 
is shown as below:

Basic and simple instruction on the control keys
In the OSD shown above users can press  
buttons at the front bezel of the monitor to move 
the cursor, OK...

7
 Resolution notification
This monitor is designed for optimal performance 
at its native resolution, 1920×1080@60Hz. 
When the monitor is powered on at a different 
resolution, an aler t is displayed on screen: Use 
1920×1080@60Hz for best results.
Display of the native resolution aler t can be 
switched off from Setup in the OSD (On Screen 
Display) menu.
 Physical Function
Tilt
2.3 Remove Base Stand and Base
 Remove the Base Stand
Before you star t disassembling the monitor base, 
please follow the...

8
 Remove the base
Condition:
•	 For	VESA	 standard 	 mounting 	 applications
1. Remove the 3 screw covers.
2. Remove the 3 screws and then remove the 
base from the monitor.
 Note
This monitor accepts a 100mm x 100mm VESA-
Compliant mounting interface.
100mm
100mm

2. Setting up the monitor