Philips 26hfl3381d User Manual

38EN  
 
 
  Set TV speakers to EasyLink mode
When enabled, this feature automatically 
turns off TV speakers when content from an 
EasyLink-compliant home theatre system is 
played. Audio is played only from the home 
theatre system’s speakers.
1When watching content from an EasyLink 
device, press  OPTIONS.
The options menu appears. »
2Press the Navigation buttons to select 
[TV speakers].
The  »[TV speakers] menu appears.
3Press the Navigation buttons to select 
[Automatic (EasyLink)].
4Press OKThe TV...

39EN    
 
 
 
 
 
  
 
 Multimedia
Supported storage device: USB (FAT or DOS-formatted; Mass Storage Class 
compliant only) Images: JPEGAudio: MP3, LPCMVideo: MPEG1, MPEG2, H.264/MPEG-4 AVCNotecharacters. 
Tuner/Reception/
Transmission
Antenna input: 75ohm coaxial (IEC75)TV system: DVB COFDM 2K/8KVideo playback: NTSC, SECAM, PALDVB-T (Digital Video Broadcasting-Terrestrial) and DVB-C (Digital Video 
Broadcasting-Cable). See listed countries 
on the back of the TV
Remote control
Type:...

40EN  
 
 
 
 
 
 
 
 EPG information
8 days EPG is only available in some countriesCountry8 days EPG
UKYes
FranceNo
FinlandYes
SwedenYes
DenmarkYes
NorwayYes
SpainYes
GermanyYes
ItalyYes
GreeceNo
NetherlandsYes
Czech RepublicYes
BelgiumNo
AustriaYes
SwitzerlandYes
EstoniaYes
LithuaniaYes
CroatiaNo
HungaryNo
IrelandNo
LuxemburgNo
PolandNo
PortugalNo
RussiaNo
SlovakiaNo
SloveniaNo
RomaniaNo
SerbiaNo
LatviaNo
UkraineNo
BulgariaNo
KazakhstanNoSupported TV mounts
To mount the TV, purchase a Philips TV mount...

41EN  
  The TV menu is in the wrong language.
Change the TV menu to your preferred language (see ‘Change language settings’ 
on page 12).
When turning the TV on/off/to standby, you 
hear a creaking sound from the TV chassis:
No action is required. The creaking sound is normal expansion and contraction of 
the TV as it cools down and warms up. 
This does not impact performance.
When the TV is in standby mode, a startup 
splash screen is displayed, then returns to 
standby mode.
This is normal behavior....

42EN 
 
 
 
 
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 Sound issues
There is a picture but sound quality is poor:Note
If no audio signal is detected, the TV automatically switches the audio output off 
— this does not indicate malfunction.
Check that all cables are properly connected.
Check that the volume is not set to 0.Check that the sound is not muted.Check that the TV speakers setting is on in the sound menu.
Check that the TV audio output is connected to the audio input on the 
HDMI CEC...

43EN  
 
 
 
 
 
 
 
 
 
  
 
 
 
  Contact us
If you cannot resolve your problem, refer to 
the FAQs for this TV at www.philips.com/support. 
  
If the problem remains unresolved, contact 
Philips Consumer Care in your country as 
listed in this user manual.Warning
Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to 
your TV or void your warranty.Note
Make a note of your TV model and serial number before you contact Philips. These 
numbers are printed on the...

39
44ENF
factory settings 20
H
HDMI
HDMI-CEC in 29
Troubleshooting 42
 
I
Installation
Automatic 21
Manual 22
K
Kensington lock 38
L
Language
Audio language 13
menu language 21
subtitle language 16
Troubleshooting 42
Lock
Kensington lock 38
Local KB lock 28
 
M
MENU
Main menu 10
Troubleshooting 41
 
Multimedia41
USB 17
 
Music 18
O
One-touch play 37
One-touch standby 37Index
 
 
  B
Batteries
  C
Channel list
install
Automatic
 21
Manual
 22
  Test digital reception
 23
Troubleshooting
 41
Update
 22...

Auto USB
BDS mode
45ENP
Photo
Slide show 17
USB 17
Picture format 12
Picture settings 10
POWER 8
 
Power on 28
 39
Professional mode
Activat 25
Options 27
 28
Settings 28
R
Remote control
Professional Setup Remote control 24
RC lock 2839
Troubleshooting 41
S
 
Smart card 36
Smart settings 12
Software version 18
Sound settings 12
Subtitles
On analogue channels 15
On digital channels 16
 
T39
Teletext 9, 13
Troubleshooting 41
TV overview 6U
USB
Listen to music 18
 29
View photos 17
V
Video formats 39
Volum...