Philips 26hfl3381d User Manual

[Switch on channel]
[Switch on volume]
28ENBDSsettings
[BDS mode]
Enables / disables the Professional mode.  
[On]: All settings in the Professional 
mode Setup menu are in effect.
[Off]: The TV operates as a normal 
(consumer) TV.
 
 
 
 
  [Maximum volume]volume level of the TV.  [Local KB lock]
[Off]: The TV local buttons
VOLUME+/-, P/CH +/- and SOURCE
will function normally.
[On]: The TV local buttons VOLUME 
+/-, P/CH +/- and SOURCE are 
locked.
[RC lock]
Disables the operation of the Guest remote...

¬» É»´½±³» ³»­­¿¹» ø«­·²¹ Ó«´¬·óÌ¿¾÷ò µ»§­ ð ó ç ±² ¬¸» ®»³±¬» ½±²¬®±´ ¬± ½±³°±­»
in the Home screen will show. When On, the  [On]: in the Home screen will not show.  Enables or disables USB content browse feature in  [Welcome message]
29 EN  
 
   
 
  
   The Welcome message function allows the TV 
to show a customized greeting to the hotel 
guest whenever the TV is switched on.  This 
helps to personalize the hotel experience for 
guests.  The Welcome message can consist 
of 2 lines of text, with each...

30EN  
 
 
 
  
  [Store Settings]
[TV to Smartloader] [Smartloader to TV]video,  audio,  channel Table, and Professional 
mode settings) from a Smartloader / USB device 
to the TV set.video, audio, channel Table, and Professional mode 
settings) from the TV set to a Smartloader /USB 
device. Selects  to store Professional mode 
settings. 

31EN  
 
 
   
 
31EN  
 
 
   
 
 
 
 
 
 
 Back connectorsNote
Back connectors on 19-22” models vary   slightly from the diagram.
The number of HDMI connectors available   varies according to TV model.ÛÈÌ îøÎÙÞñÝÊÞÍ÷ÛÈÌ ïøÎÙÞñÝÊÞÍ÷ÍÐÜ×ÚÑËÌßËÜ×Ñ
ÊÙß
ÌÊ ßÒÌÛÒÒß
ØÜÓ× íßËÜ×Ñ ×ÒæÔÛÚÌ ñ Î×ÙØÌØÜÓ× ï ñ ÜÊ×ØÜÓ× î ñ ÜÊ×ØÜÓ× í ñ ÜÊ×ÊÙß
ÛÈÌ íØÜÓ× îØÜÓ× ï
ÑËÌ
8 Connect devices
For best picture quality, we recommend you 
use the following connection types, listed below 
from highest to basic quality:
1 HDMI
2 Y Pb...

32EN 
 
  
 
  
  
  
  
   
   
 
  
 
  
 dVGA
Video input from a computer.
eAUDIO IN
Audio input from devices that require 
a separate audio connection, such as a 
computer.
fEXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.ÊÙß
ÊÙß
ßËÜ×Ñ ×ÒæÔÛÚÌ ñ Î×ÙØÌØÜÓ× ï ñ ÜÊ×ØÜÓ× î ñ ÜÊ×ØÜÓ× í ñ ÜÊ×ÊÙß
ÛÈÌ íaEXT 1/EXT 2 (SCART)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game...

Side connectors
Refer to the correct connector diagram for 
your TV screen size:
aAUDIO IN L/R
Audio input from analogue devices 
connected to VIDEO or S-VIDEO.gHDMI 1/2/3
Digital audio and video input from high-players.Note
Only one HDMI connector is available on 19/22” models. The HDMI connector on these 
models is labelled as HDMI instead of HDMI 1.
hTV ANTENNA
Signal input from an antenna, cable or satellite.ÌÊ ßÒÌÛÒÒß31EN33EN 

34EN 
   
 gHDMI
Digital audio and video input from high-players.
hSERV. U
For use by service personnel only.
Connect a computer
Before you connect a computer to the TV:
Set the screen refresh rate on your computer to 60Hz.
Select a supported screen resolution on your computer.
Enable [PC mode] in the [Picture]menu 
(see ‘Manually adjust picture settings’ on 
page 15), and set the picture format to 
[Unscaled].
  
Connect a computer with one of the 
following connectors:Note
Connections via DVI or VGA...

35EN  
 
   
 
 HDMI cable and HDMI-DVI adaptor 
(side HDMI and AUDIO IN L/R)VGA cable
Use a Conditional Access 
Module
A Conditional Access Module (CAM) is 
provided by digital TV service operators to 
decode digital TV channels.Note
If required, refer to documentation from your operator on how to insert a smart card into 
the Conditional Access Module.ÜÊ×
ÊÙß
ÊÙß
ßËÜ×Ñ ×ÒæÔÛÚÌ ñ Î×ÙØÌØÜÓ× ï ñ ÜÊ×ØÜÓ× î ñ ÜÊ×ØÜÓ× í ñ ÜÊ×ÊÙß
DVI-HDMI cable (rear HDMI and 
AUDIO IN)DVI-HDMI cable (side HDMI and 
AUDIO IN...

36EN  
  
 Assign a channel decoder
Before using a SCART digital channel decoder, 
select the channel to decode and assign the 
decoder to EXT 1 or EXT 2.
1While watching TV, press  (Home).
The home menu appears. »
2Press the Navigation buttons to select 
[Setup].
3Press OK.
The  »[Setup] menu appears.
4Press the Navigation buttons to select 
[Installation] > [Decoder] > [Channel].
5Press the Navigation buttons to select 
[Status], then the location of the decoder 
(eg. EXT 1 or EXT 2).
6Press OKThe...

37EN  
 
 
  
 
 EasyLink features
One-touch play 
When you connect your TV to devices that 
support one-touch play, you can control your 
TV and the devices with one remote control.
One-touch standby
When you connect your TV to devices that 
support standby, you can use your TV remote 
control to put your TV and all connected 
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI 
CEC compliant devices, your TV can 
switch automatically to play audio from the 
connected...