Philips 245p2e User Manual

							29
Power
   On mode   47W (typ.), 55W (max.) (with audio and USB x 1)
   On mode (ECO mode) (typical)    < 30.7W Energy Consumption 
(EnergyStar 5.0 test method)  AC Input Voltage at 
100VAC +/-5VAC, 
50Hz +/- 3HzAC Input Voltage at 
115VAC +/-5VAC, 
60Hz +/- 3Hz AC Input Voltage at 
230VAC +/-5VAC, 
50Hz +/ -3Hz
   Normal Operation (typical)    34.8W  34.8W  34.8W
   Sleep (typical)   0.8W  0.8W   0.8W
   Off   0.5W  0.5W   0.5W
Heat Dissipation* AC Input Voltage at 
100VAC +/-5VAC, 
50Hz +/ -3HzAC Input Voltage at 
115VAC +/-5VAC, 
60Hz +/ -3Hz AC Input Voltage at 
230VAC +/-5VAC, 
50Hz +/ -3Hz
   Normal Operation   126.3BTU   126.3BTU   126.3BTU
   Sleep (typical)   2.73BTU   2.73BTU   2.73BTU
   Off   1.7BTU  1.7BTU   1.7BTU
Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)
Power Supply Build-in, 100-240VAC, 50/60Hz
Dimension
Product with stand (WxHxD)  559 x 512 x 220mm 
Product without stand 
(WxHxD)  559 x 381 x 75mm
Box dimension (WxHxD) 670 x 270 x 456mm
Weight
Product with stand  7.61kg
Product without stand 5.41kg
Product with packaging 10.3kg
Operating Condition
Temperature range Storage: -20°C to 60°C
operation: 0°C to 40°C 
Relative humidity 20% to 80%
Altitude Non-operation: + 40,000 ft ( 12,192 m)
operation: + 12,000 ft ( 3,658 m)
MTBF   50,000 hrs 
 
						

							30
Environmental
ROHS YES
EPEAT Silver (www.epeat.net)
Packaging 100% recyclable
Compliance and standards
Regulator y Approvals CE Mark, Energy Star 5.0, FCC Class B, SEMKO, TCO5.0, TÜV/ GS, TÜV Ergo, UL/cUL
Cabinet
Color Black/Silver, Black/Black
Finish Texture
  Note
1. EPEAT Silver is valid only where Philips registers the product. Please visit www.epeat.net for 
registration status in your countr y.
2.  This data is subject to change without notice. Go to www.philips.com/suppor t to download the latest  version of leaflet.
 
						

							31
4.2 Automatic PowerSaving
If you have VESA DPM compliance display card 
or software installed in y
our PC, the monitor can 
automatically reduce its power consumption when 
not in use. If an input from a keyboard, mouse or 
other input device is detected, the monitor will 
wake up automatically. The following table shows 
the power consumption and signaling of this 
automatic power saving feature:
 
4.1  Resolution & Preset Modes
 Maximum Resolution
For  245P2
1920 x 1200 at 60 Hz (analog input) 
1920 x 1200 at 60 Hz (digital input)
 Recommended Resolution
For  245P2
1920 x 1200 at 60 Hz (digital input)
H. freq (kHz) Resolution V. freq (Hz)
31.469 720x400 70.087
31.469 640x480 59.940
35.000 640x480 67.000
37.500 640x480 75.000
35.156 800x600 56.250
37.879 800x600 60.317
46.875 800x600 75.000
48.363 1024x768 60.004
60.023 1024x768 75.029
63.981 1280x1024 60.020
79.976 1280x1024 75.025
65.290 1680x1050 60.000
64.674 1680x1050 60.000
74.560 1920x1200 60.000
74.520 1920x1200 60.000
Power Management DefinitionVESA 
Mode  Video  H-sync  V-sync  Power Used LED color 
Active ON  Yes Yes 47W (typ.) 55W (max.)(with audio 
and USB x 1) White 
Sleep (typ.) OFF No No 0.1W White  (Blinking)
Switch Off OFF - - OFF OFF
  Note
This data is subject to change without notice.
The following setup is used to measure power 
consumption on this monitor

.
Native resolution: 1920x1200.
Contrast: 50%
Brightness: 300 nits
Color temperature: 6500k with full white pattern
Audio and USB Inactive (Off)
 
						

							32
5. Regulatory Information
Lead-free Product
Lead free display promotes 
environmentally sound recover y and 
disposal of waste from electrical and 
electronic equipment. Toxic substances 
like Lead has been eliminated and compliance 
with European community’s stringent RoHs 
directive mandating restrictions on hazardous 
substances in electrical and electronic equipment 
have been adhered to in order to make Philips 
monitors safe to use throughout its life cycle.
TCO Displays 5.0 Information
Congratulations, 
Your display is designed for 
both you and the planet!
This display carries the TCO 
Cer tified label. This ensures 
that the display is designed 
for minimal impact on the climate and natural 
environment, while offering all the performance 
expected from top of the line electronic 
products. TCO Cer tified is a third par ty verified 
program, where ever y product model is tested 
by an accredited independent test laborator y. 
TCO Cer tified represents one of the toughest 
cer tifications for displays worldwide.
Some of the Usability features of the TCO 
Displays 5.0 requirements:
Visual Ergonomics
Good visual ergonomics in order to improve the 
working environment for the user and to reduce 
sight and strain problems. Impor tant parameters 
are:
•   Light levels without color tint, Uniform color  and luminance, Wide color gamut 
•   Calibrated color temperature and gamma cur ve 
•   Wide luminance level, Dark black levels, Low 
motion blur 
Electrical Safety
•   Product fulfills rigorous safety standards 
Emissions
•   Low alternating electric and magnetic fields 
emissions 
•   Low acoustic noise emissions 
  Some of the Environmental features of the TCO 
Displays 5.0 requirements: 
•   The brand owner demonstrates corporate 
social responsibility and has a cer tified 
environmental management system (EMAS or 
ISO 14001) 
•   Ver y low energy consumption both in on- and 
standby mode 
•   Restrictions on chlorinated and brominated 
flame retardants, plasticizer and polymers 
•   Restrictions on heavy metals such as cadmium, 
mercur y and lead (RoHS compliance)
EPEAT 
(www.epeat.net)
“The EPEAT (Electronic Product 
Environmental Assessment Tool) 
program evaluates computer 
desktops, laptops, and monitors 
based on 51 environmental criteria 
developed through an extensive stakeholder 
consensus process suppor ted by US EPA.
EPEAT system helps purchasers in the public 
and private sectors evaluate, compare and select 
desktop computers, notebooks and monitors 
based on their environmental attributes. EPEAT 
also provides a clear and consistent set of 
performance criteria for the design of products, 
and provides an oppor tunity for manufacturers to 
secure market recognition for effor ts to reduce 
the environmental impact of its products.”
 
						

							33
Benefits of EPEAT
Reduce use of primar y materials
Reduce use of toxic materials
Avoid the disposal of hazardous waste EPEAT’S 
requirement that all registered products meet 
ENERGY STAR’s energy efficiency specifications, 
means that these products will consume less 
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following 
standards 
•  
EN60950-1:2006 (Safety requirement of 
Information Technology  Equipment) 
•   EN55022:2006 (Radio Disturbance 
requirement of Information Technology 
Equipment) 
•   EN55024:1998+A1:2001+A2:2003 (Immunity 
requirement of Information Technology 
Equipment) 
•   EN61000-3-2:2006 (Limits for Harmonic 
Current Emission) 
•   EN61000-3-3:1995+A1:2001+A2:2005 
(Limitation of Voltage Fluctuation and Flicker) 
following provisions of directives applicable
•   2006/95/EC (Low Voltage Directive) 
•   2004/108/EC (EMC Directive) 
•   2005/32/EC (EuP Directive, EC No. 1275/2008 
mplementing Directive for Standby and Off 
mode power consumption) and is produced 
by a manufacturing organization on ISO9000 
level. 
   The product also comply with the following 
standards 
•   ISO9241-307:2008 (Ergonomic requirement, 
Analysis and compliance test methods for 
electronic visual displays)  
•   GS EK1-2000:2009 (GS mark requirement)  
•   prEN50279:1998 (Low Frequency Electric and 
Magnetic fields for Visual Display) 
•   MPR-II (MPR:1990:8/1990:10 Low Frequency 
Electric and Magnetic fields) 
•   TCO Displays 5.0 (Requirement for 
Environment Labeling of Ergonomics, 
Energy,  Ecology and Emission, TCO: Swedish 
Confederation of Professional Employees) for 
TCO versions  Energy Star Declaration
(www.energystar.gov)
This monitor is equipped with a function for saving 
energy which suppor ts the VESA Display Power 
Management (DPM) standard. This means that the 
monitor must be connected to a computer which 
suppor ts VESA DPM. Time settings are adjusted 
from the system unit by software.
VESA State LED Indicator Power 
Consumption
Normal 
operation ON (Active) White 34.8W (typ.)
Power Saving 
Alternative 2 
One step Sleep (typ.)
Switch Off White Blinking
Off 0.8W
0.5W
As an ENERGY STAR
®
 Par tner, 
we have determined that this 
product meets the ENERGY STAR ®
 
guidelines for energy efficiency.
  Note
We recommend you switch off the monitor 
when it is not in use for a long time.
 
						

							34
Federal Communications Commission (FCC) 
Notice (U.S. Only)
  
This equipment has been tested and found 
to comply with the limits for a Class B digital 
device, pursuant to Par t 15 of the FCC 
Rules. These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This 
equipment generates, uses and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur 
in a par ticular installation. If this equipment 
does cause harmful interference to radio or 
television reception, which can be determined 
by turning the equipment off and on, the 
user is encouraged to tr y to correct the 
interference by one or more of the following 
measures:
•   Reorient or relocate the receiving antenna. 
•   Increase the separation between the 
equipment and receiver. 
•   Connect the equipment into an outlet on 
a circuit different from that to which the 
receiver is connected. 
•   Consult the dealer or an experienced radio/
TV technician for help.
  Changes or modifications not expressly 
approved by the par ty responsible for 
compliance could void the users authority to 
operate the equipment.
Use only RF shielded cable that was supplied with 
the monitor when connecting this monitor to a 
computer device. 
To prevent damage which may result in fire or 
shock hazard, do not expose this appliance to rain 
or excessive moisture. 
THIS CLASS B DIGITAL APPARATUS MEETS 
ALL REQUIREMENTS OF THE CANADIAN 
INTERFERENCE-CAUSING EQUIPMENT 
REGULATIONS. FCC Declaration of Conformity
Declaration of Conformity for Products Marked 
with FCC Logo, 
United States Only
This device complies with Par t 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation. 
 
						

							35
Commission Federale de la Communication 
(FCC Declaration)
  
Cet équipement a été testé et déclaré 
conforme auxlimites des appareils numériques 
de class B,aux termes de lar ticle 15 Des 
règles de la FCC . Ces limites sont conçues 
de façon à fourir une protection raisonnable 
contre les interférences nuisibles dans le 
cadre dune installation résidentielle. CET 
appareil produit, utilise et peut émettre des 
hyperfréquences qui, si lappareil nest pas 
installé et utilisé selon les consignes données, 
peuvent causer des interférences nuisibles aux 
communications radio. Cependant, rien ne 
peut garantir labsence dinterférences dans 
le cadre dune installation par ticulière. Si cet 
appareil est la cause dinterférences nuisibles 
pour la réception des signaux de radio ou de 
télévision, ce qui peut être décelé en fermant 
léquipement, puis en le remettant en fonction, 
lutilisateur pourrait essayer de corriger la 
situation en prenant les mesures suivantes:
•   Réorienter ou déplacer lantenne de réception. 
•   Augmenter la distance entre léquipement et 
le récepteur. 
•   Brancher léquipement sur un autre circuit que 
celui utilisé par le récepteur. 
•   Demander laide du marchand ou dun 
technicien chevronné en radio/télévision.
  Toutes modifications nayant pas reçu 
lapprobation des ser vices compétents 
en matière de conformité est susceptible 
dinterdire à lutilisateur lusage du présent 
équipement.
Nutiliser que des câbles RF armés pour 
les connections avec des ordinateurs ou 
périphériques. 
CET APPAREIL NUMERIQUE DE LA CLASSE 
B RESPECTE TOUTES LES EXIGENCES DU 
REGLEMENT SUR LE MATERIEL BROUILLEUR 
DU CANADA.  EN 55022 Compliance (Czech Republic Only)
 
						

							36
Polish Center for Testing and Certification 
Notice
The equipment should draw power from a socket 
with an attached protection circuit (a three-
prong socket). All equipment that works together 
(computer, monitor, printer, and so on) should 
have the same power supply source.
The phasing conductor of the rooms electrical 
installation should have a reser ve shor t-circuit 
protection device in the form of a fuse with a 
nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the 
power supply cable must be removed from the 
power supply socket, which should be located 
near the equipment and easily accessible.
A protection mark B confirms that the 
equipment is in compliance with the protection 
usage requirements of standards PN-93/T-42107 
and PN-89/E-06251.
BSMI Notice (Taiwan Only)
North Europe (Nordic Countries) Information
Placering/Ventilation 
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE 
OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU 
STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation 
ADVARSEL: 
SØRG VED PLACERINGEN FOR, AT 
NETLEDNINGENS STIK OG STIKKONTAKT ER 
NEMT TILGÆNGELIGE. 
Paikka/Ilmankier to 
VAROITUS: 
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO 
VOIDAAN TARVITTAESSA  HELPOSTI 
IRROTTAA PISTORASIASTA. 
Plassering/Ventilasjon 
ADVARSEL: 
NÅR DETTE UTSTYRET PLASSERES, MÅ 
DU PASSE PÅ AT KONTAKTENE FOR 
STØMTILFØRSEL ER LETTE Å NÅ.
 
						

							37
Ergonomie Hinweis (nur Deutschland)
Der von uns geliefer te Farbmonitor entspricht den 
in der Verordnung über den Schutz vor Schäden 
durch Röntgenstrahlen festgelegten Vorschriften. 
Auf der Rückwand des Gerätes befindet sich 
ein Aufkleber, der auf die Unbedenklichkeit der 
Inbetriebnahme hinweist, da die Vorschriften über 
die Bauar t von Störstrahlern nach Anlage III ¤ 5 
Abs. 4 der Röntgenverordnung erfüllt sind. 
Damit Ihr Monitor immer den in der Zulassung 
geforder ten Wer ten entspricht, ist darauf zu 
achten, daß 
1.  
Reparaturen nur durch Fachpersonal 
durchgeführ t werden. 
2.   nur original-Ersatzteile verwendet werden. 
3.   bei Ersatz der Bildröhre nur eine bauar tgleiche 
eingebaut wird. 
Aus ergonomischen Gründen wird empfohlen, 
die Grundfarben Blau und Rot nicht auf dunklem 
Untergrund zu verwenden (schlechte Lesbarkeit 
und erhöhte Augenbelastung bei zu geringem 
Zeichenkontrast wären die Folge). 
Der arbeitsplatzbezogene Schalldruckpegel nach 
DIN 45 635 beträgt 70dB (A) oder weniger. 
ACHTUNG: BEIM AUFSTELLEN 
DIESES GERÄTES DARAUF 
ACHTEN, DAß NETZSTECKER UND 
NETZKABELANSCHLUß LEICHT 
ZUGÄNGLICH SIND.  China RoHS 
The Peoples Republic of China released a 
regulation called Management Methods for 
Controlling Pollution by Electronic Information 
Products or commonly referred to as China 
RoHS. All products including CRT and LCD 
monitor which are produced and sold for China 
market have to meet China RoHS request.环保使用期限 
此标识指期限(十年),电子信息产品中含有的
有毒有害物质或元素在正常使用的条件下不
会发生外泄或突变,  电子信息产品用户使用该
电子信息产品不会对环境造成严重污染或对
其人身、 财产造成严重损害的期限．
 
						

							38
6.  Customer care and warranty
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA 
TO REVIEW DETAILS OF YOUR WARRANTY 
COVERAGE
WESTERN EUROPE  
Austria / Belgium / Denmark / France / 
Germany / Greece / Finland / Ireland / Italy / 
Luxembourg / the Netherlands / Norway / 
Por tugal / Sweden / Switzerland / Spain / 
United Kingdom / Poland
EASTERN EUROPE  
Czech Republic / Hungar y / Russia / Slovakia / 
Slovenia / Turkey
LATIN AMERICA
Argentina / Brasil
NORTH AMERICA 
Canada / USA
PACIFIC
Australia / New Zealand
ASIA 
China / Hong Kong / India / Indonesia / Korea / 
Malaysia / Pakistan / Philippines / Singapore / 
Taiwan / Thailand / Vietnam
AFRICA 
South Africa
MIDDLE EAST 
United Arab  EmiratesWhat is covered?
 
The Philips F1rst Choice Warranty applies within 
Andorra, Austria, Belgium, Cyprus, Denmark, 
France, Germany, Greece, Finland, Ireland, 
Italy, Liechtenstein, Luxembourg, Monaco, the 
Netherlands, Norway, Poland, Por tugal, Sweden, 
Switzerland, Spain and the United Kingdom 
and only for monitors originally designed, 
manufactured, approved and/or authorized for 
usage within these countries.
Warranty coverage begins as from the day you 
buy your monitor. For three years thereafter, your 
monitor will be swapped by at least an equivalent 
monitor in case of defects provided for under the 
warranty coverage.
The swap monitor remains yours and Philips 
keeps the defective/original monitor. For the swap 
monitor the warranty period remains equal to 
that of your original monitor, being 36 months as 
from the purchase date of your original monitor. Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor.
All Philips monitors are designed and 
manufactured to high standards and 
deliver high-quality performance, ease 
of use and ease of installation. Should 
you encounter any difficulties while 
installing or using this product, please contact 
the Philips helpdesk directly to benefit from your 
Philips F1rst Choice Warranty. This three-year 
ser vice warranty entitles you to a swap model 
on-site if your monitor turns out to be faulty or 
defective. Philips aims at a swap within 48 hours 
of your call being received.