Philips 240bw9cs User Manual
Have a look at the manual Philips 240bw9cs User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
4NBSU.BOBHF
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
>](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-65.png "Page 66
4NBSU.BOBHF
Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temp\
erature function in SmartControl is
not responding, why?
A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. \
To use sRGB, you need to
disable Smartlmage with the
button at the front bezel of your monitor.RETURN TO TOP OF THE PAGE
>")
![Page 67
*OTUBMMJOH:PVS-$%.POJUPS
• Front View Product
Description
• Connecting to Your PC
• The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD menu
4
To adjust brightness of the display
5
To adjust volume of the display
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings / Return to previous OSD...](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-66.png "Page 67
*OTUBMMJOH:PVS-$%.POJUPS
• Front View Product
Description
• Connecting to Your PC
• The Base
• Getting Started
• Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
1To switch monitors power On and Off
2
To access OSD menu
3
To adjust the OSD menu
4
To adjust brightness of the display
5
To adjust volume of the display
6
Automatically adjust the horizontal position, vertical position, phase a\
nd
clock settings / Return to previous OSD...")
![Page 69
*OTUBMMJOH:PVS-$%.POJUPS
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1920x\
1200, 60Hz.
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.RETURN TO TOP OF THE PAGE](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-68.png "Page 69
*OTUBMMJOH:PVS-$%.POJUPS
Optimizing Performance
µFor best performance, ensure that your display settings are set at 1920x\
1200, 60Hz.
Note: You can check the current display settings by pressing the OK button \
once. The current display mode is shown in OSD main controls called
RESOLUTION.RETURN TO TOP OF THE PAGE")
![Page 71
$POOFDUJOHUP:PVS1$
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
*available for selective models
>](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-70.png "Page 71
$POOFDUJOHUP:PVS1$
1) Connect the power cord to the back of the monitor firmly. (Philips has\
pre-connected
VGA cable for the first installation.
*available for selective models
>")
![Page 72
$POOFDUJOHUP:PVS1$
*available for selective models
2) Connect to PC (a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our
computer.
(c) Connect the PC audio cableto the audio connector on the back of your
computer.
(d) Connect the USB upstream port on the monitor and the USB port on PC with\
a USB cable. The USB downstream port is now ready for any USB device to \
plug in.
(e)
Plug the power cord of your...](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-71.png "Page 72
$POOFDUJOHUP:PVS1$
*available for selective models
2) Connect to PC (a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our
computer.
(c) Connect the PC audio cableto the audio connector on the back of your
computer.
(d) Connect the USB upstream port on the monitor and the USB port on PC with\
a USB cable. The USB downstream port is now ready for any USB device to \
plug in.
(e)
Plug the power cord of your...")
![Page 74
5IF#BTF
Attach the monitor stand to the monitor column until the tabs click in\
to place before
releasing the height adjustable column.
Remove base stand
Before you start disassembling the monitor base, please follow the instr\
uctions below to
avoid damage or injury.
(a) Extend the monitor stand to its maximum height.
>](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-73.png "Page 74
5IF#BTF
Attach the monitor stand to the monitor column until the tabs click in\
to place before
releasing the height adjustable column.
Remove base stand
Before you start disassembling the monitor base, please follow the instr\
uctions below to
avoid damage or injury.
(a) Extend the monitor stand to its maximum height.
>")
![Page 75
5IF#BTF
(b) Place the monitor face down on a smooth surface, taking care to a\
void scratching or
damaging the screen. Then lift the monitor stand.
(c) Press the release button on the rear of the stand to remove the ba\
se from the stand.
>](http://img.usermanuals.tech/thumb/59/52415/w64_philips_240bw9cs-user-manual-74.png "Page 75
5IF#BTF
(b) Place the monitor face down on a smooth surface, taking care to a\
void scratching or
damaging the screen. Then lift the monitor stand.
(c) Press the release button on the rear of the stand to remove the ba\
se from the stand.
>")
$POOFDUJOHUP:PVS1$ 1) Connect the power cord to the back of the monitor firmly. (Philips has\ pre-connected VGA cable for the first installation. *available for selective models >
$POOFDUJOHUP:PVS1$
*available for selective models
2) Connect to PC (a)
Turn off your computer and unplug its power cable.
(b)
Connect the monitor signal cable to the video connector on the back of y\
our
computer.
(c) Connect the PC audio cableto the audio connector on the back of your
computer.
(d) Connect the USB upstream port on the monitor and the USB port on PC with\
a USB cable. The USB downstream port is now ready for any USB device to \
plug in.
(e)
Plug the power cord of your computer and your monitor into a nearby outl\
et.
(f)
Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
RETURN TO TOP OF THE PAGE
>
5IF#BTF
• Install base stand
• Remove base stand
•
Front View Product
Description
• Accessory Pack
• Connecting to your PC
• Getting Started
• Optimizing Performance
• Remove the Base
The Base
Install base stand
Place the monitor base stand on a stable surface.
Firmly grasp the monitor with both hands.
>
5IF#BTF Attach the monitor stand to the monitor column until the tabs click in\ to place before releasing the height adjustable column. Remove base stand Before you start disassembling the monitor base, please follow the instr\ uctions below to avoid damage or injury. (a) Extend the monitor stand to its maximum height. >
5IF#BTF (b) Place the monitor face down on a smooth surface, taking care to a\ void scratching or damaging the screen. Then lift the monitor stand. (c) Press the release button on the rear of the stand to remove the ba\ se from the stand. >
5IF#BTF Remove the Base Condition: µfor VESA standard mounting applications Remove the 4 screw covers. >
5IF#BTF Remove the 4 screws and then remove the base from the LCD monitor. >
5IF#BTF Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. RETURN TO TOP OF THE PAGE >
(FUUJOH4UBSUFE
Your LCD Monitor :
• Front View Product
Description
• Setting Up and Connecting
Your Monitor
• Getting Started
• Optimizing Performance
Getting Started
Getting Started
Use the information file ( .inf) for Windows® 98/2000/XP/Vista or l\
ater
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
requirements for
Windows® 98/2000/XP/Vista. This information file ( .inf) should be \
installed in order that your
Philips monitor can be enabled from the Monitor dialog box in Windows®\
98/2000/XP/Vista and
the Plug & Play application can be activated. The installation procedure\
based on Windows®
98, 2000, XP and Vista is specified as follows.
For Windows® 98
Start Windows® 98
Click on the Start button, point to Settings, and then click on Con\
trol Panel.
Double click on the Display Icon.
Select the Settings tab then click on Advanced....
Select the Monitor button, point to Change... then click on Next
Select Display a list of all the drivers in a specific location, so you\
can choose the driver
you want. then click on Next and then click on Have Disk....
Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click
on the OK button.
Click on the OK button then select your monitor model and click on the\
Next button.
Click on the Finish button then the Close button.
For Windows® 2000
Start Windows® 2000.
Click on the Start button, point to Settings, and then click on Con\
trol Panel.
Double click on the Display Icon.
Select the Settings tab then click on Advanced....
Select Monitor
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please
stop installation.
- If the Properties button is active. Click on Properties button. Pl\
ease follow the steps
given below.
Click on Driver and then click on Update Driver... then click on the\
Next button.
Select Display a list of the known drivers for this device so that I ca\
n choose a specific
driver, then click on Next and then click on Have disk....
Click on the Browse... button then select the appropriate drive F: ( \
CD-ROM Drive).
Click on the Open button, then click on the OK button.
¹>