Philips 240bw9cs User Manual

							1IJMJQT
1JYFM
%FGFDU
1PMJDZ


defects and several types of sub pixel defects within each category. 
Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit o\
r on. That is, 
a bright dot is a sub-pixel that stands out on the screen when the monitor displays \
a dark pattern. 
There are the types of bright dot defects:
One lit red, green or blue sub 
pixelTwo adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels 
(one white pixel)




A red or blue bright dot must be more than 50 percent brighter than neighboring dots 
while a green bright dot is 30 percent brighter than neighboring dots.
 
 
Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or\
 off. That 
is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays \
a light pattern. 
These are the types of black dot defects:
One dark sub pixel Two or three adjacent dark sub pixels
Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same type that are near to o\
ne another may be more 
noticeable, Philips also specifies tolerances for the proximity of pixel\
 defects. 


 



 



> 
						

							1IJMJQT
1JYFM
%FGFDU
1PMJDZ


Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects durin\
g the warranty period, a TFT 
LCD panel in a Philips flat panel monitor must have pixel or sub pixel d\
efects exceeding the 
tolerances listed in the following tables.


BRIGHT DOT DEFECTSACCEPTABLE LEVEL 
MODEL 240BW9
1 lit subpixel 3
2 adjacent lit subpixels 1
3 adjacent lit subpixels (one white pixel) 0
Distance between two bright dot defects* >15mm
Total bright dot defects of all types 3


BLACK DOT DEFECTSACCEPTABLE LEVEL 
MODEL 240BW9
1 dark subpixel 5
2 adjacent dark subpixels 2
3 adjacent dark subpixels 0 
Distance between two black dot defects* >15mm
Total black dot defects of all types 5


TOTAL DOT DEFECTSACCEPTABLE LEVEL 
MODEL 240BW9
Total bright or black dot defects of all types 5
> 
						

							1IJMJQT
1JYFM
%FGFDU
1PMJDZ
Note: 
* 1 or 2 adjacent sub pixel defects = 1 dot defect 


RETURN TO TOP OF THE PAGE

 

 

 

> 
						

							4NBSU.BOBHF





 
 
 

 





• 
Product Information

•Philips Pixel Defect Policy

•SmartManage Features and 
Benefits 

•
Philips SmartControl ll



• System support and 
requirement

•Installation

•Start to use

•Q&A


 



SmartManage & SmartControl II (Selective Models)





 
Introduction
Philips SmartManage is an advanced solution for users, corporate/institu\
tion IT administrator in particular, to manage their 
Philips monitors as part of the asset management environment. The soluti\
on includes three essential components, Philips 
SmartManage Administrator, and Philips SmarControl and Agent. 
If you are a small to middle business company, you may not need such pro\
fessional software to do the asset 
management. Thus, Philips provide you a compact version of SmartManage, \
SmartManage Lite. You can use 
SmartManage Lite to manage your Philips Monitors via LAN. Please. refer \
to below comparison chart and determine if 
which one suit for your environment best. 

 

> 
						

							4NBSU.BOBHF


 
SmartManage Features and Benefits
The Philips SmartManage is a working console for IT management to gather\
 monitors assets information, run asset report, 
control assets security, monitor assets security, and issue instant mess\
ages to monitor users. Philips SmartManage includes 
the following major features: 


Provides an additional security measure that helps corporate users safeg\
uard their investment.

Power saving feature that reduces utility costs and manpower required to\
 turn monitors on or off.

Provides an efficient means for adjusting monitor performance and settin\
gs.

Built-in asset reports reduce audit/maintenance manpower, cycle time and\
 costs.


A trial version of SmartManage can be downloaded from 
http://www.altiris.com/philips


You can also download SmartManage Lite 
http://www.portrait.com/dtune/phl/enu/index.html
SmartManage is a software dedicated to business environments. Personal u\
sers normally do not need to use 
SmartManage.
Philips SmartManage is a solution joint developed by Philips and Altiris\
 Inc. 
Philips SmartControl II and SmartManage Lite is a solution joint develop\
ed by Philips and Portrait Display, Inc. 
 
Philips SmartControl II

> 
						

							4NBSU.BOBHF
SmartControl II is monitor-based software with an easy-to-use on-screen \
graphic interface that guides you through fine-
tuning resolution, color calibration and other display settings includin\
g brightness, contrast, clock & phase, position, RGB, 
white point and - on models with onboard speakers - volume adjustments. \
Monitors install SmartControl II can also have the 
ability to be managed by SmartManage which can manage PCs and Monitors o\
r by SmartManage Lite which can manage 
Monitors. (Please refer to SmartManage/SmartManage Lite chapter) .


System support and requirement:


Sytem support: 2000, XP, NT 4.0, XP 64 Edition, Vista 32/64. IE Support \
6.0/7.0.

Language support: English, Simplified Chinese, German, Spanish, French, \
Italian, Russian, Portuguese.

Philips Monitor support DDC/CI Interface.


Installation:
1. Installer – Install Shield Welcome
µ




Next Button takes user to next Install pane. µ




Cancel prompts user if they want to cancel installation.

> 
						

							4NBSU.BOBHF
2. Installer – Install Shield Legal
µ




Choose I accept for installation process. µ




Cancel prompts user if you want to cancel installation.

3. Installer – Install Shield Program Files
µ




Check the box if you wants to install SmartManage Lite Asset Management \
services. 
Personal user usually not need to active this function.Read SmartManage \
section in this manual before you choose 
SmartManage Lite function
 

> 
						

							4NBSU.BOBHF
4. Installer – Installation Process
µ




Follow the instruction and complete the installation. µ




You can launch after installation complete.µ




If you want to launch later, you can either click the shortcut on deskto\
p or toolbar.

> 
						

							4NBSU.BOBHF
> 
						

							4NBSU.BOBHF
>