Philips 23pf9945 Operating Instructions

							31
ACCESSING THE LCD TV FEATURES MENU
Press Button
8. Select CHANGE CODE.
9. Enter CHANGE CODE mode.
10. Key in the access code of your
choice.
11. Confirm access code.
When the new code is confirmed,
the message CORRECT will
appear.
i12. Exit menu from screen.
Note :  After you have exit menu from screen and  you want to enter child lock menu again ,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
Ñ
FEATURES
CHILD LOCK
•LOCK CHANNEL ENTER
CHANGE CODENEW CODE
•CLEAR ALL– – – –
Ñ
FEATURES
CHILD LOCK
•LOCK CHANNELENTER
CHANGE CODENEW CODE
•CLEAR ALLx x x x
Ñ
FEATURES
CHILD LOCK
•LOCK CHANNELCONFIRM
CHANGE CODECODE
•CLEAR ALLx x x x
Ñ
FEATURES
CHILD LOCK
•LOCK CHANNELCONFIRM
CHANGE CODECODE
•CLEAR ALLx x x x
CORRECT
Result on TV Screen
  ACTIVATING THE CHILD LOCK (CHANGE CODE)
456
78
9
0 12
3
456
78
9
0 12
3
17/23PF9945/69 p27-383/13/03, 4:47 PM 31
 
						

							32
ACCESSING THE LCD TV FEATURES MENU
Press ButtonResult on TV Screen
    ACTIVATING THE CHILD LOCK (LOCK CHANNEL)
FEATURES
•TIMERTIME•MODE SELECTSTART TIME•CHILD LOCKSTOP TIME•WIDE SCREENCHANNEL
ACTIVATE
É 


1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
4. Select CHILD LOCK .
5. Enter ACCESS CODE mode.
6. Key in access code .
7. Enter LOCK CHANNEL mode.
 or 8. Select the channel you want to block.
9. Activate blocking of channel.  A
keylock symbol  will appear beside
the channel number indicating that
it is locked.
i10. Exit menu from screen.
Note : You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is
locked,  AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CODE” will appear on the screen. You need to enter the ACCESS
CODE to enable you to enter the INSTALL menu.
MENUkMENUkMENUk
FEATURES
•TIMER ACCESS CODE•MODE SELECT --:--•CHILD LOCK•WIDE SCREENÉ 


Ñ
FEATURES
•TIMERACCESS CODE•MODE SELECTX X X X•CHILD LOCKCORRECT
WIDE SCREEN
Ñ
FEATURES
CHILD LOCK
LOCK CHANNEL
•2•CHANGE CODE3•CLEAR ALL4
5
6
É
Ñ
FEATURES
CHILD LOCK
LOCK CHANNEL
•3
F FF F
F•CHANGE CODE4•CLEAR ALL5
6
7
É
17/23PF9945/69 p27-383/13/03, 4:48 PM 32
 
						

							33
ACCESSING THE LCD TV FEATURES MENU
Press ButtonResult on TV Screen
    ACTIVATING THE CHILD LOCK (CLEAR ALL)
FEATURES
•TIMERTIME•MODE SELECTSTART TIME•CHILD LOCKSTOP TIME•WIDE SCREENCHANNEL
ACTIVATE
É 


1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
FEATURES
•TIMER ACCESS CODE•MODE SELECT --:--•CHILD LOCK•WIDE SCREENÉ 


MENUkMENUkMENUk
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
4. Select CHILD LOCK.
5. Enter ACCESS CODE mode.
6. Key in access code.
7. Press button repeatedly until
CLEAR ALL is selected.
8. Activate clearing of all locked
channels.
i9. Exit menu from screen.
Note
You can also unlock individual channel by the LOCK CHANNEL menu
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LOCK (LOCK CHANNEL)”.
• Select the channel you want to unlock by the 
 or  (CURSOR UP / DOWN)
buttons.
• Press the  
  (CURSOR RIGHT) button to unlock channel (the keylock symbol will
disappear).
Ñ
FEATURES
•TIMERACCESS CODE•MODE SELECTX X X X•CHILD LOCKCORRECT
WIDE SCREEN

FEATURES
CHILD LOCK
•LOCK CHANNEL•CHANGE CODE
CLEAR ALL•Ñ
É

FEATURES
CHILD LOCK
•LOCK CHANNEL•CHANGE CODE
CLEAR ALL•CLEAREDÑ
É
17/23PF9945/69 p27-383/13/03, 4:48 PM 33
 
						

							34
Screen Format function allows you a choice of different formats for your viewing pleasure,
namely : - 4:3, Zoom 14:9, Zoom 16:9, Subtitle Zoom, Superwide, Widescreen and
Full Screen.
Enter the FEATURES menu and select WIDE SCREEN to cycle through the various
screen formats and select the format of your choice. You can also use 
q  (SCREEN
FORMAT) or 
    buttons to cycle through the various screen formats.
Definition of Screen Formats
4:3 Mode
This picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.
Zoom 14:9 Mode
This picture is enlarged to 14:9 format, a thin black band remains on
both sides of the picture.
Zoom 16:9 Mode
This picture is enlarged to 16:9 format. This mode is recommended
when displaying pictures which have black bands at the top and bottom
(letterbox format).
Subtitle Zoom Mode
This mode is use to display 4:3 pictures using the full surface of the
screen leaving the subtitles visible.
Superwide Mode
This mode is use to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
Widescreen Mode
This mode restores the correct proportions of pictures transmitted
in 16:9 using full screen display.
Note : If you display a 4:3 picture in this mode, it will be enlarged
horizontally.
Full Screen
Select this mode when displaying pictures have black bands at the top
and bottom or at the left and right to enable you to enjoy full display
of the picture on the screen.
USING THE SCREEN FORMAT
17/23PF9945/69 p27-383/13/03, 4:48 PM 34
 
						

							35
ACTIVATING THE SLEEPTIMER
Sleeptimer function allows you to select a time period in which the set \
will switch to standby
mode automatically upon reaching the selected time period.  You have a c\
hoice of time period
starting from OFF up to a maximum of 240 minutes
1. Press the 
 (SLEEPTIMER)  button to display the
time period.
2. Press the  
   (SLEEPTIMER)  button repeatedly to
cycle through the various time periods and select the
time period of your choice.
Note
• During the last minute of a Sleep time setting, an
on-screen countdown will be displayed. Pressing any
button on the remote control during the countdown
will cancel the Sleep-timer.
• During the last 10 seconds of a Sleep timer setting,
an on-screen display will read Goodbye.
ACTIVATING THE ACTIVE CONTROL
➠
This feature automatically adjust settings for optimal picture quality c\
ontinuously under any
signal conditions.   You have a choice of 4 modes :  ACTIVE CONTROL OFF ,  A CTIVE
CONTROL MIN , A CTIVE CONTROL MED  and  ACTIVE CONTROL MAX
HOW TO ACCESS AND SELECT THE  ACTIVE CONTROL MODE
1. Press the ACTIVE
CONTROL    ( ACTIVE CONTROL ) button
repeatedly to cycle through the various four
A CTIVE CONTROL  modes and select your
desired mode.
2. Press  
i  ( OSD ) button to exit menu from screen
or wait for the On-Screen Display to time out.
➠
ACTIVE CTRL MAX
ACTIVE CTRL OFF
ACTIVE CTRL MIN
SLEEP OFF
SLEEP 240
17/23PF9945/69 p27-38 8/15/03, 1:47 PM
35
 
						

							36
  ACTIVATING THE LCD TV SMART PICTURE / SOUND CONTROL
SMART PICTURE feature offers you a choice of 5 picture settings, namely,  RICH,
NATURAL ,  SOFT ,  PERSONAL and MULTIMEDIA .
SMART SOUND  feature offers you a choice of 4 sound settings, namely,  THEATRE,
MUSIC,  VOICE  and PERSONAL .
Press  
SMART  ( SMART PICTURE ) or SMART  (SMART SOUND ) button repeatedly to cycle
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL :Picture settings are set to your
preference.
RICH :Emphasize very vibrant colours.
(Suitable for AV mode in
brightly-lit room)
NATURAL :Emphasize original colours.
SOFT :Emphasize “warm” colours.
(Suitable for dimly-lit room
condition and gives cinema-like
effect when light is switched off).
MULTIMEDIA :Emphasize “soft” colours. (Suitable
for playing computer games,
surfing, etc.)
Note  :  The  PERSONAL  setting is the setting that
you set up using the Picture menu in the main menu.
This is the only setting in the Smart Picture settings
that can be changed.  All the other settings are
pre-set at the factory.
Definition of Sound Settings
PERSONAL :Sound settings are set to your
preference.
VOICE :Emphasize high tone. (Treble boosted)
MUSIC :Emphasize low tone. (Bass boosted)
THEATRE :Emphasize sensation to action.
(Bass and Treble boosted)
Note  : The values shown in the Picture/Sound
Setting diagrams are sample values only. Your
television’s values may vary and display different
numbers.
PERSONAL
BRIGHTNESS 48
COLOR 41
PICTURE 81
SHARPNESS 3
RICH
BRIGHTNESS 42
COLOR 30
PICTURE 50
SHARPNESS 3
NATURAL
BRIGHTNESS 43
COLOR 30
PICTURE 75
SHARPNESS 3
SOFT
BRIGHTNESS 43
COLOR 27
PICTURE 79
SHARPNESS 3
MULTIMEDIA
BRIGHTNESS 45
COLOR 30
PICTURE 71
SHARPNESS 3
PERSONAL
120HZ 20
500HZ 6
1500HZ 6
5KHZ 9
10KHZ 15
VOICE
120HZ 5
500HZ 5
1500HZ 6
5KHZ 5
10KHZ 3
MUSIC
120HZ 20
500HZ 6
1500HZ 6
5KHZ 9
10KHZ 15
THEATRE
120HZ 26
500HZ 6
1500HZ 6
5KHZ 17
10KHZ 19
17/23PF9945/69 p27-38 8/15/03, 1:47 PM
36
 
						

							37
If a TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system,
usually on page 100. The system transmitted is indicated in the option line at the bottom
of the screen.
&On/Off teletextPress the button once to switch on
andteletext display.  (A channel in which
Superimposeteletext is being transmitted must be
teletext pageselected).
over TVPress the button the second time
programmesuperimpose the teletext page over
the TV programme.
Press the button the third time
to exit teletext mode.
éSelecting aKey in the required teletext page
teletext page(3 digits). The page number is
displayed at the top left hand corner
of the screen.  When the teletext
page is located, the counter stops
searching. If the counter keeps
searching, it means that the page is
not available for selection. If you
make a mistake in keying the page
number, you have to complete
keying the 3-digit number before
re-keying the correct page number.
“AccessingPress the CHANNEL + button to
a teletextdisplay the next page and the
page CHANNEL – button to
display the previous page.
‘Direct Access toThe 4-colour buttons allow you to
an item oraccess directly an item or
correspondingcorresponding pages.
pages
(Main IndexPress the button to return to the
main index page.
USING THE TELETEXT
123
456
78
9
0
SMART
SMART
OKRADIOPC TV HD
VCR
DVD
ACTIVE
CONTROL MODE A/CH
MENU
MUTECH
g
b
X
væo
k
qi
V
2
¬
&
é “‘
(
b
CH
456
78
9
0 12
3
æo
i
17/23PF9945/69 p27-383/13/03, 4:48 PM 37
 
						

							38
§Dual Page Press button to enable you to display
Text dual page text.
è Hold When a dual page is displayed, use this
button to toggle between the dual
page.  Once an active page is
selected, the other page will be on hold
mode.  If the page has sub-pages, use
the Cursor Right  or Left  button to
access the next or previous page
! Selecting a For a teletext page with sub-pages,
sub-page press the Cursor Left  or Right
button to access the previous sub-
page or the next subpage.
ç Reveal/ Press the button once to reveal hidden
Concea linformation (solutions to puzzles,
riddles, etc). Press the button the
second time to conceal information.
This button is applicable only to
teletext page with puzzles, riddles, etc.)
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly view\
ed page and stored
them in the favourite page selection. You can then access directly your \
favourite page by the
colour buttons without having to key in the page number.
1. Press the  
b  (TELEXTEXT ON/OFF ) button to enter teletext mode.
2. Press the  
MENU   ( MENU ) button to enter favourite page selection.  Note : The colour
alphabets at the bottom of the screen is now changed to page numbers.
3. Key in your favourite page by the 
4 5
6
7 8
9
0
1
2
3  (DIGIT 0 -9 ) buttons.
4. Press the 
i ( OSD ) button followed by your desired colour button to store your favourite\
page.
5. Repeat  step 3 to 4 to select and store other favourite pages.
6. To exit Favourite page mode, press  
MENU   ( MENU ) button.
7. Press the 
b  ( TELEXTEXT ON/OFF ) button twice to exit teletext mode.
USING THE TELETEXT
123
4 5
6
7 8
9
0
SMART
SMART
OKRADIOPC TV HD
VCR
DVD
ACTIVE
CONTROL
MODE A/CH
MENU

MUTECH
g
b
X
væo
k
qi
V
2
¬
§è
!
!
ç
X
g
v
17/23PF9945/69 p27-38 8/15/03, 1:49 PM
38
 
						

							39
ACCESSING THE FM RADIO INSTALLATION MENU
This TV also provides you with the FM RADIO for your listening pleasure.  To enable you to
access the FM RADIO mode,  you must connect the cable from  FM Antenna socket to the
FM Radio mains.
RADIO1. Enter into FM Radio mode.
MENU2. Enter FM RADIO main menu.
3. Press button button repeatedly
until INSTALL is highlighted.
4. Enter INSTALL menu.
 or 5. Press button button repeatedly to
scroll through the available FM Mode
On-screen options. These options
include LANGUAGE, AUTO STORE,
MANUAL STORE, SORT and NAME.
LANGUAGE – Choose to view the
On-screen menu in your desired language.
AUTO STORE –  Allows you to search
the FM antenna signal and store any FM
channel it finds in the TV’s memory.
MANUAL STORE –  Allows you to
manually tune any available FM signals.
SORT– Allows you to rearrange your
stored FM stations in the order you
prefer.
NAME – Allows you to apply a name
to your programmed FM radio stations.
Add your own personal name or choose
one from the predefined list.
6. Adjust or select items within the
highlighted feature sub-menu.
i7. Exit menu from screen.
Press ButtonResult on TV Screen
Ñ•SOUNDEQUALIZER•FEATURES BALANCE•INSTALL AVL
INCR.SURROUND
É


•SOUND LANGUAGE•FEATURES AUTO STORE•INSTALLMANUAL STORE
SORT
NAME
É
ÑINSTALL  LANGUAGE•ENGLISH•AUTO STORE B.MELAYU•MANUAL STORE•SORT•NAME•
ÑÉ 





É
INSTALL•LANGUAGE
AUTO STORE•SEARCH•MANUAL STORE•SORT•NAME•
Ñ
É
INSTALL•LANGUAGE SEARCH•AUTO STORE CHANNEL•MANUAL STORESTORE•SORT•NAME



INSTALL•LANGUAGE FROM•AUTO STORE TO•MANUAL STORE EXCHANGE•SORT•NAMEÉ 


INSTALL•LANGUAGE•AUTO STORE•MANUAL STORE•SORT
NAME•PERSONALÑÉ

17/23PF9945/69 p39-513/13/03, 4:44 PM 39
 
						

							40
USING THE FM RADIO SOUND MENU
Sound menu items Activities
EQUALIZER Allows you a choice of different sound frequencies.
B ALANCE Increase or decrease to adjust balance level.
AV L As variation in signal conditions can result a sudden
(Auto Volume change in volume during FM channel switching, selecting
Leveller) the “ON” function will enable the  volume to remain at a
standard volume level.
INCREDIBLE Allows you to select between Incredible Surround
SURROUND Dolby Virtual or Stereo sound when transmission is in stereo.  Allows you to select between Spatial and Mono
sound when transmission is in mono.
USING THE FM RADIO SMART SOUND CONTROL
FM RADIO SMART SOUND  feature offers you a choice of 5 sound settings, namely,
ROCK, POP, CLASSICAL, JAZZ,  and PERSONAL .
1) Press the 
RADIO  ( FM RADIO ) button to enter  FM RADIO mode.
2) Press 
SMART  ( SMART SOUND )  button repeatedly to cycle through the various settings
and select your desired sound mode.
3) Press the 
i ( OSD ) button to exit On-Screen display  .
The Sound menu allows you to make adjustments to the sound.
Note
:  Ensure you are in  FM RADIO mode before you access  FM RADIO main menu.
1.Press MENU button to enter  FM RADIO 2. Press   button to enter the
main menu.  SOUND option is SOUND menu.
highlighted.
MENUkMENUk
3. In the  SOUND  menu, press   or   button to adjust level or select desired  setting.
4. Use the 
       buttons to select the various  SOUND menu items and
make your desired adjustments and access the sub-menus.
5. Press 
i  button to exit menu from screen.
SOUND
•EQUALIZER 120HZ•BALANCE 500HZ•AVL 1500HZ•INCR.SURROUND 5KHZ•10KHZ
É
▼▲
17/23PF9945/69 p39-51 8/25/03, 5:30 PM
40