Philips 23pf9945 Operating Instructions

LCD TV LCD TV LCD TV
Operating Instructions
17PF9945
23PF9945
17/23PF9945/69 p13/13/03, 4:43 PM 1
 

2
Safety Information/Precaution ................................................................................................ 3
Hooking Up Your TV Use / Care of Remote Control  ....................................................4
Checking the Supplied Accessories ....................................................................................... 5
Dressing the Cables .................................................................................................................. 5
Monting...

3
SAFETY INFORMATION
•Disconnect mains plug when :
– the red light below the TV screen is flashing continuously.
– cleaning the TV screen. Never use abrasive cleaning agents.
– there is a lightning storm.
– the set is left unattended for a prolonged period of time.
•No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
•Do not place your TV set under direct sunlight or heat.
•Leave at least 5 cm around each side of TV set to allow for proper ventilation....

4
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
withstand the weight of the set.
•  Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
ª Do not place TV set near a radiator or other sources
of heat.
• Do not place TV set where it can be exposed to rain
or excessive moisture.
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
Mains Connection
• Insert the mains plug into the wall socket. For...

5
CHECKING THE SUPPLIED ACCESSORIES
The following accessories are supplied together with the LCD set.
456
78
9
0
SM
ART S
MAR
TOKR
ADIOP
CTV
V
C
R
D
V
DACTIVE
C
ONTR
OL MODEM
ENU
PM
U
T
E
æg
b
X
i
q¬
v
Vk12
3
o
DRESSING THE CABLES
For better cable management,  it is advisable to insert all cables through the hole of the
stand as shown in the diagram after connecting to the respective connectors. For connection
description, refer to sections on :
– Connecting the Audio/Video Sockets (Playback)
–...

6
MOUNTING PROCEDURES FOR LCD TV
If you want to mount the LCD TV on any device, this set has four mounting interfaces fulfilling
VESA specifications.
1) Lay the LCD TV face-down on a flat surface with a cushion or other soft material to
protect the screen.
2) Remove all cables connected on the TV.
3) Remove the four screws and then remove the stand from the LCD TV.
4) Screw in mounting plate. Reconnect all cables to the LCD TV.
You are now ready to mount the device. Below is an example of adjusted ranges...

7
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the
AUDIO and VIDEO INPUT sockets on the rear of the TV.
– Connect the VIDEO and AUDIO IN
sockets on the rear of the LCD TV to the
AUDIO and VIDEO OUT sockets on
the  VCR.
The S-Video connection on the Side of
the LCD TV is used for the playback of
S-VHS  VCR tapes, Video Discs, Video
Games or Compact Disc-Interactive (cd-i)
discs. Better picture detail and clarity is...

8
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)
You can view the playback of DVD discs by using the COMPONENT  VIDEO INPUT
sockets at the rear of the LCD  TV.
–Connect the “Y”, “Pb” and the “Pr” sockets at the rear of the LCD TV to the “Y”, “Pb”
and “Pr” OUTPUT sockets of the DVD player to view playback of DVD discs.
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)
AUDIO Y
LR Pb
Pr
DVD (Equipped 
with Y, Pb and Pr
and Output sockets)
Monitor
outAV1
in Audio
out
COMP
VIDEO
INPUTFM ANT75Audio in (PC / HD)...

9
Connect the audio cable to the audio input
of your audio equipment and to AUDIO L
and R at the rear of the TV
If you have a subwoofer, connect the cable
from Subwoofer Out socket to an external
amplifier.
You can listen to your TV sound via your
 audio equipment.
Note : If you want to connect more
equipment to your TV, consult your dealer.
Insert the plug into the headphone soket
; at the Side sockets of the LCD TV.
To enable you to access FM radio mode in
the TV, you must connect from  FM Antenna...

10
CONNECTING THE PC EQUIPMENT
To enable you to access PC mode in the TV, you must connect the following :
–Connect adaptor from DC in to the mains.
–Connect the PC input (VGA) to the Monitor Output of  your PC
–Connect Audio L and R output of your PC to the Audio IN  L and R of your LCD TV.
–Connect the “Y”, “Pb and the “Pr” sockets of the
HD INPUT at the rear of the LCD  TV to the
“Y”, “Pb” and “Pr” OUTPUT sockets of the
DVD player.
–Connect Audio L and R OUTPUT of your
Set-top box to the Audio IN  L...