Philips 22pfl3405 User Manual

							19
Update the TV software
Philips continuously tries to improve its 
products and we recommend that you update 
the TV software when updates are available. 
Check www.philips.com/suppor t for availability.
Check the current software version
1 Press  MENU. 
2 Press  to select [Software update] 
> [Current software inf ].
The TV displays the current software    »
information.
Download the software
1  On your PC , open a web browser and go 
to www.philips.com/support.
2  Download the latest sof tware upgrade 
file to your PC .
3  Decompress the ZIP-file.
4  Copy the autorun.upg file to the root 
director y of the USB device.
Update using a USB device
1  Connect your USB device to the USB 
por t at the side of your T V.
2 Press  MENU.
3 Press  to select [Software update] 
> [Local updates] > [USB].
4 Press OK to update the T V sof tware 
manually.
5  Follow the on-screen instructions to 
complete the update.
Note
The T V restar ts af ter the sof tware update is   •
complete.
Lock or unlock one or more channels
1  When watching T V, press OK to display 
the channel grid.
2 Press  to select a channel to lock or 
unlock.
3 Press  OPTIONS.
4 Press  to select [Lock channel] or 
[Unlock channel].
5  For each selection, press OK to lock or 
unlock the channel.
You are prompted to enter your PIN    »
code. 
6  Enter your code and press OK.
If the channel is locked, a lock icon is    »
displayed.
7  Repeat the process to lock or unlock 
more channels.
Note
Switch the T V off and on again for the change   •
to take effect.
If you access the locked channels by pressing  
  •
P +/- on the remote control or from the 
channel grid, you are prompted to enter your 
PIN code. 
English
EN
 
						

							20
4 Press  to select [Channel], then press 
 to enter.
5  Select one channel to map to the 
decoder / descrambler channel and press 
OK to confirm.
6 Select [Status], then press  to enter.
7 Select [EXT 1] (SCART), the connector 
used by the decoder / descrambler.
8 Press OK.
9 Press  MENU to exit.
Note
Select   •[None] if you do not want to map to 
the decoder / descrambler channel.
Reset the TV to factory 
settings
You can restore the default picture and sound 
settings of your TV. The channel installation 
settings remain the same.
1 Press  MENU.
2 Press  to select [Installation] > 
[Factory settings].
3 Press  to enter [Factory settings].
4 Select [Reset] to star t resetting.
5 Press OK.
6 Press  MENU to exit.
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your   •
USB storage device.
1  Wait for five seconds before you 
disconnect the USB storage device.
Change TV  preferences
Use the preferences menu to customise your 
TV settings.
1 Press  MENU.
2 Press  to select [Installation] > 
[Preferences].
• [Volume bar]: Displays the volume 
bar when you adjust the volume.
• [EasyLink]: Enables one-touch play 
and one-touch standby between 
EasyLink-compliant devices. 
3 Press  to select your preference.
4 Press OK.
5 Press  MENU to exit.
Access decoder channel
You can map channels provided through a 
decoder or descrambler to your TV channel 
selection. In this way, you can select these 
channels by using the RC of your TV. The 
decoder or a descrambler must be connected 
to EXT 1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler.
1 Press  MENU.
2 Press  to select [Installation] > 
[Decoder].
3 Press  to enter [Decoder] menu.
EN
 
						

							21
5 Select [Start], then press OK to re-install 
channels. 
To stop searching, select  • [Stop] and 
press OK.
6 Press OK when installation is complete.
Manually install channels
This section describes how to search and store 
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system set tings are   •
correct.
1 Press  MENU.
2 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
3 Select [System], then press OK to enter.
4 Press  to select your countr y or 
region.
5 Press OK to confirm.
6 Press  MENU to exit.
6 Install channels
The first time you set up your TV, you are 
prompted to select a menu language and to 
install TV and digital radio channels (if available). 
This chapter provides instructions on how to 
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store 
channels automatically.
Step 1 Select your menu language
Note
Skip this step if your language set tings are   •
correct.
1 Press  MENU.
2 Press  to select [Installation] > 
[Menu language].
3 Press  to enter [Menu language].
4 Press  to select a language.
5 Press OK to confirm.
6 Press  MENU to exit.
Step 2 Select your country
Select the countr y where you are installing the 
T V. The available channels for the countr y are 
installed on the TV.
1 Press  MENU.
2 Press  to select [Installation] 
> [Channel installation] > [Channel 
assistant].
The    »[Channel assistant] menu appears.
3 Select [Yes] and then press OK to enter.
4 Press  to select your countr y, then 
press 
 to go to the nex t step.
English
EN
 
						

							22
Step 3 Fine-tune analogue channels
1 Press  MENU.
2 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
3 Press  to select [Fine tune], then press 
 to enter.
4 Press  to adjust frequency.
5 Press OK to confirm.
6 Press  to select [Store current 
channel] to store channel number.
7 Press  to enter [Store current channel].
8 Select [Yes], then press OK to store 
current channel.
9 Press  MENU to exit.
Skip channels
1  When watching T V, switch to the channel 
that you want to skip.
2 Press  MENU.
3 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
4 Press  to select [Skip channel], then 
press 
 to enter.
5 Press  to select [Yes], then press OK 
to skip current channel.
The selected channel is skipped when    »
you press P +/- on your remote 
control or view from the channel grid.
6  To skip more channels, repeat the 
procedure.
Tip
To access the skipped channels, press   •Numeric 
buttons.
To restore a skipped channel, repeat steps 1 to 
  •
4, and then select [No] in step 5.
Step 2 Search and store new TV 
channels
1 Press  MENU.
2 Press  to select [Installation] > 
[Channel installation] > [Analogue: 
manual install].
The    »[Analogue: manual install] menu 
appears.
3 Press  to select [Search], then press  
to enter.
4 Press Numeric buttons to manually enter 
the three-digit frequency.
5 Press OK to begin search.
If a channel is unavailable at the    »
selected frequency, the system searches 
for the next available channel.
6  When the new channel appears, press  
 to select [Store as new channel].
This stores the channel under a new    »
channel number.
7 Press  to enter [Store as new channel].
8 Select [Yes], then press OK to store the 
new channel.
9 Press  MENU to exit.
EN
 
						

							23
Rearrange channels
After you install channels, you can rearrange the 
order in which they appear.
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Reorder], then press 
OK.
4  Select the channel to rearrange, then 
press OK.
The selected channel is highlighted.   »
5 Press  to move the highlighted 
channel to the desired location, then 
press OK.
6 Press  OPTIONS.
  »[Done reordering] appears on the 
screen.
7 Press OK to confirm.
8 Press  BACK to exit the channel grid.
Rename channels
You can rename channels. The name appears 
when you select the channel.
1  When watching T V, press OK to display 
the channel grid.
2 Press  to select the channel to 
rename.
3 Press  OPTIONS.
The channel options menu appears.   »
4 Press  to select [Rename channel], 
then press OK.
A text input box appears.   »
5 Press  to select characters.
6 Press OK to confirm each character.
7 Select [Done], then press OK to finish 
renaming channels.
Tip
The device name can be up to six characters   •
long.
Press 
  •[Aa] to change an uppercase let ter to a 
lowercase let ter and vice versa.
English
EN
 
						

							24
a HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray 
players.
  
Connections via DVI or VGA require an 
additional audio cable (see ‘Connect a 
computer’ on page 27).
b  EXT 1 (RGB/CVBS)
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
c  For use by service personnel only.
7 Connect devices
This section describes how to connect devices 
with different connectors. Examples are 
provided in the Quick Star t.
Note
You can use different types of connectors to   •
connect a device to your TV.
Back connectors
  
EN
 
						

							25
f  PC IN (VGA and AUDIO) 
Audio and video input from a computer.
  
g SERV. U
For use by ser vice personnel only.
VGA
PC AUDIO IN/ PC IN(AUDIO)
VGA
d TV ANTENNA
Signal input from an antenna, cable or 
satellite.
  
e  EXT 2 (Y Pb Pr and AUDIO L/R) 
Analogue audio and video input from 
analogue or digital devices such as DVD 
players or game consoles.
  
TV ANTENNA
English
EN
 
						

							26
c AUDIO L/R
Audio input from analogue devices 
connected to VIDEO.
  
d VIDEO
Composite video input from analogue 
devices such as VCRs.
  
Side connectors
  
a  USB (Used for software upgrade only)
Data input from USB storage devices.
  
b 
Stereo audio output to headphones or 
earphones.
EN
 
						

							27
• HDMI cable and HDMI-DVI adaptor
  
• VGA cable
  
DVI
PC AUDIO IN/ PC IN(AUDIO)
VGA
PC AUDIO IN/ PC IN(AUDIO)
VGA
Connect a computer
Before you connect a computer to the TV
Set the screen refresh rate on your  • 
computer to 60Hz.
Select a suppor ted screen resolution on  • 
your computer.
Connect a computer with one of the 
following connectors:
Note
Connections via DVI or VGA require an   •
additional audio cable.
• HDMI cable
  
• DVI - HDMI cable
  
DVI
PC AUDIO IN/ PC IN(AUDIO)
English
EN
 
						

							28
Use a Kensington lock
There is a Kensington security slot at the back 
of the TV. Prevent theft by looping a Kensington 
lock between the slot and a permanent object, 
such as a heavy table.
  
Use Philips EasyLink
Your T V suppor ts Philips EasyLink, which 
uses the HDMI CEC (Consumer Electronics 
Control) protocol. EasyLink-compliant devices 
that are connected through HDMI connectors 
can be controlled by a single remote control. 
Note
The EasyLink-compliant device must be   •
switched on and selected as the source.
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC devices.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not   •
intend to use it.
1 Press  MENU.
2 Press  to select [Setup] > 
[Installation] > [Preferences] > 
[EasyLink].
3 Select [On] or [Of f ].
Use one-touch play
1  Af ter enabling EasyLink, press play on 
your device. 
The TV automatically switches to the    »
correct source.
Use one-touch standby
1 Press  (Standby-On) on the T V ’s or 
device’s remote control. 
The TV and all connected HDMI    »
devices switch to standby.
EN