Philips 22pfl3405 User Manual

							9
o  SOUND (Smart Sound)
Launches the sound menu.
p 
 +/- ( Volume +/-)
Increases or decreases volume.
q 
 BACK P/P (Previous channel)
Returns to a previous screen. • 
Returns to the previously viewed  • 
channel.
r 
 GUIDE
Switches between channel grid and 
programme list.
s  SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
t  DEMO (Used in selected models only)
Toggles the demonstration menu on or 
off.
u 
 FORMAT
Selects a picture format.
v 
 INCR. SURR
Enables Incredible Surround for stereo 
sources. Enables spatial mode for mono 
sources.
Remote control usage
When using the remote control, hold it close 
to the T V and point it at the remote control 
sensor. Make sure that the line-of-sight 
between the remote control and T V is not 
blocked by furniture, walls or other objects.
 
~5m
~30˚
English
EN
 
						

							10
Note
If you cannot locate your remote control and   •
want to switch on the T V from standby, press 
P/CH +/- on the side of the T V.
Switch channels
Press  • P +/- on the remote control or 
P/CH +/- on the side of the T V.
Enter a channel number using the  • 
Numeric buttons.
Press  • OK to use the channel grid.
Press  • 
 BACK P/P on the remote 
control to return to the previous channel. 
Note
When you use a favourite list, you can only   •
select those channels in the list (see ‘Select a 
favourite list’ on page 16).
Switch channels with the channel grid
The channel grid allows you to view all 
available channels in a grid format.
 
1 Press OK.
The channel grid appears.   »
2 Press  to browse the channel grid.
3 Press OK to select a channel.
4 Use your TV
This section helps you perform basic TV 
operations.
Switch your TV on / off or to 
standby
 
 
To switch on
If the standby indicator is off, press   • 
 (Power) at the side of the T V.
If the standby indicator is red, press   • 
 (Standby-On) on the remote control.
To switch to standby
Press  • 
 (Standby-On) on the remote 
control.
The standby indicator switches to red.   »
To switch off
Press  • 
 (Power) at the side of the T V.
The standby indicator switches off.   »
Tip
Though your T V consumes ver y lit tle power   •
when in standby, energy continues to be 
consumed. When not in use for an ex tended 
period of time, disconnect the TV power cable 
from the power outlet.
EN
 
						

							11
Use teletext
 
1 Press MHEG/TELETEXT.
The main index page appears.   »
2  Select a page as follows:
Press the  • Numeric buttons to enter 
a page number
Press  • P +/- to view the nex t or 
previous page
Press the  • Colour buttons to select a 
colour coded item
Press  • 
 BACK to return to a 
previously viewed page
3 Press MHEG/TELETEXT to exit teletext.
Watch connected devices
Note
Switch on the device before selecting it as a   •
source on the T V.
Use the source button
  
1 Press  SOURCE.
The source list appears.   »
2 Press  to select a device.
3 Press OK to confirm your choice.
The TV switches to the selected    »
device.
Adjust TV  volume
 
 
To increase or decrease volume
Press  • 
 +/-.
To mute or unmute sound
Press  • 
 to mute the sound.
Press  • 
 again to restore the sound.
English
EN
 
						

							12
Change picture and sound 
settings
Change picture and sound settings to suit your 
preferences. You can apply pre-defined settings 
or change settings manually.
Note
When watching T V or using ex ternal devices,   •
press  OPTIONS then select [Picture and 
sound] for quick access to picture and sound 
settings.
Use smart picture
Use smar t picture to apply pre-defined 
picture settings.
1 Press  PICTURE.
The    »[Smart picture] menu appears.
2 Press  to select one of the following 
settings.
• [Vivid]: Applies rich and dynamic 
settings.
5  Use more of 
your TV
Access TV  menus
Menus help you to install channels, change 
picture and sound settings and access other 
features.
1 Press  MENU.
The menu screen appears.   »
 
2 Press  to select and navigate 
through one of the following menus.
• [Picture] : Adjusts the picture setting 
for optimal viewing.
• [Sound] : Adjusts the sound setting.
• [Features] : Accesses different 
features like timer and T V lock.
• [Installation] : Selects channel 
installation menu, adjusts preferences 
and resets the T V to factor y settings.
• [Software update] : Updates the T V 
software.
3 Press OK to confirm your choice.
4 Press  MENU to exit.
Picture
Sound
Features
Installation
Software updateSmart picture
Video contrast
Contrast
Brightness
Colour
Hue
Sharpness
Noise reduction
EN
• [Standard]: Adjusts picture settings 
to suit most environments and types 
of video.
• [Cinema]: Applies settings for movie 
viewing.
• [Game]: Applies settings for games.
• [Energy saving]: Applies low-energy 
settings.
• [Natural]: Applies the best picture 
quality.
• [Custom]: Lists customised picture 
settings.
3 Press OK to confirm your choice.
The selected smar t picture setting is    »
applied.
 
						

							13
• [Picture size]: Adjusts the viewing area. 
(when set to maximum, you might see 
noise or a rough edge of an image.)
• [Horizontal shift]: Adjusts the picture 
horizontally for PC-VGA or HDMI input.
• [Vertical shift]: Adjusts the picture 
ver tically for PC-VGA or HDMI input.Manually adjust picture settings
1 Press  MENU.
2 Select [Picture] and press OK.
3 Press  to select the following 
settings.
• [Smart picture]: Accesses pre-defined 
smar t picture settings.
• [Video contrast]: Adjusts the intensity 
of video contents, keeping backlight 
unchanged.
• [Contrast]: Adjusts the intensity of 
backlight areas, keeping video contents 
unchanged.
• [Brightness]: Adjusts the intensity and 
details of dark areas.
• [Colour]: Adjusts colour saturation.
• [Hue]: Compensates for colour variations.
• [Sharpness]: Adjusts sharpness in the 
image.
• [Noise reduction]: Filters and reduces 
noise in an image.
• [Tint]: Adjusts the colour balance in an 
image. 
• [Custom tint]: Customises tint setting. 
(Only available if [Tint] > [Custom] is 
selected)
• [Digital Crystal Clear]: Fine-tunes each 
pixel to match surrounding pixels. This 
produces a brilliant, high-definition image.
• [Dynamic contrast]: Enhances 
contrast. A [Medium] setting is 
recommended.
• [Dynamic backlight]: Adjusts 
brightness of the T V backlight to 
match lighting conditions.
• [Colour enhancement]: Makes 
colours more vivid and improves 
the details in bright colours. You can 
switch this feature on or off.
• [PC mode]: Adjusts the picture when a 
PC is connected to the T V via HDMI or 
DVI.
• [Picture format]: Changes the picture 
format.
English
EN
 
						

							14
 
[Movie expand 16:9]: 
(Not for HD and PC 
mode.) Scales 4:3 format 
to 16:9.
 
[Wide screen]: Scales 4:3 
format to 16:9.
 
[Unscaled]: For HD 
and PC mode only, 
and in selected models 
only. Allows maximum 
sharpness. Some 
distor tion may be present 
due to the broadcaster’s 
systems. Set your PC 
resolution to wide screen 
mode for best results.
Use smart sound
Use smar t sound to apply pre-defined sound 
settings.
1 Press  SOUND.
The    »[Smart sound] menu appears.
2 Press  to select the following settings.
• [Standard] : Adjusts sound settings 
to suit most environments and types 
of audio.
• [News] : Applies settings for spoken 
audio, such as news.
• [Movie] : Applies settings for movies.
• [Custom] : Applies the settings that 
were customised in the sound menu.
3 Press OK to confirm your choice.
The selected smar t sound setting is    »
applied.
Change picture format
1 Press  FORMAT.
A picture format bar appears.   »
2 Press  to select a picture format.
The selected picture format is    »
activated.
3 Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be 
configured.
Note
Depending on the format of the picture   •
source, some picture set tings are not available.
EN
 
[Auto format]: (Not for 
PC mode.) Enlarges the 
picture automatically to 
best fit the screen. The 
subtitles remain visible.
 
[Super zoom]: (Not 
for HD and PC mode.) 
Removes the black bars on 
the side of 4:3 broadcasts. 
There is minimal 
distor tion.
 
[4:3]: Shows the classic 4:3 
format.
 
[Subtitle zoom]: (Not 
for HD and PC mode) 
Displays 4:3 pictures over 
the full area of the screen, 
with sub-titles visible. Par t 
of the top of the picture is 
clipped off.
 
[Movie expand 14:9]: (Not 
for HD and PC mode.) 
Scales 4:3 format to 14:9.
 
						

							15
Use advanced teletext 
features
Access the teletext options menu
Access the teletex t features through the 
teletex t options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears.   »
2 Press  OPTIONS.
The teletext options menu appears.   »
3 Press  to select one of the following 
options.
• [Freeze page] : Freezes the current 
page.
• [Reveal] : Hides or reveals hidden 
information on a page, such as 
solutions to riddles or puzzles.
• [Cycle subpage] : Cycles through 
subpages automatically if subpages 
are available.
• [Language] : Switches to a different 
language group to display a language 
correctly when it uses a different 
character set.
4 Press  to make a selection, then 
press OK to confirm.
5 Press  BACK to exit the teletex t 
options menu.
Select teletext subpages
A teletex t page can hold several subpages. 
Subpages are displayed on a bar nex t to the 
main page number.
1 Press MHEG/TELETEXT.
The teletext screen appears.   »
2 Press P +/- to select a teletex t page.
3 Press  to enter a subpage.
Manually adjust sound settings
1 Press  MENU.
2 Press  to select [Sound] and press 
OK.
3 Press  to select the following 
settings.
• [Smart sound] : Accesses pre-
defined smar t sound settings.
• [Bass] : Adjusts the bass level.
• [Treble] : Adjusts the treble level.
• [Volume] : Adjusts the volume.
• [Balance] : Adjusts the balance of the 
right and lef t speakers.
• [Dual I-II] : Selects audio languages if 
dual sound broadcast is available.
• [Mono/Stereo] : Selects mono 
or stereo if stereo broadcast is 
available.
• [Surround] : Enables spatial sound.
• [Headphone volume] : Adjusts 
headphone volume. (Available only 
when the headphones are connected 
to the T V ).
• [Auto volume levelling] : 
Automatically reduces sudden 
volume changes, for example, when 
switching channels. 
• [Delta volume] : Levels out volume 
differences between channels or 
connected devices. Switch to the 
connected device before you change 
the delta volume.
English
EN
 
						

							16
View all channels
You can exit a favourite list, and view all 
installed channels.
1  When watching T V, press OK.
The channel grid appears.   »
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Select list], then 
press OK or 
 to enter.
4 Select [All], then press OK. 
All channels are displayed in the    »
channel grid.
Note
All favourite channels are marked by an   •
asterisk when you view the channel grid.
Add a channel to a favourite list
1  When watching T V, press OK.
The channel grid appears.   »
2 Press  to select a channel to add to 
a favourite list.
3 Press  OPTIONS.
The channel options menu appears.   »
4 Select [Mark as favourite], then press 
OK.
The channel is added to the favourite    »
list.
Note
All favourite channels are marked by an   •
asterisk in the channel grid.
Select T.O.P. teletext broadcasts
Table Of Pages ( T.O.P.) teletex t broadcasts 
allow you to jump from one subject to 
another without using page numbers. T.O.P. 
teletex t is not broadcast on all T V channels.
1 Press MHEG/TELETEXT.
The teletext screen appears.   »
2 Press  INFO.
The T.O.P. over view appears.   »
3 Press  to select a subject.
4 Press OK to view the page.
Create and use list of 
favourite channels
You can create a list of your preferred TV 
channels so that you can find those channels 
easily.
Select a favourite list
1  When watching T V, press OK to display 
the channel grid.
2 Press  OPTIONS.
The channel options menu appears.   »
3 Press  to select [Select list], then 
press OK to enter.
The channel list options appear.   »
4 Select [Favourite], then press OK.
Only channels in the favourite list    »
appear in the channel grid.
Note
The favourite channel grid is empty until you   •
add channels into the favourite lists.
EN
 
						

							17
Use timers
You can set timers to switch the TV to standby 
at a specified time.
Tip
Set the T V clock before you use timers.  •
Automatically switch the TV to 
standby (sleep timer)
Sleep timer switches the T V to standby af ter a 
pre-defined period of time.
Tip
You can switch off your T V earlier or reset the   •
sleep timer during the countdown.
1 Press  MENU.
2 Press  to select [Features] > 
[Sleep timer].
The    »[Sleep timer] menu appears.
3 Press  to select a value between zero 
and 180 minutes. 
The sleep timer can be set in steps of    »
five minutes. If set to zero, the sleep 
timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the    »
specified time.
Remove a channel from a favourite 
list
1  When watching T V, press OK.
The channel grid appears.   »
2 Press  to select a channel to 
remove.
3 Press  OPTIONS.
4 Select [Unmark as favourite], then press 
OK.
The channel is removed.   »
Use the TV clock
You can display a clock on the TV screen. 
Set the TV clock
1 Press  MENU.
2 Press  to select [Features] > 
[Clock]
The    »[Clock] menu appears.
3 Press  to enter time.
4 Select [Done] and press OK to confirm.
5 Press  MENU to exit.
Display the TV clock
1  When watching T V, press  OPTIONS.
The TV option menu appears.   »
2 Select [Clock].
3 Press OK.
English
EN
 
						

							18
Use TV  locks
You can prevent your children from watching 
cer tain programmes or channels by locking the 
TV controls. 
Set or change your PIN code
1 Press  MENU.
2 Press  to select [Features] > [Set 
code] / [Change code].
The    »[Set code] / [Change code] menu 
appears.
3  Enter your code using the Numeric 
buttons.
Follow the on-screen instructions to    »
create or change your PIN code.
Tip
If you forget your code, enter ‘8888’ to   •
override any existing codes.
Lock or unlock the TV
Lock the T V to prevent access to all channels 
and connected devices.
1 Press  MENU.
2 Press  to select [Features] > [TV 
lock].
You are prompted to enter your PIN    »
code.
3  Enter your code using Numeric buttons.
The    »[TV lock] menu appears.
4 Press  to select [Lock] or [Unlock].
5 Press OK to confirm.
All channels and connected devices are    »
locked or unlocked.
6 Press  MENU to exit.
Note
Switch the T V off and on again for the change   •
to take effect.
If you select 
  •[Lock], you have to enter your 
code ever y time you turn on your T V.
Automatically switch the TV on (on 
timer)
You can switch on the T V from standby to a 
specific channel at a specified time.
1 Press  MENU.
2 Press  to select [Features] > [On 
timer].
3 Press  to enter the [On timer] menu.
• [Activate]: Selects how of ten the T V 
is switched on.
• [Time]: Sets the time to switch on 
the T V.
• [Programme no.]: Selects the 
channel or the connected device.
4 Press  MENU to exit.
Tip
Select   •[On timer] > [Activate] > [Of f ] to 
disable this feature. 
When 
  •[On timer] is switched off, only 
[Activate] option is available.
EN