Philips 226c2sb User Manual

							 Note
A red or blue bright dot must be more than 50 
percent brighter than neighboring dots while  
a green bright dot is 30 percent brighter than 
neighboring dots.
Black Dot Defects Black dot defects appear as 
pixels or sub pixels that are always dark or 'off'. 
That is, a dark dot is a sub-pixel that stands out 
on the screen when the monitor displays a light 
pattern. These are the types of black dot defects:
Proximity of Pixel Defects 
Because pixel and sub pixels defects of the same 
type that are near to one another may be more 
noticeable, Philips also specifies tolerances for the 
proximity of pixel defects. 
Pixel Defect Tolerances 
In order to qualify for repair or replacement due 
to pixel defects during the warranty period, a TFT 
LCD panel in a Philips flat panel monitor must 
have pixel or sub pixel defects exceeding the 
tolerances listed in the following tables.
   BRIGHT DOT DEFECTSACCEPTABLE LEVEL
  MODEL  
   1 lit subpixel3
   2 adjacent lit subpixels1
   3 adjacent lit subpixels (one white pixel)0
  Distance between two bright dot defects*>15mm
   Total bright dot defects of all types3
   BLACK DOT DEFECTSACCEPTABLE LEVEL
  MODEL
   1 dark subpixel5 or fewer
   2 adjacent dark subpixels2 or fewer
   3 adjacent dark subpixels0
  Distance between two black dot defects*>15mm
   Total black dot defects of all types5 or fewer
   TOTAL DOT DEFECTSACCEPTABLE LEVEL
  MODEL
    Total bright or black dot defects of all types5 or fewer
 Note 
1 or 2 adjacent sub pixel defects = 1 dot defect
This monitor is ISO9241-307 compliant.
226C2/226CL2
  226C2/226CL2
  226C2/226CL2
19
 
						

							
4  Technical Specifications

   Picture/Display
   LCD panel type			TFT-LCD
   Backlight 
   Panel size
			 Aspect 	 ratio			16:9
   Pixel Pitch   0.248 x 0.248 mm
   Brightness   250 cd/m² 
   Response time (typical) 
   Optimum Resolution   1920x1080 @ 60Hz
    Viewing angle
   Picture Enhancement
   Display colors 			16.7	M
    Ver tical refresh rate
			Horizontal	Frequency
   sRGB				YES
   Connectivity
   Signal input			DVI-D	(digital,	HDCP),	VGA	(Analog)
   Input Signal   Separate Sync, Sync on Green
   Convenience
   User Convenience
,  Input/
,
				
Power
	
On/Off
	
,
			
   OSD Languages			English,	French,	German,	Italian,	Russian,	Spanish,	
   Simplified Chinese, Por tuguese
   Other convenience			Kensington	lock
   Plug & Play Compatibility
   Stand
   Tilt 


			226CL2(White-LED) ;226C2(CCFL)
   21.5" W
			170°	(H)	/	160°	(V)	@	C/R	>	10
   56Hz -76Hz 
   30kHz - 83kHz
		Turbo/back,
226C2/226CL2
    Smar tImage /			Windows	7	
   -5/+20    Smar tImage     2 ms
20Menu (OK)
 
						

							
   On mode
   Energy Consumption
   (EnergyStar 5.0 test method) 
		AC 	 Input 	 Voltage 	 at 		
	100VAC 	 +/-5VAC, 	
  50Hz +/- 3Hz
		AC 	 Input 	 Voltage 	 at
		115VAC 	 +/-5VAC, 	
  60Hz +/- 3Hz
		AC 	 Input 	 Voltage 	 at
		230VAC 	 +/-5VAC,
  50Hz +/ -3Hz
   Normal Operation (typcial) 
   Sleep
   Off
   Heat Dissipation*		AC 	 Input 	 Voltage 	 at 	
		100VAC 	 +/-5VAC,
  50Hz +/ -3Hz
		AC 	 Input 	 Voltage 	 at
		115VAC 	 +/-5VAC, 	
  60Hz +/ -3Hz
		AC 	 Input 	 Voltage 	 at 	
		230VAC 	 +/-5VAC, 	
  50Hz +/ -3Hz
   Normal Operation  73.48BTU/hr   73.07BTU/hr  73.00BTU/hr 
   Sleep  1.47BTU/hr  1.43BTU/hr  1.47BTU/hr
   Off  1.43BTU/hr  1.43BTU/hr  1.47BTU/hr
   On mode
   Energy Consumption
   (EnergyStar 5.0 test method) 
		AC 	 Input 	 Voltage 	 at 		
	100VAC 	 +/-5VAC, 	
  50Hz +/- 3Hz
		AC 	 Input 	 Voltage 	 at
		115VAC 	 +/-5VAC, 	
  60Hz +/- 3Hz
		AC 	 Input 	 Voltage 	 at
		230VAC 	 +/-5VAC,
  50Hz +/ -3Hz
   Normal Operation (typcial) 
   Sleep
   Off
   Heat Dissipation*		AC 	 Input 	 Voltage 	 at 	
		100VAC 	 +/-5VAC,
  50Hz +/ -3Hz
		AC 	 Input 	 Voltage 	 at
		115VAC 	 +/-5VAC, 	
  60Hz +/ -3Hz
		AC 	 Input 	 Voltage 	 at 	
		230VAC 	 +/-5VAC, 	
  50Hz +/ -3Hz
   Normal Operation  75.52BTU/hr   75.48BTU/hr   73.07BTU/hr 
   Sleep  1.47BTU/hr  1.43BTU/hr  1.71BTU/hr
   Off  1.43BTU/hr  1.43BTU/hr  1.67BTU/hr
   Power LED indicator		On 	 mode: 	 White, 	 Standby/Sleep 	 mode: 	 White 	 (blinking)
   Power Supply

   Power (226C2)
  25W (typical)
  22.53W  22.41W  22.39W
  0.36W   0.35W   0.36W
  0.24W   0.24W   0.26W
   Power (226CL2)
  23W
  17.52.W  17.68W   17.41W
  0.36W   0.34W   0.35W
  0.24W   0.26W   0.25W
		AC	Adapter,1.2V==3.33A
21
 
						

							   Dimension
   Product with stand (WxHxD) 
   Product without stand
   (WxHxD) 
   Box dimension (WxHxD)
   Weight
   Product with stand  
   Product without stand 
   Product with packaging 
   Operating Condition
  -20°C to 60°C 
   Relative humidity  20% to 80%
			Altitude
			MTBF
   Environmental
   ROHS 		YES
			EPEAT  Silver. (www.epeat.net)
   Packaging  100% recyclable
   Compliance and standards
				Regulator y	Approvals
   Cabinet
   Color  Black/Black
			Finish  Glossy/Texture
 Note 
This data is subject to change without notice. 
Go to www.philips.com/suppor t to download the latest version of leaflet.
/,,
  515 x399 x198mm  
  515x327x43mm 
  562x467x109mm  
   Temperature range (Non-operation) 
		Non-operation:	+	40,000	ft	(	12,192m) 
		operation:	+	12,000	ft	(	3,658m) 
  0°C to 35 °C 
  50 000hrs(226C2 )  30 000hrs(226CL2)
   Temperature range (operation)
			FCC, ICES, SASO,TÜV	S-mark, Enersy star 5.0, SABS 
		CB, TÜV/	ISO, SEMKO, GOST, CCC, BSMI, KUCAS, UL/CUL,	
22 
3.31kg(226C2) / 2.96kg(226CL2)  
3.16Kg(226C2) / 2.81Kg(226CL2)   
4.85kg(226C2) / 4.5kg(226CL2)  
 
						

							
4.1  Resolution & Preset Modes4.2  Automatic PowerSaving
If	 you 	 have 	 VESA 	 DPM 	 compliance 	 display 	 card 	
or  software  installed  in  your  PC,  the  monitor  can 
automatically reduce its power consumption when 
not  in  use.  If  an  input  from  a  keyboard,  mouse  or 
other  input  device  is  detected,  the  monitor  will 
'wake  up'  automatically. The  following  table  shows 
the  power  consumption  and  signaling  of  this 
automatic	 power 	 saving 	 feature: 

	 Maximum	 Resolution
 1920 x 1080 at 60 Hz (analog input) 
 1920 x 1080 at 60 Hz (digital input)

 Recommended Resolution
 For 	
  1920 x 1080 at 60 Hz (digital input)

H. freq (kHz)ResolutionV. freq (Hz)
31.47 640x480 59.94 
37.88 800x600 60.32 
48.36 1024x768 60.00 
54.00 1152x864 60.00 
44.77 1280x720 59.86 
47.78 1280x768 59.87 
49.70 1280x800 59.81 
60.00 1280x960 60.00 
63.89 1280x1024 60.02 
47.71 1360x768 60.02 
55.47 1440x900 59.90 
55.94 1440x900 59.89 
75.00 1600x1200 60.00 
64.67 1680x1050 59.88 
65.29 1680x1050 59.95 
66.59 1920x1080 59.93 
74.04 1920x1200 59.95 
67.50 1920x1080 60.00 

Power 	 Management 	 DefinitionVESA	Mode 	Video H-sync V-sync Power UsedLED color 
Active 	ON YesYesWhite
Sleep OFFNoNo
White (blink) Switch OffOFF--< 0.5 W (typ.)OFF

 Note 
This data is subject to change without notice.       
The  following  setup  is  used  to  measure  power 
consumption on this monitor.
Native 	 resolution: 	 1920 	 x 	 1080
Contrast:	 50%
Brightness: 	 250 	 nits
Color	 temperature: 	 6500k 	 with 	 full 	 white 	 pattern
Audio	 (Off)

For	226CL2/226C2
226CL2/226C2
226C2< 25 W (typ.)
226CL2< 23 W (typ.)
23
< 0.5 W (typ.) 
 
						

							
5  Regulatory Information

Lead-free Product

Lead free display promotes 
environmentally sound recover y and 
disposal of waste from electrical and 
electronic equipment. Toxic substances 
like Lead has been eliminated and compliance 
with European community’s stringent RoHs 
directive mandating restrictions on hazardous 
substances in electrical and electronic equipment 
have been adhered to in order to make Philips 
monitors safe to use throughout its life cycle.
EPEAT (www.epeat.net)

“The 	 EPEAT 	 (Electronic 	 Product 	
Environmental	 Assessment 	 Tool) 	
program evaluates computer 
desktops, laptops, and monitors 
based on 51 environmental criteria 
developed through an extensive 
stakeholder consensus process 
suppor ted	 by 	 US 	 EPA.
EPEAT	 system 	 helps 	 purchasers 	 in 	 the 	 public 	
and private sectors evaluate, compare and select 
desktop computers, notebooks and monitors 
based	 on 	 their 	 environmental 	 attributes. 	 EPEAT 	
also provides a clear and consistent set of 
performance criteria for the design of products, 
and provides an oppor tunity for manufacturers to 
secure market recognition for effor ts to reduce 
the environmental impact of its products.”
Benefits	 of 	 EPEAT
Reduce use of primar y materials
Reduce use of toxic materials
Avoid	 the 	 disposal 	 of 	 hazardous 	 waste 	 EPEAT’S 	
requirement that all registered products meet 
ENERGY	 STAR’s 	 energy 	 efficiency 	 specifications, 	
means that these products will consume less 
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following 
standards 
•	 EN60950-1:2006	 (Safety 	 requirement 	 of 	 	
 Information Technology Equipment) 
•	 EN55022:2006 	 (Radio 	 Disturbance 	 	 	
 requirement of Information Technology   
 Equipment) 
•	 EN55024:1998+A1:2001+A2:2003 	 		
 (Immunity requirement of Information   
  Technology Equipment) 
•	 EN61000-3-2:2006 	 (Limits 	 for 	 Harmonic 	 	
 Current Emission) 
•	 EN61000-3-3:1995+A1:2001+A2:2005 	 	
	 (Limitation	 of 	 Voltage 	 Fluctuation 	 and 	 Flicker)
 following provisions of directives applicable
•	 2006/95/EC 	 (Low 	 Voltage 	 Directive) 	
•	 2004/108/EC	 (EMC 	 Directive) 	
•	 2005/32/EC	 (EuP 	 Directive, 	 EC 	 No. 	 		
 1275/2008 mplementing Directive for   
 Standby and Off mode power consumption)   
 and is produced by a manufacturing    
 organization on ISO9000 level. 
 The product also comply with the following   
 standards 
•	 ISO9241-307:2008 	 (Ergonomic 	 requirement, 	 	
	 Analysis	 and 	 compliance 	 test 	 methods 	 for 	 	
 electronic visual displays)  
•	 GS 	 EK1-2000:2009 	 (GS 	 mark 	 requirement) 		
•	 prEN50279:1998	 (Low 	 Frequency 	 Electric 	 	
	 and	 Magnetic 	 fields 	 for 	 Visual 	 Display) 	
•	 MPR-II	 (MPR:1990:8/1990:10 	 Low 	 Frequency 	 	
	 Electric	 and 	 Magnetic 	 fields) 	
This monitor is equipped with a function for saving 
energy	 which 	 suppor ts 	 the 	 VESA 	 Display 	 Power 	
Management	 (DPM) 	 standard. 	 This 	 means 	 that 	 the 	
monitor must be connected to a computer which 
suppor ts	 VESA 	 DPM. 	 Time 	 settings 	 are 	 adjusted 	
from the system unit by software.

24
 
						

							
As	 an 	 ENERGY 	 STAR® Par tner, 
we have determined that this 
product	 meets 	 the 	 ENERGY 	 STAR® 
guidelines for energy efficiency.

 Note
We recommend you switch off the monitor when 
it is not in use for a long time.

VESA	 StateLED IndicatorPower Consumption Normal  operationON	 (Active)White
 Power Saving	Alternative 	 2 One step
SleepSwitch OffWhite(blink) OFF
Federal Communications Commission (FCC) 
Notice (U.S. Only)

 This equipment has been tested and found   
 to comply with the limits for a Class B digital   
	 device,	 pursuant 	 to 	 Par t 	 15 	 of 	 the 	 FCC 	
 Rules. These limits are designed to     
 provide reasonable protection against   
 harmful interference in a residential     
 installation. This equipment generates, uses   
 and can radiate radio frequency energy and,   
 if not installed and used in accordance with
 the instructions, may cause harmful     
 interference to radio communications.   
 However, there is no guarantee that    
 interference will not occur in a par ticular   
 installation. If this equipment does cause   
 harmful interference to radio or television   
 reception, which can be determined by   
 turning the equipment off and on, the user 
 is encouraged to tr y to correct the     
 interference by one or more of the following   
	 measures:
•	 Reorient	 or 	 relocate 	 the 	 receiving 	 antenna. 	
•	 Increase	 the 	 separation 	 between 	 the 	 	
 equipment and receiver. 
•	 Connect 	 the 	 equipment 	 into 	 an 	 outlet 	 on 	 	
 a circuit different from that to which the   
 receiver is connected. 
•	 Consult 	 the 	 dealer 	 or 	 an 	 experienced 	 radio/	
 TV technician for help.

 Changes or modifications not expressly   
 approved by the par ty responsible for   
 compliance could void the user's authority   
 to operate the equipment.
Use	 only 	 RF 	 shielded 	 cable 	 that 	 was 	 supplied 	 with 	
the monitor when connecting this monitor to a 
computer device. 
To prevent damage which may result in fire or 
shock hazard, do not expose this appliance to rain 
or excessive moisture. 
THIS	 CLASS 	 B 	 DIGITAL 	 APPARATUS 	 MEETS 	
ALL	 REQUIREMENTS 	 OF 	 THE 	 CANADIAN 	
INTERFERENCE-CAUSING	 EQUIPMENT 	
REGULATIONS.FCC Declaration of Conformity
Declaration	 of 	 Conformity 	 for 	 Products 	 Marked 	
with	 FCC 	 Logo, 	
United States Only
This	 device 	 complies 	 with 	 Par t 	 15 	 of 	 the 	 FCC 	
Rules. Operation is subject to the following two 
conditions:	 (1) 	 this 	 device 	 may 	 not 	 cause 	 harmful 	
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation. Commission 
Federale de la Communication (FCC 
Declaration)

 Cet équipement a été testé et déclaré   
 conforme auxlimites des appareils     
 numériques de class B,aux termes de   
	 l'ar ticle	 15 	 Des 	 règles 	 de 	 la 	 FCC . 	 Ces 	 limites 	 	
 sont conçues de façon à fourir une  
 protection raisonnable contre les     
 interférences nuisibles dans le cadre    
 d'une installation résidentielle. 

226C2< 25 W (typ.)
226CL2< 23 W (typ.)
< 0.
5 W (typ.)
25
< 0.5 W (typ.)
 
						

							
 CET appareil produit, utilise et peut émettre   
 des hyperfréquences qui, si l'appareil   
 n'est pas installé et utilisé selon les consignes   
 données, peuvent causer des interférences   
 nuisibles aux communications radio. 
 Cependant, rien ne peut garantir l'absence   
 d'interférences dans le cadre d'une     
 installation par ticulière. Si cet appareil est la   
 cause d'interférences nuisibles pour la   
 réception des signaux de radio ou de   
 télévision, ce qui peut être décelé en fermant   
 l'équipement, puis en le remettant en   
 fonction, l'utilisateur pourrait essayer de   
 corriger la situation en prenant les mesures   
	 suivantes:
•	 Réorienter	 ou 	 déplacer 	 l'antenne 	 de 	 	
 réception. 
•	 Augmenter 	 la 	 distance 	 entre 	 l'équipement 	 et 	 	
 le récepteur. 
•	 Brancher 	 l'équipement 	 sur 	 un 	 autre 	 circuit 	 	
 que celui utilisé par le récepteur. 
•	 Demander 	 l'aide 	 du 	 marchand 	 ou 	 d'un 	 	
 technicien chevronné en radio/télévision.
 Toutes modifications n'ayant pas reçu   
 l'approbation des ser vices compétents en   
 matière de conformité est susceptible   
 d'interdire à l'utilisateur l'usage du présent   
 équipement.
N'utiliser 	 que 	 des 	 câbles 	 RF 	 armés 	 pour 	 les 	
connections avec des ordinateurs ou 
périphériques. 
CET	 APPAREIL 	 NUMERIQUE 	 DE 	 LA 	 CLASSE 	
B RESPECTE TOUTES LES EXIGENCES DU 
REGLEMENT	 SUR 	 LE 	 MATERIEL 	 BROUILLEUR 	
DU	 CANADA. 	

EN 55022 Compliance (Czech Republic Only)
Polish Center for Testing and Certification 
Notice
The equipment should draw power from a socket 
with an attached protection circuit (a three-
prong	 socket). 	 All 	 equipment 	 that 	 works 	 together 	
(computer, monitor, printer, and so on) should 
have the same power supply source.
The phasing conductor of the room's electrical 
installation should have a reser ve shor t-circuit 
protection device in the form of a fuse with a 
nominal	 value 	 no 	 larger 	 than 	 16 	 amperes 	 (A).
To completely switch off the equipment, the 
power supply cable must be removed from the 
power supply socket, which should be located 
near the equipment and easily accessible.
A	 protection 	 mark 	 "B" 	 confirms 	 that 	 the 	
equipment is in compliance with the protection 
usage requirements of standards PN-93/T-42107 
and PN-89/E-06251.

26
 
						

							
North Europe (Nordic Countries) Information

Placering/Ventilation 
VARNING:
FÖRSÄKRA	 DIG 	 OM 	 ATT 	 HUVUDBRYTARE 	
OCH	 UTTAG 	 ÄR 	 LÄTÅTKOMLIGA, 	 NÄR 	 DU 	
STÄLLER	 DIN 	 UTRUSTNING 	 PÅPLATS.
Placering/Ventilation ADVARSEL: 
S Ø R G	 V E D 	 P L A C E R I N G E N 	 F O R , 	 A T 	NETLEDNINGENS	 STIK 	 OG 	 STIKKONTAKT 	 ER 	NEMT	 TILGÆNGELIGE. 	
Paikka/Ilmankier to VAROITUS: 
SIJOITA	 LAITE 	 SITEN, 	 ETTÄ 	 VERKKOJOHTO 	V O I D A A N	 TA R V I T TA E S S A 	 H E L P O S T I 	IRROTTAA	 PISTORASIASTA. 	
Plassering/Ventilasjon ADVARSEL: N Å R	 D E T T E 	 U T S T Y R E T 	 P L A S S E R E S , 	 M Å 	D U	 PA S S E 	 P Å 	 AT 	 K O N TA K T E N E 	 F O R 	STØMTILFØRSEL	 ER 	 LETTE 	 Å 	 NÅ.
BSMI Notice (Taiwan Only)
Ergonomie Hinweis (nur Deutschland)
Der	 von 	 uns 	 geliefer te 	 Farbmonitor 	 entspricht 	 den 	
in der "Verordnung über den Schutz vor Schäden 
durch Röntgenstrahlen" festgelegten Vorschriften. 
Auf	 der 	 Rückwand 	 des 	 Gerätes 	 befindet 	 sich 	
ein	 Aufkleber, 	 der 	 auf 	 die 	 Unbedenklichkeit 	 der 	
Inbetriebnahme hinweist, da die Vorschriften über 
die	 Bauar t 	 von 	 Störstrahlern 	 nach 	 Anlage 	 III 	 ¤ 	 5 	
Abs.	 4 	 der 	 Röntgenverordnung 	 erfüllt 	 sind. 	
Damit	 Ihr 	 Monitor 	 immer 	 den 	 in 	 der 	 Zulassung 	
geforder ten Wer ten entspricht, ist darauf zu 
achten, daß 
1.	 Reparaturen	 nur 	 durch 	 Fachpersonal 	 	
 durchgeführ t werden. 
2.  nur original-Ersatzteile verwendet werden. 
3.  bei Ersatz der Bildröhre nur eine     
 bauar tgleiche eingebaut wird. 

Aus 	 ergonomischen 	 Gründen 	 wird 	 empfohlen, 	die Grundfarben Blau und Rot nicht auf dunklem Untergrund  zu  verwenden  (schlechte  Lesbarkeit und	 erhöhte 	 Augenbelastung 	 bei 	 zu 	 ger ingem 	Zeichenkontrast	 wären 	 die 	 Folge). 	Der  arbeitsplatzbezogene  Schalldruckpegel  nach DIN	 45 	 635 	 beträgt 	 70dB 	 (A) 	 oder 	 weniger. 	

ACHTUNG:	 BEIM 	 AUFSTELLEN 	DIESES	 GERÄTES 	 DARAUF 	ACHTEN,	 DAß 	 NETZSTECKER 	 UND 	NETZKABELANSCHLUß	 LEICHT 	ZUGÄNGLICH	 SIND. 	

27
 
						

							
China RoHS 
The People's Republic of China released a 
regulation	 called 	 "Management 	 Methods 	 for 	
Controlling Pollution by Electronic Information 
Products" or commonly referred to as China 
RoHS.	 All 	 products 	 including 	 CRT 	 and 	 LCD 	
monitor which are produced and sold for China 
market have to meet China RoHS request.

环保使用期限 
此标识指期限(十年),电子信息产品中含有的
有毒有害物质或元素在正常使用的条件下不
会发生外泄或突变,  电子信息产品用户使用该
电子信息产品不会对环境造成严重污染或对
其人身、 财产造成严重损害的期限．

28