Philips 226c2sb User Manual

Contact the Philips Customer Care Center phone 
number listed below for product assistance and 
procedures	 for 	 ser vicing: 	
Philips Customer Care Center 
(877) 835-1838 or (919) 573-7855
(In	 U.S.A., 	 Puer to 	 Rico 	 and 	 U.S. 	 Virgin 	 Islands, 	 all 	
implied warranties, including implied warranties 
of merchantability and fitness for a par ticular 
purpose, are limited in duration to the duration 
of this express warranty. But, because some states 
do not allow limitations on how long an...

Your International Guarantee
Dear Customer,
Thank you for purchasing this Philips product 
which has been designed and manufactured to the 
highest quality standards. 
If, unfor tunately, something should go wrong with 
this product Philips guarantees free of charge labor 
and replacement par ts irrespective of the countr y 
where it is repaired during a period of 12 months 
from date of purchase. This international Philips 
guarantee complements the existing national 
guarantee obligations to you of...

7.1  Troubleshooting
This page deals with problems that can be 
corrected by a user. If the problem still persists 
after you have tried these solutions, contact Philips 
customer ser vice representative.

 Common Problems
No Picture (Power LED not lit)
•	 Make 	 sure 	 the 	 power 	 cord 	 is 	 plugged 	 into 	 	
 the power outlet and into the back of the   
 monitor. 
•	 First, 	 ensure 	 that 	 the 	 power 	 button 	 on 	 the 	 	
	 front	 of 	 the 	 monitor 	 is 	 in 	 the 	 OFF 	 position, 	 	
 then...

Horizontal flicker appears
•	 Adjust	 the 	 image 	 using 	 the 	 “Auto” 	 function 	 	
	 in	 OSD 	 Main 	 Controls. 	
•	 Eliminate	 the 	 ver tical 	 bars 	 using 	 the 	 Phase/	
	 Clock	 of 	 Setup 	 in 	 OSD 	 Main 	 Controls. 	 It 	 is 	 	
	 valid	 only 	 in 	 VGA 	 mode.
Image appears blurred, indistinct or too dark
•	 Adjust	 the 	 contrast 	 and 	 brightness 	 on 	
 On-Screen Display.
An "after-image", "burn-in" or "ghost image" 
remains after the power has been turned...

7.2  SmartControl Premium FAQs
Q1.   I change the monitor on a PC to a  
    different one and the SmartControl  
    Premium becomes un-usable,  what do I  
    do?
Ans.:  Restar t your PC and see if Smar tControl  
  Premium can work. Otherwise, you will  
    need to remove and re-install Smar tControl  
   Premium to ensure proper driver is installed.
Q2.   The SmartControl Premium functions  
    worked well before, but it does not work  
    anymore, what can I do?
Ans.:  If the following actions...

Q6.   In a monitor with the Smartlmage  
    feature, the sRGB scheme of color  
    temperature function in SmartControl  
    Premium is not responding, why?
Ans.: When Smar tlmage is enabled, the sRGB  
    scheme is disabled automatically. To use  
    sRGB, you need to disable Smar tlmage with  
    the 
 button at the front bezel of your  
    monitor.  
44
 

7.3  General FAQs
Q1:    When I install my monitor what should I   
   do if the screen shows 'Cannot display this   
   video mode'?
Ans.:	 Recommended 	 resolution 	 for 	 Philips 	 21.5": 	 	
   1920 x 1080 @60Hz.
 • Unplug all cables, then connect your PC to   
   the monitor that you used previously. 
 • In	 the 	 Windows 	 Star t 	 Menu, 	 select 	 Settings/	
   Control Panel. In the Control Panel Window,   
   select the Display icon. Inside the Display
   Control Panel, select the...

Q7:   How should I clean the LCD surface?
Ans.:	 For	 normal 	 cleaning, 	 use 	 a 	 clean, 	 soft 	 cloth. 	 	
	 	 For	 extensive 	 cleaning, 	 please 	 use 	 isopropyl 	 	
   alcohol. Do not use other solvents such as   
   ethyl alcohol, ethanol, acetone, hexane, etc. 
Q8:   Can I change the color setting of my   
   monitor?
Ans.:	 Yes,	 you 	 can 	 change 	 your 	 color 	 setting 	 	
   through OSD control as the following   
   procedures,
 • Press	 "OK" 	 to 	 show 	 the 	 OSD 	 (On...

Q12:   What is Image Sticking, or Image    
   Burn-in, or After Image, or Ghost Image in   
   LCD panels? 
Ans.: Uninterrupted display of still or static images   
   over an extended period may cause 
   "burn in", also known as "after-imaging" or   
   "ghost imaging", on your screen. "Burn-in", 
   "after-imaging", or "ghost imaging" is a 
   well-known phenomenon in LCD panel 
   technology. In most cases, the "burned in" or...

2010 © Koninklijke Philips Electronics N.V.   All r ights reser ved.
Philips and the Philips Shield Em blem are registered t radema rks of 
Koninklijke Philips Electronics N. V. and are used under license from 
Koninklijke Philips Elec tronics N.V.
Specif ications are subject to change without notic e.
Version:

 M22 2 F
6EC1
48