Philips 221e2sb User Manual

							19
   Power (221E2)
   On mode  24W (typical)
   Energy Consumption
   (EnergyStar 5.0 test method) 
		AC	Input	 Voltage	at		
	100VAC	+/-5VAC, 	
  50Hz +/- 3Hz
		AC	Input	 Voltage	at
		115VAC	+/-5VAC, 	
  60Hz +/- 3Hz
		AC	Input	 Voltage	at
		230VAC	+/-5VAC,
  50Hz +/ -3Hz
   Normal Operation (typcial)   21.53W  21.41W  21.39W
   Sleep  0.43W  0.42W  0.43W
   Off  0.42W  0.42W  0.43W
   Heat Dissipation*		AC	Input	 Voltage	at	
		100VAC	+/-5VAC,
  50Hz +/ -3Hz
		AC	Input	 Voltage	at
		115VAC	+/-5VAC, 	
  60Hz +/ -3Hz
		AC	Input	 Voltage	at	
		230VAC	+/-5VAC, 	
  50Hz +/ -3Hz
   Normal Operation  73.48BTU/hr   73.07BTU/hr  73.00BTU/hr 
   Sleep  1.47BTU/hr  1.43BTU/hr  1.47BTU/hr
   Off  1.43BTU/hr  1.43BTU/hr  1.47BTU/hr
   Power (221EL2)
   On mode  23.8W (typical)
   Energy Consumption
   (EnergyStar 5.0 test method) 
		AC	Input	 Voltage	at		
	100VAC	+/-5VAC, 	
  50Hz +/- 3Hz
		AC	Input	 Voltage	at
		115VAC	+/-5VAC, 	
  60Hz +/- 3Hz
		AC	Input	 Voltage	at
		230VAC	+/-5VAC,
  50Hz +/ -3Hz
   Normal Operation (typcial)   18.05W  18.04W  18W
   Sleep  0.43W  0.42W  0.41W
   Off  0.42W  0.42W  0.40W
   Heat Dissipation*		AC	Input	 Voltage	at	
		100VAC	+/-5VAC,
  50Hz +/ -3Hz
		AC	Input	 Voltage	at
		115VAC	+/-5VAC, 	
  60Hz +/ -3Hz
		AC	Input	 Voltage	at	
		230VAC	+/-5VAC, 	
  50Hz +/ -3Hz
   Normal Operation  75.52BTU/hr   75.48BTU/hr   73.07BTU/hr 
   Sleep  1.47BTU/hr  1.43BTU/hr  1.71BTU/hr
   Off  1.43BTU/hr  1.43BTU/hr  1.67BTU/hr
   Power LED indicator		On	mode:	White, 	Standby/Sleep	mode: 	White	(blinking)
   Power Supply		 AC	 Adapter,1.2V==3.0A
 
						

							
20

   Dimension
   Product with stand (WxHxD)   526 x376 x188mm 
   Product without stand
   (WxHxD) 
  526x370x42mm
   Box dimension (WxHxD)  578x436x134mm 
   Weight
   Product with stand    3.10kg 
   Product without stand   3.0kg
   Product with packaging   4.36kg
   Operating Condition
   Temperature range (operation)  0°C to 40 °C
   Temperature range (operation)   -20°C to 60°C 
   Relative humidity  20% to 80%
			Altitude		Non-operation: 	 + 	 12,000 	 ft 	 ( 	 3,658 	 m)
		operation: 	 + 	 40,000 	 ft 	 ( 	 12,192 	 m)
			MTBF  50 000hrs(221E2)  30 000hrs(221EL2)

   Environmental
   ROHS 		YES
			 EPEAT  Silver. (www.epeat.net)
   Packaging  100% recyclable
   Compliance and standards
				 Regulator y 	 Approvals		CE 	 Mark, 	 FCC 	 Class 	 B, 	 SEMKO, 	 TÜV/ 	
		GS, 	 TÜV 	 Ergo, 	 UL/cUL, 	 Energy 	 star 	 5.0
   Cabinet
   Color  Black/Black
			Finish  Glossy/Texture

 Note 
This data is subject to change without notice. 
Go to www.philips.com/suppor t to download the latest version of leaflet.

/,,
 
						

							21
4.1 Resolution & Preset Modes4.2 Automatic PowerSaving
If	you 	have 	VESA 	DPM 	compliance 	display 	card	
or  software  installed  in  your  PC,  the  monitor  can 
automatically reduce its power consumption when 
not  in  use.  If  an  input  from  a  keyboard,  mouse  or 
other  input  device  is  detected,  the  monitor  will 
'wake  up'  automatically. The  following  table  shows 
the  power  consumption  and  signaling  of  this 
automatic	power	saving	feature: 
	 Maximum	Resolution
For	221E2/221EL2
  1920 x 1080 at 60 Hz (analog input) 
 1920 x 1080 at 60 Hz (digital input)
 Recommended Resolution
 For	221E2/221EL2
  1920 x 1080 at 60 Hz (digital input)
H. freq (kHz)ResolutionV. freq (Hz)
31.47 640x480 59.94 
37.88 800x600 60.32 
48.36 1024x768 60.00 
54.00 1152x864 60.00 
44.77 1280x720 59.86 
47.78 1280x768 59.87 
49.70 1280x800 59.81 
60.00 1280x960 60.00 
63.89 1280x1024 60.02 
47.71 1360x768 60.02 
55.47 1440x900 59.90 
55.94 1440x900 59.89 
75.00 1600x1200 60.00 
64.67 1680x1050 59.88 
65.29 1680x1050 59.95 
66.59 1920x1080 59.93 
74.04 1920x1200 59.95 
67.50 1920x1080 60.00 
Power	Management	DefinitionVESA	Mode	Video H-sync V-sync Power UsedLED color 
Active	ON YesYes221E2< 24 W (typ.)221EL2< 23.8 W (typ.)White
Sleep OFFNoNo< 0.5 W (typ.) White (blink) Switch OffOFF--< 0.5 W (typ.)OFF
 Note 
This data is subject to change without notice.       
The  following  setup  is  used  to  measure  power 
consumption on this monitor.
Native	resolution: 	1920	x	1080
Contrast:	50%
Brightness: 	250	nits
Color	temperature: 	6500k	with	full	white	pattern
Audio	(Off)
 
						

							22
5 Regulatory Information
Lead-free Product
Lead free display promotes 
environmentally sound recover y and 
disposal of waste from electrical and 
electronic equipment. Toxic substances 
like Lead has been eliminated and compliance 
with European community’s stringent RoHs 
directive mandating restrictions on hazardous 
substances in electrical and electronic equipment 
have been adhered to in order to make Philips 
monitors safe to use throughout its life cycle.
EPEAT (www.epeat.net)
“The	EPEAT	(Electronic	Product	
Environmental	 Assessment	Tool)	
program evaluates computer 
desktops, laptops, and monitors 
based on 51 environmental criteria 
developed through an extensive 
stakeholder consensus process 
suppor ted	by	US	EPA.
EPEAT	system	helps	purchasers	in	the	public	
and private sectors evaluate, compare and select 
desktop computers, notebooks and monitors 
based	on	their	environmental	attributes. 	EPEAT	
also provides a clear and consistent set of 
performance criteria for the design of products, 
and provides an oppor tunity for manufacturers to 
secure market recognition for effor ts to reduce 
the environmental impact of its products.”
Benefits	of	EPEAT
Reduce use of primar y materials
Reduce use of toxic materials
Avoid	the	disposal	of	hazardous	waste	EPEAT’S	
requirement that all registered products meet 
ENERGY	STAR’s	energy	efficiency	specifications, 	
means that these products will consume less 
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following 
standards 
•	 EN60950-1:2006	(Safety	requirement	of		
 Information Technology Equipment) 
•	 EN55022:2006	(Radio	Disturbance		 	
 requirement of Information Technology  
 Equipment) 
•	 EN55024:1998+A1:2001+A2:2003			
 (Immunity requirement of Information  
  Technology Equipment) 
•	 EN61000-3-2:2006	(Limits	for	Harmonic		
 Current Emission) 
•	 EN61000-3-3:1995+A1:2001+A2:2005		
	 (Limitation	of	 Voltage	Fluctuation 	and	Flicker)
 following provisions of directives applicable
•	 2006/95/EC	(Low	 Voltage	Directive)	
•	 2004/108/EC	(EMC	Directive)	
•	 2005/32/EC	(EuP	Directive, 	EC	No.			
 1275/2008 mplementing Directive for  
 Standby and Off mode power consumption)  
 and is produced by a manufacturing   
 organization on ISO9000 level. 
 The product also comply with the following  
 standards 
•	 ISO9241-307:2008	(Ergonomic	requirement, 		
	 Analysis	and	compliance	test	methods	for		
 electronic visual displays)  
•	 GS	EK1-2000:2009	(GS	mark	requirement)		
•	 prEN50279:1998	(Low	Frequency	Electric		
	 and	Magnetic	fields	for	 Visual	Display)	
•	 MPR-II	(MPR:1990:8/1990:10	Low	Frequency		
	 Electric	and	Magnetic	fields)	
This monitor is equipped with a function for saving 
energy	which	suppor ts	the	 VESA	Display	Power	
Management	(DPM)	standard. 	This	means	that	the	
monitor must be connected to a computer which 
suppor ts	 VESA	DPM. 	Time	settings	are	adjusted	
from the system unit by software.
 
						

							23
As	an	ENERGY	STAR® Par tner, 
we have determined that this 
product	meets	the	ENERGY	STAR® 
guidelines for energy efficiency.
 Note
We recommend you switch off the monitor when 
it is not in use for a long time.
VESA	StateLED IndicatorPower Consumption Normal  operationON	(Active)White221E2< 21.5 W (typ.)221EL2< 18 W (typ.) Power Saving	Alternative	2 One step
SleepSwitch OffWhite(blink) OFF< 0.5 W (typ.)< 0.5 W (typ.)
Federal Communications Commission (FCC) 
Notice (U.S. Only)
  This equipment has been tested and found  
  to comply with the limits for a Class B digital  
	 device, 	pursuant	to	Par t	15	of	the	FCC	
 Rules. These limits are designed to    
 provide reasonable protection against  
 harmful interference in a residential    
 installation. This equipment generates, uses  
 and can radiate radio frequency energy and,  
 if not installed and used in accordance with
 the instructions, may cause harmful    
 interference to radio communications.  
 However, there is no guarantee that   
 interference will not occur in a par ticular  
 installation. If this equipment does cause  
 harmful interference to radio or television  
 reception, which can be determined by  
 turning the equipment off and on, the user 
 is encouraged to tr y to correct the    
 interference by one or more of the following  
	 measures:
•	 Reorient	or	relocate	the	receiving	antenna. 	
•	 Increase	the	separation	between	the		
 equipment and receiver. 
•	 Connect	the	equipment	into	an	 outlet	on		
 a circuit different from that to which the  
 receiver is connected. 
•	 Consult	the	dealer	or	an	experienced	radio/	
 TV technician for help.
 Changes or modifications not expressly  
  approved by the par ty responsible for  
 compliance could void the user's authority  
 to operate the equipment.
Use	only	RF	shielded	cable	that	was	supplied	with	
the monitor when connecting this monitor to a 
computer device. 
To prevent damage which may result in fire or 
shock hazard, do not expose this appliance to rain 
or excessive moisture. 
THIS	CLASS	B	DIGITAL	 APPARATUS	MEETS	
ALL	REQUIREMENTS	OF	 THE	CANADIAN	
INTERFERENCE-CAUSING	EQUIPMENT	
REGULATIONS.FCC Declaration of Conformity
Declaration	of	Conformity	for	Products	Marked	
with	FCC	Logo,	
United States Only
This	device	complies	with	Par t	15	of	the	FCC	
Rules. Operation is subject to the following two 
conditions:	(1)	this	device	may	not	cause	harmful	
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation. Commission 
Federale de la Communication (FCC 
Declaration)
 Cet équipement a été testé et déclaré  
  conforme auxlimites des appareils    
 numériques de class B,aux termes de  
	 l'ar ticle	15	Des	règles	de	la	FCC . 	Ces	limites		
 sont conçues de façon à fourir une  
 protection raisonnable contre les    
 interférences nuisibles dans le cadre   
 d'une installation résidentielle. 
 
						

							24
 CET appareil produit, utilise et peut émettre  
 des hyperfréquences qui, si l'appareil  
 n'est pas installé et utilisé selon les consignes  
 données, peuvent causer des interférences  
 nuisibles aux communications radio. 
 Cependant, rien ne peut garantir l'absence  
 d'interférences dans le cadre d'une    
 installation par ticulière. Si cet appareil est la  
 cause d'interférences nuisibles pour la  
 réception des signaux de radio ou de  
 télévision, ce qui peut être décelé en fermant  
 l'équipement, puis en le remettant en  
 fonction, l'utilisateur pourrait essayer de  
 corriger la situation en prenant les mesures  
	 suivantes:
•	 Réorienter	ou	déplacer	l'antenne 	de		
 réception. 
•	 Augmenter	la	 distance	entre	l'équipement	et		
 le récepteur. 
•	 Brancher	l'équipement	sur	un	autre	circuit		
 que celui utilisé par le récepteur. 
•	 Demander	l'aide	du	marchand	ou	d'un		
 technicien chevronné en radio/télévision.
 Toutes modifications n'ayant pas reçu  
  l'approbation des ser vices compétents en  
 matière de conformité est susceptible  
 d'interdire à l'utilisateur l'usage du présent  
 équipement.
N'utiliser	que	des	câbles	RF	armés	pour	les	
connections avec des ordinateurs ou 
périphériques. 
CET	 APPAREIL	NUMERIQUE	DE	LA	CLASSE	
B RESPECTE TOUTES LES EXIGENCES DU 
REGLEMENT	SUR	LE	MATERIEL	BROUILLEUR	
DU	CANADA. 	
EN 55022 Compliance (Czech Republic Only)
Polish Center for Testing and Certification 
Notice
The equipment should draw power from a socket 
with an attached protection circuit (a three-
prong	socket).	All	equipment	that	works	together	
(computer, monitor, printer, and so on) should 
have the same power supply source.
The phasing conductor of the room's electrical 
installation should have a reser ve shor t-circuit 
protection device in the form of a fuse with a 
nominal	value	no	larger	than	16	amperes	(A).
To completely switch off the equipment, the 
power supply cable must be removed from the 
power supply socket, which should be located 
near the equipment and easily accessible.
A	protection	mark	"B"	confirms	that	the	
equipment is in compliance with the protection 
usage requirements of standards PN-93/T-42107 
and PN-89/E-06251.
 
						

							25
North Europe (Nordic Countries) Information
Placering/Ventilation 
VARNING:
FÖRSÄKRA	DIG 	OM 	ATT 	HUVUDBRYTARE	
OCH 	UTTAG 	ÄR 	LÄTÅTKOMLIGA, 	NÄR 	DU	
STÄLLER	DIN	UTRUSTNING	PÅPLATS.
Placering/Ventilation ADVARSEL: 
S Ø R G 	V E D 	P L A C E R I N G E N 	F O R , 	A T	NETLEDNINGENS	 STIK	OG	STIKKONTAKT	 ER	NEMT	TILGÆNGELIGE. 	
Paikka/Ilmankier to VAROITUS: 
SIJOITA	LAITE 	SITEN, 	ETTÄ 	VERKKOJOHTO	V O I D A A N 	TA R V I T TA E S S A 	H E L P O S T I	IRROTTAA	PISTORASIASTA. 	
Plassering/Ventilasjon ADVARSEL: N Å R	D E T T E 	U T S T Y R E T 	P L A S S E R E S , 	M Å	D U 	PA S S E 	P Å 	AT 	K O N TA K T E N E 	F O R	STØMTILFØRSEL	ER	LETTE	Å	NÅ.
BSMI Notice (Taiwan Only)
Ergonomie Hinweis (nur Deutschland)
Der 	von 	uns 	geliefer te 	Farbmonitor 	entspricht 	den	
in der "Verordnung über den Schutz vor Schäden 
durch Röntgenstrahlen" festgelegten Vorschriften. 
Auf	der	Rückwand	des	Gerätes	befindet	sich	
ein	 Aufkleber, 	der	auf	die	Unbedenklichkeit	der	
Inbetriebnahme hinweist, da die Vorschriften über 
die	Bauar t	von	Störstrahlern	nach	 Anlage	III	¤	5	
Abs.	4	der	Röntgenverordnung	erfüllt	sind. 	
Damit	Ihr	Monitor	immer	den	in	der	Zulassung	
geforder ten Wer ten entspricht, ist darauf zu 
achten, daß 
1.	 Reparaturen	nur	durch	Fachpersonal		
 durchgeführ t werden. 
2.  nur original-Ersatzteile verwendet werden. 
3.  bei Ersatz der Bildröhre nur eine    
  bauar tgleiche eingebaut wird. 
Aus	 ergonomischen	 Gründen	wird	empfohlen, 	die Grundfarben Blau und Rot nicht auf dunklem Untergrund  zu  verwenden  (schlechte  Lesbarkeit und	erhöhte 	Augenbelastung 	bei 	zu 	ger ingem	Zeichenkontrast	wären	die	Folge). 	Der  arbeitsplatzbezogene  Schalldruckpegel  nach DIN	45	635	beträgt	70dB	(A)	oder	weniger. 	
ACHTUNG:	BEIM	AUFSTELLEN	DIESES	GERÄTES	DARAUF	ACHTEN, 	DAß	NETZSTECKER	UND	NETZKABELANSCHLUß	LEICHT	ZUGÄNGLICH	SIND. 	
 
						

							26
China RoHS 
The People's Republic of China released a 
regulation	called	"Management	Methods	for	
Controlling Pollution by Electronic Information 
Products" or commonly referred to as China 
RoHS.	All	products	including	CRT	and	LCD	
monitor which are produced and sold for China 
market have to meet China RoHS request.
环保使用期限 
此标识指期限(十年),电子信息产品中含有的
有毒有害物质或元素在正常使用的条件下不
会发生外泄或突变,  电子信息产品用户使用该
电子信息产品不会对环境造成严重污染或对
其人身、 财产造成严重损害的期限．
 
						

							27
6 Customer care and warranty
Customer Care & Warranty
PLEASE	SELECT	 YOUR	COUNTRY/AREA	
TO	REVIEW	DETAILS	OF	 YOUR	WARRANTY	
COVERAGE
WESTERN EUROPE  
Austria	/	Belgium	/	Denmark	/	France	/	
Germany	/	Greece	/	Finland	/	Ireland	/	Italy	/	
Luxembourg / the Netherlands / Norway / 
Por tugal / Sweden / Switzerland / Spain / 
United	Kingdom	/	Poland
EASTERN EUROPE  
Czech Republic / Hungar y / Russia / Slovakia /  
Slovenia / Turkey
LATIN AMERICA
Argentina	/	Brasil
NORTH AMERICA 
Canada	/	USA
PACIFIC
Australia	/	New	Zealand
ASIA 
China	/	Hong	Kong	/	India	/	Indonesia	/	Korea	/	
Malaysia	/	Pakistan	/	Philippines	/	Singapore	/	
Taiwan / Thailand / Vietnam
AFRICA 
South	Africa
MIDDLE EAST 
United	 Arab	Emirates
What is covered? 
The	Philips	F1rst	Choice	 Warranty	applies	within	
Andorra,	Austria, 	Belgium, 	Cyprus,	Denmark, 	
France,	Germany, 	Greece,	Finland,	Ireland,	
Italy,	Liechtenstein, 	Luxembourg,	Monaco,	the	
Netherlands, Norway, Poland, Por tugal, Sweden, 
Switzerland, 	Spain	and	the	United	Kingdom	
and only for monitors originally designed, 
manufactured, approved and/or authorized for 
usage within these countries.
Warranty coverage begins as from the day you 
buy	your	monitor. 	For	two	years	thereafter, 	your	
monitor will be swapped by at least an equivalent 
monitor in case of defects provided for under the 
warranty coverage.
The swap monitor remains yours and Philips 
keeps	the	defective/original	monitor. 	For	the	swap	
monitor the warranty period remains equal to 
that of your original monitor, being 24 months as 
from the purchase date of your original monitor.
Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor.
All	Philips	monitors	are	designed	and	
manufactured to high standards and 
deliver high-quality performance, ease 
of use and ease of installation. Should 
you encounter any difficulties while 
installing or using this product, please contact 
the Philips helpdesk directly to benefit from your 
Philips	F1rst	Choice	Warranty.	This	two-year	
ser vice warranty entitles you to a swap model 
on-site if your monitor turns out to be faulty or 
defective. Philips aims at a swap within 48 hours 
of your call being received.
 
						

							28
What is excluded?
The	Philips	F1rst	Choice	Warranty	applies	
provided the product is handled properly for its 
intended use, in accordance with its operating 
instructions and upon presentation of the 
original invoice or cash receipt, indicating the 
date of purchase, dealer's name and model and 
production number of the product.
The	Philips	F1rst	Choice	Warranty	may	not	apply	
if:
•	 The	documents	have	been	altered	in	any	way		
 or made illegible; 
•	 The	model	or	 production	number	on	the		
 product has been altered, deleted, removed  
 or made illegible; 
•	 Repairs	or	product	modifications	and	
 alterations have been executed by    
 unauthorized ser vice organizations or  
 persons; 
•	 Damage	is	caused	by	accidents	including	but		
 not limited to lightning, water or fire, misuse  
 or neglect; 
•	 Reception	problems	caused	by	signal		
 conditions or cable or antenna systems  
 outside the unit; 
•	 Defects	caused 	by	abuse	or	misuse	of	the		
 monitor ;
•	 Product	requires	modification	or 	adaptation		
 to enable it to comply with local or national  
 technical standards, which apply in countries 
 for which the product was not originally  
 designed, manufactured, approved and/or  
 authorized. Therefore always check whether  
 a product can be used in a specific countr y.
•	 Note	that	products	that	are	not	 originally		
 designed, manufactured, approved and/or  
	 authorized	for	usage	within	the	Philips	F1rst		
 Choice countries, do not apply to the Philips  
	 F1rst	Choice	 Warranty.	In	these	cases	the		
 Philips global warranty terms are valid. 
Just a click away
In case of any problems, we advise you to read 
the operating instructions carefully or go to the 
www.philips.com/suppor t website for additional 
suppor t. 
Just a phone call away
In order to avoid unnecessar y inconvenience, 
we advise you to read the operating instructions 
carefully or go to the www.philips.com/suppor t 
website for additional suppor t before contacting 
the Philips helpdesk.
To solve your problem quickly, please prepare 
the following details before contacting the Philips 
helpdesk:
•	 Philips	type	number
•	 Philips	serial	number
•	 Purchase	date	 (copy	of	purchase	may	be		
 required)
•	 PC	environment	Processor :
 o CUP and Graphic card name and driver  
    version 
 o Operating system 
 o	 Application	being 	used	
•	 Other	cards	installed
Having the following information available will also 
help	speed	up	the	process:
•	 Your	proof	of	purchase	indicating: 	date	of		
 purchase, dealer name, model and product  
 serial number.
•	 The	full	address	to	which	the	faulty	monitor		
 has to be collected and the swap model  
 should be delivered.
Philips' customer help desks are located 
worldwide. 		Click	here	to	access	the	F1rst	Choice	
Contact Information.
Or	you	can	reach	us	via:
Website:	http://www.philips.com/suppor t