Philips 220t1sb User Manual

							
EN-10
ENGLISH
FRANÇAISE
ESPAÑOL

5. 
This section helps you perform basic TV operations. 
Switch your TV on/off or to standby
5.1 
To Switch the TV on
If the standby indicator is off, press 
• 
 .  POWER  
at the side of the TV. 
If the standby indicator is on, press
•  . on the 
remote control.
To Switch to standby
Press •  . on the remote control.
To switch on from standby without the remote 
control. Press •  . POWER  at the side of the TV to 
switch the TV off.  
Press •  . POWER  again to switch the TV on.  
To switch off Press •  . POWER  at the side of the TV.
5.2 Watch TV
Switch channels
Press a number (1 to 9) or press 
•  CH  on 
your remote control.
Press •  to return to the previously viewed 
TV channel.
1 ~ 9
Note 
 
D
You can also switch channels by pressing 
CHANNEL    at the side of the TV.
Adjust volume Press •  VOL+/- on your remote control.
Press •  MUTE
  on your remote control to mute 
the sound.  Press  MUTE again or press  VOL+/- 
to restore the sound.
Note 
 
D
You can also switch volume by pressing 
VOLUME +/- at the side of the TV.
32:(5
POWER
/ 
/ 
PRE CH 
Switch on and set up
 
						

							
EN-11
ENGLISH
FRANÇAISE
ESPAÑOL
Watch channels from a cable receiver 
5.3 
box
Switch on the cable receiver box.  
1. 
The picture from your cable receiver box might 
appear automatically on your screen.
Use the remote control of your cable receiver 
2. 
box to select channels.
If the picture does not appear Press 1.  SOURCE repeatedly to select the 
connected cable receiver box and wait a few 
seconds for the picture to appear.
Press 2.  OK.
Use the remote control of your cable receiver 
3. 
box to select channels.
Watch a DVD
5.4 
Insert a DVD disc in your player.
1. 
Press 2.  Play > on the remote control of your 
player.
The picture from the player might appear 
automatically on your screen.
If the picture does not appear Press 1.  SOURCE repeatedly to select the correct 
source and wait a few seconds for the picture 
to appear.
Press 2.  OK.
 
						

							
EN-12
ENGLISH
FRANÇAISE
ESPAÑOL
More about the installation 
6.  
This section describes the advanced features of your 
TV.
Remote control 
6.1 overview
12
3 4
5
6
78
9
10
11
12
13
. 
1.  POWER  
Switches the TV on from standby or back to 
standby.
SOURCE
2.   
Selects connected devices.
DUALI-II
3.   
Selects Mono, Stereo, Dual I, Dual II, Nicam 
Mono, Nicam Stereo, Nicam Dual I, Nicam Dual 
II.
Note 
 
D
The sound mode selections depend on TV 
program and broadcast TV channel of that region.
OOM
4.    CURSOR BUTTONS  
5.  Î  ï Í  Æ 
To navigate through the menus.
6.   
CH  /
7.   
Switches to the next or previous channel.
NUMBER BUTTONS 
8. 
Selects a channel, page or setting.
9.  PRE  CH   Returns to the previously-viewed channel.
10. 
11.  Increases or decreases volume.
MUTE 
12.  Mutes or restores sound.
MENU13.   
Toggles the menu on or off. OK 
Press to activate a setting.
 
Sets the TV to turn itself off within a certain 
time.
SLEEP
VOL +/- 
zSelects a picture zoom.   
   
1514
14.  PICTURE 
Toggles to select the picture setting.
15.  SOUND  
Toggles to select the Sound audio setting.
 
						

							
EN-13
ENGLISH
FRANÇAISE
ESPAÑOL
Use install menu
6.2 
This section describe how to set the language and 
store the channel of the TV.
Press 1.  MENU on the remote control to display 
the main menu.
Press 2.  Î or ï to select  Install and press  Æ to 
enter it.
Press 3.  Î or ï  to highlight the item you want to 
adjust and press Æ  to confirm the change.
Press 4.  MENU to exit.
Summary of install settings Language
•   - Select a language of your interface.
Auto store
•   - Automatically sets up the TV for 
the broadcast or cable channels available in your 
area.
Note 
 
D
Immediately after unpacking and plugging in your 
new television, run the auto store function to set 
up the TV for the broadcast or cable channels 
available in your area.  If you do not run the 
auto store function to set up the channels, your 
television may not operate properly. 
After you have run auto store, check out the 
results.  Press CH  /  on the remote control and 
see which channels you can select. 
Remember, an antenna or cable TV signal must  first be connected to your TV.
Manual store
•   - 
Manual store
•  : Activates auto search channel 
frequency or press number keys to show your 
desired channel frequency.
Prog. no
•  : Use  Î or ï to adjust the channel 
number in the manual store menu.
Finetune
•  : Manually fine tunes analogue 
channels when reception is poor.
Store
•  : Stores or sets the setting of manual 
store menu.
Channel setting
•   - 
Channel edit
•  : Sets up a favorite list of your 
own with preferred TV channels.
Channel swap
•  : Exchange the channel.  Toggle 
between  From, To , and  Exchange.
Name edit
•  : Assigns or changes a channel 
name to a channel for which a name has not 
yet been used.
Press 1.  Î or ï to edit name and press  Æ to 
move to the next character.
Press2.   Í   to confirm the first character and 
press   Æ to confirm the last character.
Press  
3.  Æ to confirm the name.
Channel sort
•  : Sorts or groups channels.
Factory reset
•   - Allows you to reset most of 
the picture and sound settings to their default 
factory levels.  Select  No or Ye s.
Note 
 
D
If you reset the TV to the factory settings, all 
your present setting on picture, sound, and other 
feature settings will be erased and replaced by 
the manufacture’s default settings.  However, your 
auto lock access code will not be erased.
 
						

							
EN-14
ENGLISH
FRANÇAISE
ESPAÑOL
Change Video settings
6.3 
Change video settings
This section describes how to adjust your picture 
settings. Press 1.  MENU on the remote control. 
Press 2. ï or Æ to select the Video menu.
Press 3.  Î or ï to select the one of the video 
settings, and press  Æ to enter the setting.
Press 4.  Î or ï to adjust the setting, and press 
OK to confirm the change.
Press 5.  MENU to exit.
Summary of  video settings
The following picture settings can be configured. 
Depending on the format of the picture source, some 
picture settings might not be available.
Contrast
•   - Sets the level of white in the picture.
•  Brightness  - Sets the brightness of the picture.
Color temp
•   - Sets the color temperature to 
Normal,  Warm or  Cool.
Size
•   - Changes the format of the  size.
6.4  Press 1.  on the remote control 
to set your TV to a predefined picture and sound 
setting.
Press 2.  Î or ï to select one of the following 
settings:
Personal
•   - The customized settings you defined 
by using the  Picture menu.  
Vivid
•   - Vivid picture settings and clear sound for 
high action.
Standard
•   - For normal TV viewing.
Movie
•   - Brilliant picture settings for a cinematic 
experience.  
•   - Eco friendly settings for lower   consumption.
PRE SET MODE 
Eco power
Use Preset
 
						

							
EN-15
ENGLISH
FRANÇAISE
ESPAÑOL
Change picture format
Press 1.  M on the remote control to enter 
the  Picture format menu.
2.  Toggle the " " button on the RC to select
OOz
   the format that is best fit in with your contents.
Set the 
6.5 sleeptimer
Sleeptimer switches the TV to standby after a defined 
period of time.
Press 1.   on the remote control and select 
Sleeptimer.
SLEEP
  one of 
30,45,60,90,120  minutes 
Reduce the 
6.6 NR
This section describes how to filter out and reduce 
the image noise and improves picture quality when 
receiving weak video signals.
Press1.   HDMI  
> NR.
Press 2.  Æ to enter the list.
Press 3.  Î or ï to select on or off.
Press 4.  MENU to exit., then 
on the remote control
  MENU  
Video 
 and select 
Use your TV as a PC monitor
6.7 
Using a VGA cable connects a PC to your TV as a PC 
monitor.
Caution  
B
Before you connect your PC, set the PC monitor 
refresh rate to 60Hz.
Supported 
6.7.1. screen  resolutions
The following screen resolutions are supported in 
PC mode:  1600 x 900 is recommended resolution.
E
Resolution Refresh rate
640 x 480 
800 x 600 
1024 x 768 
1280 x 720 
1280 x 768 
1360 x 768 
1280 x 1024 60Hz, 72Hz, 75Hz 
60Hz, 56Hz, 72Hz, 75Hz
60Hz, 70Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz, 72Hz
1400 x 900 
1600 x 900  60Hz, 70Hz 
60Hz 
200T1:
640 x 480 
800 x 600 
1024 x 768 
1280 x 720 
1280 x 768 
1360 x 768 
1280 x 102460Hz, 72Hz, 75Hz 
60Hz, 56Hz, 72Hz, 75Hz
60Hz, 70Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz, 72Hz
1400 x 900 
1680 x 1050 
1920 x 1080 60Hz, 75Hz 
60Hz 
60Hz
Resolution
Refresh rate
1920 x 1080 is recommended resolution. 
E
220T1:
640 x 480 
800 x 600 
1024 x 768 
1280 x 720 
1280 x 768 
1360 x 768 
1280 x 1024
60Hz, 72Hz, 75Hz 
60Hz, 56Hz, 72Hz, 75Hz
60Hz, 70Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz 
60Hz, 75Hz, 72Hz
1400 x 900 
1680 x 1050 
1920 x 1080 60Hz, 75Hz 
60Hz 
60Hz
Resolution
Refresh rate
1920 x 1080 is recommended resolution. 
E
230T1:
Select your TV in PC mode
6.8 
Press1.   MENU on the remote control and select 
Features >  Source list.
Select 2.  PC and press  OK to confirm your choice.
If necessary, adjust the picture settings as 
3. 
described in  Change picture settings section. 
Press 4.  MENU to exit.
Tip 
 
E
Set the picture format to Full screen or 4:3 in PC 
mode.
,
MOO
z
 
						

							
EN-16
ENGLISH
FRANÇAISE
ESPAÑOL
Connect devices
7. 
7.1 Connection overview
Rear connectors
HDMI 
1. 
HDMI input connectors for DVD players, 
digital receivers, game consoles and other high-
definition devices.
PC IN 
2. 
VGA, Audio connectors for PC.
CVI 
3. 
Component video input (Y Pb Pr) and Audio L/R 
connectors for DVD, digital receiver or game 
console, etc.  
Antenna input / 75
4.  Ω Side connectors
Headphones
5.   
Stereo Mini Jack.
AUDIO L/R
6.   
Audio L/R input connectors for composite and 
S-Video devices.
VIDEO IN
7.   
Video input cinch connector for composite 
devices.
S-VIDEO
8.   
S-Video input connector for S-Video devices.
SIDE AV
5
6
7
8
L-AUDIO-R
VIDEO IN
S-VIDEO
75ΩANT75ΩANT
   
						

							
EN-17
ENGLISH
FRANÇAISE
ESPAÑOL
Select connection quality
7.2 
This section describes how you can enhance your 
audio visual experience by connecting your devices 
with the best possible connectors. 
HDMI - Highest quality 
7.2.1. 
HDMI produces the best audio visual quality possible.  
Both audio and video signals are combined in one 
HDMI cable, providing an uncompressed, digital 
interface between your TV and HDMI devices.  You 
must use HDMI to experience full high-definition 
video.
Tip 
 
E
If the device only with a DVI connector, use a 
DVI-HDMI adaptor to connect your device to a 
HDMI connector at the back of the TV.  You must 
connect a separate audio cable from the device 
to the AUDIO L/R at SIDE AV.
Component (Y Pb Pr) - Higher quality
7.2.2. 
 
Component (Y Pb Pr) video provides better picture 
quality than S-Video or composite video connections. 
Though component video supports high-definition 
signals, picture quality is lower than HDMI and is 
analogue.  Also, connect a Audio L/R cable to the 
red and white Audio L/R input connectors at CVI 1/
CVI 2.
Component video cable 
-Red, Green, Blue Audio L/R cabke 
-Red, White
S-Video - Good quality 
7.2.3. 
An analogue connection, S-Video provides better 
picture quality than composite video. When 
connecting your device with S-Video, plug the 
S-Video cable to the S-Video connector on the side 
of the TV.  You must connect a separate Audio L/R 
cable from the device to the red and white Audio L/R 
connectors on the side of the TV.
S-Video Audio L/R cabke 
-Red, White
Composite - Basic quality 
7.2.4. 
Composite video provides basic analogue 
connectivity, usually combining a (yellow) video cinch 
cable with (red and white) Audio L/R cinch cable.  
Match the cable colors when connecting to the 
composite Video and Audio L/R input connectors on 
the side of the TV.
Composite audio/video cable 
-Yellow, Red, White
 
						

							
EN-18
ENGLISH
FRANÇAISE
ESPAÑOL
Connect devices
7.3 
This section describes how to connect a selection of 
devices with different connectors. Note that different 
types of connectors may be used to connect a device 
to your TV.  The following sections describe examples 
only, other configurations are possible.
When connecting composite or component cables, 
match the cable colors to the connectors on the TV.
Caution 
 
C
Disconnect the AC power cord before 
connecting devices.
Note 
 
D
Different types of connectors may be used 
to connect a device to your TV depending on 
availability and your needs.
Connect a cable receiver box with RF In/
Outputs antenna TV
Cable Receiver BoxCABLE IN TO TV AUDIO
OUT
L
R
VIDEO
OUT S-VIDEO
ACable TV signal
B
OR
  Connect a cable receiver box with Audio/Video 
output
Cable TV signal
Cable Receiver BoxA
C
CABLE IN
AUDIO
OUT
L
R
VIDEO
OUT S-VIDEO
 
B
VIDEO IN
S-VIDEO L - AUDIO - R
SIDE AV
 
Connect  VCR, DVD player, or other devices 
with RCA connectors
AV Player with A/V Connectors
AUDIO
OUT
L
R
VIDEO
OUT S-VIDEO
 
B
A
VIDEO IN
S-VIDEO L - AUDIO - R
SIDE AV
 
75ΩANT
 
						

							
EN-19
ENGLISH
FRANÇAISE
ESPAÑOL
75ΩANT
75ΩANT
Connect DVD player or other video devices 
with component video connectors
Accessory Device Equipped with 
Component Video Outputs
YPb
PrL-AUDIO-R
A
B
Connect DVD player with a HDMI connector
DVD Player
A
Connect PC (monitor) with a VGA connector
Computer
A
B
75ΩANT