Philips 220t1sb User Manual

							
Register your product and get support at
www.philips.com/welcome
EN USER MANUAL
220T1
200T1
230T1
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Q41G22TM813 2A
 
						

							
EN-1
ENGLISH
FRANÇAISE
ESPAÑOL
Know these  
             safety symbols
This “bolt of lightning” indicates 
uninsulated material within your unit  
may cause an electrical shock. For the 
safety of everyone in your household, 
please do not remove product covering.
The “exclamation point” calls attention 
to features for which you should read 
the enclosed literature closely to prevent 
operating and maintenance problems.
 
WARNING: To reduce the risk of fire or electric 
shock, this apparatus should not be exposed to rain 
or moisture and objects filled with liquids, such as 
vases, should not be placed on this apparatus.
CAUTION:  To prevent electric shock, match wide 
blade of plug to wide slot, fully insert.
 
 For Customer Use
  Enter below the Serial No. which is located  
  on the rear of the cabinet. Retain this 
  information for future reference.
 Model No._______________________ 
  Serial No.  _______________________
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.  We’ll 
do everything in our power to keep you happy 
with your purchase for many years to come.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
We lco me
 
						

							
EN-2
ENGLISH
FRANÇAISE
ESPAÑOL
Important safety instructions
1. 
Read before operating equipment
Read 
1.  and keep these instructions.
Heed all warnings.
2. 
Follow all instructions.
3. 
Do not insert any strange object into the ventilation 
4. 
slots.This might lead to damage of the TV.
Do not use this apparatus near water.
5. 
Clean only with a dry cloth.
6. 
Do not block any of the ventilation openings. 
7.  
Install in accordance with the manufacturers 
instructions.
Do not install near any heat sources such as radiators, 
8. 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or 
9. 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and third grounding prong. The wide 
blade or third prong are provided for your safety. When 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or 
10. 
pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the 
11. 
manufacturer.
12.  Use only with a cart, stand, tripod, bracket, or  table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to 
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when 
13. 
unused for long periods of time.
Refer all servicing to qualified service personnel. 
14. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been 
dropped.
This product may contain lead or mercury. Disposal of 
15. 
these materials may be regulated due to environmental 
considerations. For disposal or recycling information, 
please contact your local authorities or the Electronic 
Industries Alliance:  www.eiae.org. 
Damage Requiring Service - The appliance should be 
16. 
serviced by qualified service personnel when:
The power supply cord or the plug has been 
• 
damaged; 
Objects have fallen, or liquid has been spilled into 
• 
the appliance;
The appliance has been exposed to rain
• ; The appliance does not appear to operate normally 
• 
or exhibits a marked change in performance; 
The appliance has been dropped, or the enclosure 
• 
damaged.
Tilt/Stability - All televisions must comply with 
17. 
recommended international global safety standards for 
tilt and stability properties of its cabinet design.
Do not compromise these design standards by 
• 
applying excessive pull force to the front, or top, 
of the cabinet which could ultimately overturn the 
product.
Also, do not endanger yourself, or children, by 
• 
placing electronic equipment/toys on the top of the 
cabinet. Such items could unsuspectingly fall from 
the top of the set and cause product damage and/
or personal injury.
Wall or Ceiling Mounting - The appliance should be 
18. 
mounted to a wall or ceiling only as recommended by 
the manufacturer.
Power Lines - An outdoor antenna should be located 
19. 
away from power lines.
Outdoor Antenna Grounding - If an outside antenna is 
20. 
connected to the receiver, be sure the antenna system 
is grounded so as to provide some protection against 
voltage surges and built up static charges.
Object and Liquid Entry - Care should be taken so that 
21. 
objects do not fall and liquids are not spilled into the 
enclosure through openings.
Battery Usage CAUTION - To prevent battery leakage 
22. 
that may result in bodily injury, property damage, or 
damage to the unit:
Install all batteries correctly, with + and - aligned as 
• 
marked on the unit.
Do not mix batteries (old and new or carbon and 
• 
alkaline, etc.).
Remove batteries when the unit is not used for a 
• 
long time.
For ventilation, leave at least 4” to 6” free all around 
23. 
the TV. Do not place the TV on a carpet.
The equipment shall not be exposed to dripping or 
24. 
splashing.
The equipment shall not be exposed to rain or 
25. 
moisture and objects filled with liquids, such as vases, 
shall be placed on the apparatus.
The apparatus must be connected to a mains socket 
26. 
outlet with a protected earthed connection. 
The appliance coupler is used as the disconnect device 
27. 
of this apparatus, the disconnect device shall remain 
readily operable.
 
						

							
EN-3
Philips reser ves the right to change 
products at any time without being 
obliged to adjust earlier supplies 
accordingly.
The material in this manual is believed 
adequate for the intended use of the 
system.  If the product, or its individual 
modules or procedures, are used for 
purposes other than those specified 
herein, confirmation of their validity 
and suitability must be obtained.  Philips 
warrants that the material itself does not 
infringe any United States patents.  No 
fur ther warranty is expressed or implied.
Philips can’t be held responsible neither 
for any errors in the content of this 
document nor for any problems as a 
result of the content in this document.  
Errors repor ted to Philips will be adapted 
and published on the Philips suppor t 
website as soon as possible.
Pixel characteristics
The LCD panel has a high number of 
colour pixels.  Although it has effective 
pixels of 99.999% or more.  Black dots or 
bright points of light (red, green or blue) 
may appear constantly on the screen.  
This is a structural proper ty of display 
(within common industrial standard ) and 
is not a malfunction.  This does not affect 
the performance of the product.
Safety symbols 
Know these safety symbols:
CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
 This “bolt of lightning” 
indicates uninsulated material 
within your unit may cause an 
electrical shock. For the safety 
of ever yone in your household, please do 
not remove product covering.
 The “exclamation point” calls 
attention to features for 
which you should read the 
enclosed literature closely to 
prevent operating and 
maintenance problems.
If the TV is mounted on a swivel base or 
swivel arm, ensure no strain is placed on 
the power cord when the TV is swivelled.  
Strain on the power cord can loosen 
connections.  This may cause arcing and 
result in fire.
ENGLISH
2009 © Koninklijke Philips Electronics   
N.V. All rights reser ved. Specifcations   
are subject to change without notice.   
Philips and the Philips Shield Emblem   
are registered trademarks of Koninklijke   
Philips Electronics N.V. and are used   
under license from Koninklijke Philips   
Electronics N.V.  www.philips.com
. 
 
						

							
EN-4
ENGLISH
FRANÇAISE
ESPAÑOL
Table of contents
1.  Important safety instructions  . . . . . . . . .   2
2. Important   . . . . . . . . . . . . . . . . . . . . . . . . .   5
2.1  Product information . . . . . . . . . . . . . . . . . . . . . . .   5
2.2  Screen care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
2.3  Environmental care. . . . . . . . . . . . . . . . . . . . . . . .   5
2.4  Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . .   5
3.  Your LCD Monitor with HD/Full HD  TV tuner  . . . . . . .    6
3.1  TV overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6
3.2  Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . .   6
4.  Get started . . . . . . . . . . . . . . . . . . . . . . . .   7
4.1  Position . . . . . . . . . . . . . . . . . . . . . . . . . . .    7
4.2  Wall mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7
4.3     Connect to your PC
  . . . . . . . . .
 . . . . . . . . . . . . 8
4.5  Connect the antenna or cable . . . . . . . . . . . . . . .   8
4.6  Connect the AC power cord. . . . . . . . . . . . . . . .   9
4.7  Switch on the TV . . . . . . . . . . . . . . . . . . . . . . . . .   9
4.8  Manage cable  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9
5.    Switch on and set up
 10
5.1  Switch your TV on/off or to standby . . . . . . . . .   10
5.2  Watch TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10
5.3  Watch channels from a cable receiver box . . . .   11
5.4  Watch a DVD. . . . . . . . . . . . . . . . . . . . . . . . . . .   11
6. 
6.1  Remote control overview  . . . . . . . . . . . . . . . . .   12
6.2  Use install menu . . . . . . . . . . . . . . . . . . . . . . . . .   13
6.3  Change picture and sound settings . . . . . . . . . .   14
6.4  Use Preset mode  . . . . . . . . . . . . . . . . . . . . .. . .   14
6.5  Set the sleeptimer  . . . . . . . . . . . . . . . . . . . . . . .   16
6.6  Reduce the NR. . . . . . . . . . . . . . . . . . . . . . . . . .   16
6.7  Use your TV as a PC monitor . . . . . . . . . . . . . .   16
6.8   Select your TV in PC mode . . . . . . . . . . . . . . . .    16
7.  Connect devices . . . . . . . . . . . . . . . . . . .   17
7.1  Connection overview. . . . . . . . . . . . . . . . . . . . .   17
7.2  Select connection quality . . . . . . . . . . . . . . . . . .   18
7.3  Connect devices . . . . . . . . . . . . . . . . . . . . . . . . .   19
8.  Glossary. . . . . . . . . . . . . . . . . . . . . . . . . .   21
9.  Troubleshooting  . . . . . . . . . . . . . . . . . . .   22
9.1  Technical specifications  . . . . . . . . . . . . . . . . . . .   23
10.  Index  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   24
More about the installation   
 . . . . . . . . . . . 12
. . . . . . . . . . . . . . . .  . . . . . . .  . . . . . . . 
 . . . . . . .  . 
 . . . . . 
4.4  Install the remote control batteries  . . . . . . . . . .   8  . . 
 
						

							
EN-5
ENGLISH
FRANÇAISE
ESPAÑOL
Important
2. 
Product information
2.1 
The model and serial number are on the rear of the 
TV and on the packaging.
This TV consumes minimal energy in standby mode 
to minimise environmental impact.  The active power 
consumption is given on the type plate at the rear of 
the TV. 
 
Screen care
2.2 
Turn off and unplug the AC power cord before 
• 
cleaning the screen.
Clean the screen with a soft, dry cloth.  Do not 
• 
use substances such as household cleaning agents 
as these may damage the screen.
To avoid deformations or color fading, wipe off 
• 
water droplets as soon as possible.
Do not touch, push, rub or strike the screen 
• 
with hard objects as this may damage the screen 
permanently.
Where possible, avoid stationary images that 
• 
remain on-screen for extended periods of time.  
If you must use stationary images, reduce the 
screen contrast and brightness to avoid screen 
damage.
Environmental care
2.3 
End of life directives - Recycling
Philips has paid a lot of attention to 
producing an environmentally friendly product.  
Your new TV contains several materials that can 
be recycled for new uses.  At the end of its life, 
specialized companies can dismantle and recycle this 
set.  This will minimize the amount of materials being 
disposed of.  Please be sure to dispose of this set in 
accordance with all state and local regulations.
Recycling your packaging
The packaging of this product is intended to 
be recycled. Contact your local authorities for 
information on how to recycle the packaging.
Disposing used batteries
The supplied batteries do not contain mercury 
or cadmium. Dispose supplied and all other used 
batteries according to your local regulations.
Power consumption
The TV consumes minimal energy in standby mode 
to minimise environmental impact.  Active power 
consumption is displayed at the back of the TV. 
 
Regulatory notices
2.4 
WARNING 
 
BTo reduce the risk of fire or electric shock, this 
apparatus should not be exposed to rain or 
moisture.  Objects filled with liquids, such as 
vases, should not be placed on this apparatus.
75ΩANT
2.5  The most updated user manual online
The contents of the user manual are subject to
change. Please refer to www.philips.com/support
for the most updated user manual info reference.
  
						

							
EN-6
ENGLISH
FRANÇAISE
ESPAÑOL
This section gives you an overview of commonly-
used TV controls and functions.
TV overview
3.1 
Side controls and indicators
CHANNEL MENU
VOLUME
POWER
5 4
3
2
1
POWER
1. 
CHANNEL +/-
2. 
MENU3. 
VOLUME +/-
4. 
Remote control sensor/ power indicator
5. 
Side connectors
Use the TV side connectors to connect to mobile 
devices such as a camera or game console.  You can 
also connect to the headphone.
Rear connectors
Cable
Use the TV rear connectors to connect to the antenna and permanent devices such as a high-
definition disc player or DVD player.
Note 
 
D
For more information about connections, see 
Section 7 Connect devices.
3.2 Remote control
12
3
4
5 6
7
8
9
Standby / ON
1. 
SOURCE
2.  selection 
Picture buttons
ZOOM
4.  button
C
5. ursor buttons
Channel selection
6. 
Volume selection
7. 
MENU button
8. 
OK button
9. 
For more information about the remote control, See 
Remote control over view  section.
75ΩANT
75ΩANT
3. 
3. Your LCD Monitor with HD/
Full HD  TV
   
						

							
EN-8
ENGLISH
FRANÇAISE
ESPAÑOL
Open the battery cover on the back of the 
1. 
remote control.
Insert the 2 batteries supplied.  Make sure the  
2. 
+ and - ends of the batteries line up correctly. 
(inside of case is marked).
Close the cover.
3. 
Connect the antenna or cable
4.
5 

Connect to an antenna
Locate the TV ANTENNA connector on the 
1. 
back of the TV.
Connect one end of an antenna cable (not 
2. 
supplied) to the TV ANTENNA connectors.  Use 
an adaptor if the antenna cable does not fit.
Connect the other end of the antenna cable to 
3. 
your antenna outlet, ensuring that the cable is 
tightly secured at both ends.
Firmly pull the stand from the bottom of the 2. 
TV. Place both the stand and bolts in a secure 
location for future reinstallation. 
Step 3 Connect cables
Connect the antenna cable, AC power cord and all 
other devices to the back of the TV as described in 
the following sections and in  Section 7 Connect devices.
Step 4 Secure the VESA-compatible wall 
bracket to the TV
Warning  
B
Only use the specified bolts (M4 x 10mm) 
to secure the VESA-compatible wall 
bracket to your TV.  The specified bolts are 
designed to match the weight of your TV.
Note 
 
D
Depending on your VESA-compatible wall 
bracket, you may need to separate the mounting 
plate from the wall bracket for easier installation. 
Refer to your VESA-compatible wall bracket 
documentation for instructions. 
Install the remote control 
4.4 batteries
AAA
x 2
75ΩANT100x100 mm100x100 mm
75ΩANT
75ΩANT
75ΩANT
Computer
A
B
Connect to your PC
4.3 
    
						

							
EN-9
ENGLISH
FRANÇAISE
ESPAÑOL
S-Video and Audio
• 
YPbPr (Component Video Input)
• 
HDMI• 
Connect a cable receiver box through 
component video input or HDMI
Connect the 
4.
6  AC power cord

Warning  
 
B
Verify that your voltage corresponds with 
the voltage printed at the back of the TV.  
Do not insert the AC power cord if the 
voltage is different. To connect the AC power cord
Locate the power connector at the back of the 
1. 
TV.
The location of the power connector varies 
according to TV model. 
Insert the AC power cord fully into the TV 
2. 
power connector.
Connect the AC power cord plug to the power 
3. 
outlet. Ensuring that the cord is tightly secured 
at both ends.
4.7  Switch on the TV
Before you switch on the TV, check that the mains 
cord is properly connected.  Press  POWER button 
at the side of the TV, or press power button on 
the remote control.  The TV normally takes 10-15 
seconds to start up and the following screen appears 
the first time you turn on the TV. 
Manage cable
4.
8 

Route your AC power cord, antenna cable and all 
other device cables through the cable holder at the 
back of the TV.  The holder helps keep your cables 
tidy and easily manageable.
$&,1
POWER
75ΩANT
75ΩANT
75ΩANT
75ΩANT
Connect to a cable receiver box
A cable receiver box can be connected to the TV 
through the following connections: ANTENNA (75
•  Ω)
A/V (Composite Video and Audio)
• 
$8,2,1
Cable Receiver Box
ANTENNA
75ΩANT75ΩANT