Philips 220s2s User Manual

							
EN  User manual   1
 
Customer care and warranty   32
 
  Troubleshooting & FAQs   44
220S2
220S2
plus
www.philips.com/welcome
 
						

							
Table of Contents
1  Important
1.1   Safety precautions and maintenance   ...............  1
1.2
  Notational Descriptions   .........................................  2
1.3
  Disposal of product and packing material....  3
2
  Setting up the monitor
2.1
  Installation   .......................................................................  4
2.2
  Operating the monitor   ...........................................  5
2.3
  Remove Base Stand and Base   .............................  7
3
  Product information
3.1
  Smar tImage   ....................................................................  9
3.2
  Smar tContrast   ............................................................. 10
3.3
  Smar tSaturate   .............................................................. 11
3.4
  Smar tSharpness   .......................................................... 11
3.5
  Philips Smar tControl Premium   .......................... 12
3.6
  Philips Pixel Defect Policy   ...................................... 20
4
  Technical Specifications   ................................. 22
4.1
  Resolution & Preset Modes.................................. 25
4.2
  Automatic PowerSaving   .......................................... 25
5
  Regulatory Information   ................................. 26
6
  Customer care and warranty   ...................... 32
7
  Troubleshooting & FAQs
7.1
  Troubleshooting   .......................................................... 44
7.2
  Smar tControl Premium FAQs   ............................ 46
7.3
  General FAQs   .............................................................. 48
 
						

							
1
This electronic user’s guide is intended for anyone 
who uses the Philips monitor. Take time to read 
this user manual before you use your monitor. 
It contains impor tant information and notes 
regarding operating your monitor.
The Philips guarantee applies provided the 
product is handled properly for its intended use, 
in accordance with its operating instructions and 
upon presentation of the original invoice or cash 
receipt, indicating the date of purchase, dealer’s 
name and model and production number of the 
product.
1.1
 
Safety precautions and maintenance

 
Warnings
Use of controls, adjustments or procedures other 
than those specified in this documentation may 
result in exposure to shock, electrical hazards 
and/or mechanical hazards.
Read and follow these instructions when 
connecting and using your computer monitor.
Operation
•	 Keep
	 the 	 monitor 	 out 	 of 	 direct 	 sunlight 	 and 	 	
  away from stoves or any other heat source.
•	 Remove
	 any 	 object 	 that 	 could 	 fall 	 into 	 	
  ventilation holes or prevent proper cooling   
  of the monitor’s electronics. 
•	 Do
	 not 	 block 	 the 	 ventilation 	 holes 	 on 	 the 	 	
  cabinet.
•	 When
	 positioning 	 the 	 monitor, 	 make 	 	
  sure the power plug and outlet are easily   
  accessible.
•	 If
	 turning 	 off 	 the 	 monitor 	 by 	 detaching 	 the 	 	
  power cable or DC power cord, wait for 6   
  seconds before attaching the power cable or   
  DC power cord for normal operation.
•	 Please
	 use 	 approved 	 power 	 cord 	 provided 	
  by Philips all the time. If your power cord   
  is missing, please contact with your local   
  ser vice center. (Please refer to Customer   
  Care Consumer Information Center)
1. Important
•	 Do 	 not 	 subject 	 the 	 monitor 	 to 	 severe 	 	
 
vibration or high impact conditions during   
 
operation.
•	 Do
	 not 	 knock 	 or 	 drop 	 the 	 monitor 	 during 	 	
 
operation or transpor tation.
Maintenance
•	 To
	 protect 	 your 	 monitor 	 from 	 possible 	 	
 
damage, do not put excessive pressure on   
	 the
	 LCD 	 panel. 	 When 	 moving 	 your 	 monitor, 	 	
 
grasp the frame to lift; do not lift the 
 
monitor by placing your hand or fingers on   
 
the LCD panel.
•	 Unplug
	 the 	 monitor 	 if 	 you 	 are 	 not 	 going 	 to 	 	
 
use it for an extensive period of time.
•	 Unplug
	 the 	 monitor 	 if 	 you 	 need 	 to 	 clean 	 it 	 	
 
with a slightly damp cloth. The screen may   
 
be wiped with a dr y cloth when the power is 
 
off. However, never use organic solvent, such   
 
as, alcohol, or ammonia-based liquids to   
 
clean your monitor.
•	 To
	 avoid 	 the 	 risk 	 of 	 shock 	 or 	 permanent 	 	
 
damage to the set, do not expose the   
 
monitor to dust, rain, water, or excessive   
 
moisture environment.
•	 If
	 your 	 monitor 	 gets 	 wet, 	 wipe 	 it 	 with 	 dr y 	 	
 
cloth as soon as possible. 
•	 If
	 foreign 	 substance 	 or 	 water 	 gets 	 in 	 your 	
 
monitor, please turn the power off   
 
immediately and disconnect the power cord.   
 
Then, remove the foreign substance or   
 
water, and send it to the maintenance center.
•	 Do
	 not 	 store 	 or 	 use 	 the 	 monitor 	 in 	 	
 
locations exposed to heat, direct sunlight or   
 
extreme cold.
•	 In
	 order 	 to 	 maintain 	 the 	 best 	 performance 	 	
 
of your monitor and use it for a longer   
 
lifetime, please use the monitor in a location   
 
that falls within the following temperature   
 
and humidity ranges. 
  
o Temperature: 0-40°C 32-95°F
  o  Humidity: 20-80% RH
 
						

							
2
•	 IMPORTANT:
	
Always
	
activate
	
a
	
moving
	
	
 
screen saver program when you leave your 
 
 
monitor unattended. Always activate a 
 
 
periodic screen refresh application if your 
 
 
monitor will display unchanging static 
 
 
content. Uninterrupted display of still or 
 
 
static images over an extended period may 
 
cause “burn in”, also known as “after-imaging” 
 
or “ghost imaging”,  on your screen. 
 
"Burn-in", "after-imaging", or "ghost imaging" is a 
 
 
well-known phenomenon in LCD panel 
 
 
technology. In most cases, the “burned 
 
 
in” or “after-imaging” or “ghost imaging” will 
 
 
disappear gradually over a period of time 
 
 
after the power has been switched off. 

 
Warning
Severe” burn-in” or “after-image” or “ghost image” 
symptoms will not disappear and cannot be 
repaired. The damage mentioned above is not 
covered under your warranty.
Service
•	 The
	 casing 	 cover 	 should 	 be 	 opened 	 only 	 by 	 	
  qualified ser vice personnel.
•	 If
	 there 	 is 	 any 	 need 	 for 	 any 	 document 	 for 	 	
  repair or integration, please contact with   
  your local ser vice center. (please refer to the   
  chapter of "Consumer Information Center") 
•	 For
	 transpor tation 	 information, 	 please 	 refer 	 	
  to "Technical Specifications". 
•	 Do
	 not 	 leave 	 your 	 monitor 	 in 	 a 	 car/trunk 	 	
  under direct sun light.

 Note
Consult a ser vice technician if the monitor does 
not operate normally, or you are not sure what 
procedure to take when the operating instructions 
given in this manual have been followed.

1.2   Notational Descriptions
The following subsections describe notational 
conventions used in this document. 
Notes,
	 Cautions 	 and 	 Warnings
Throughout this guide, blocks of text may be 
accompanied by an icon and printed in bold or 
italic type. These blocks contain notes, cautions or 
warnings. They are used as follows:

  Note
This icon indicates impor tant information and tips 
that help you make better use of your computer 
system.
  Caution
This icon indicates information that tells you how 
to avoid either potential damage to hardware or 
loss of data.

  Warning
This icon indicates the potential for bodily harm 
and tells you how to avoid the problem.
Some warnings may appear in alternate formats 
and may not be accompanied by an icon. In such 
cases, the specific presentation of the warning is 
mandated by the relevant regulator y authority.
 
						

							
3
1.3
 
Disposal of product and packing 
 
 
material
Waste Electrical and Electronic Equipment-
WEEE

This marking on the product or on its packaging 
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic 
appliances, this product may not be disposed 
of with normal household waste. You are 
responsible for disposal of this equipment through 
a designated waste electrical and electronic 
equipment collection. To determine the locations 
for dropping off such waste electrical and 
electronic, contact your local government office, 
the waste disposal organization that ser ves your 
household or the store at which you purchased 
the product.
Your new monitor contains materials that can be 
recycled and reused. Specialized companies can 
recycle your product to increase the amount of 
reusable materials and to minimize the amount to 
be disposed of. 
All redundant packing material has been omitted. 
We
	 have 	 done 	 our 	 utmost 	 to 	 make 	 the 	 packaging 	
easily separable into mono materials.
Please find out about the local regulations on how 
to dispose of your old monitor and packing from 
your sales representative. 

Recycling Information for Customers
There is currently a system of recycling up and 
running in the European countries, such as The 
Netherlands, Belgium, Norway, Sweden and 
Denmark.
In Asia Pacific, Taiwan, the products can be taken 
back by Environment Protection Administration 
(EPA) to follow the IT product recycling 
management process, detail can be found in web 
site www.epa.gov.tw
The monitor contains par ts that could cause 
damage to the nature environment. Therefore, it is 
vital that the monitor is recycled at the end of its 
life cycle. 
For help and ser vice, please contact Consumers 
Information Center or F1rst Choice Contact 
Information Center in each countr y. 
 
						

							
4
2.1
 
Installation

 
Package contents
220S2/220S2  plus
2.
  Setting up the monitor

 Install base stand
220S2
1.
  Place the monitor face down a smooth   
  surface taking care to avoid scratching or   
  damaging the screen.
2.
  Hold the monitor base stand with both   
  hands and firmly inser t the base stand into   
  the base column. 220S2
 plus
1.   Place the monitor face down a smooth   
  surface taking care to avoid scratching or   
  damaging the screen.
2.   Hold the monitor base stand with both   
  hands and firmly inser t the base stand into   
  the base column.
3.   Attach the monitor base stand to the base   
  column then fasten base stand.
 Caution
Do not release the height adjustment pin lock   
from the base column before the base stand is 
firmly fixed.

Monitor
Quick start guideBase stand
EDFU CD
Power cord VGA signal cable (optional)  DVI cable (optional)
Register your product and get support at 
www.philips.com/welcome
220S2Monitor LCD / Monitor LCD / LCD-Monitor / Monitor 
LCD / LCD监视器 / РК-монитор / LCD-монитором
Quick star t guideInstallation / Installation / Instalación / Installation / Installazione /  安装 / Інсталяція  
/  Установка
Connect / Connectivité / Conectividad / Verbindungsfähigkeit / Connettività / 
连接性 / Підключитися / Подключиться  
Adjust ergonomic / Réglages ergonomiques / Ajustes ergonómicos / Ergonomische / 
Einstellmöglichkeiten / Regolazioni ergonomiche /  人体工程学调整 / 
Регулювати ергономічне  / Настройка  эргономики Guide de démarrage rapide / Guía rápida / Kurzanleitung / Guida rapida / 
快速入门指南  / Швидке керівництво для початку експлуатації / 
Краткое руководство по запуску 
LCD Monitor 
Philips and the Philips’ Shield Emblem are registered trademarks of 
Koninklijke Philips Electronics N.V. and are used under license from 
Koninklijke Philips Electronics N.V.    © 2010 Koninklijke  Philips  Electronics, N.V.All  rights reserved.  Unauthorized  duplication  is a violation  of applicable laws. Made and printed in China.  Version M2220S  5B.0V601.001

CLICK!

DON’T
DON’T

DON’T

DON’T
CLICK!
 
						

							
5

 Connecting to your PC
 
 
 
 
  Kensington 	 anti-thief 	 lock
 
  AC power input
 
  DVI-D input (available for selecting   
      model)
 

  VGA input
Connect to PC
 
1 .
 
  Connect the power cord to the back of   
      the monitor firmly.
 
2 .
 
  Turn off your computer and unplug its   
      power cable.
 
3.
   Connect the monitor signal cable to the    
      video connector on the back of your   
      computer.
 
4 .
 
  Plug the power cord of your computer   
      and your monitor into a nearby outlet.
 
5 .
 
  Turn on your computer and monitor.   
      If the monitor displays an image,    
      installation is complete.
2.2
 
Operating the monitor

  Front view product description
   : To access the OSD menu
  : Return to previous OSD level
   : dim down to 60% of brightness level   
    by one touch

  : To switch monitor’s power ON and OFF
   : To adjust brightness of this monitor  
: To adjust the OSD menu

   :  There are six modes to be selected. 
    Office, Photo, Movie ,Game,   
    Economy, and Off

 Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips 
LCD monitors. It allows an end user to adjust screen 
performance or select functions of the monitors 
directly through an on-screen instruction window. A 
user friendly on screen display interface is shown as 
below:
Basic and simple instruction on the control keys
In the OSD shown above users can press 

 
buttons 
at the front bezel of the monitor to move the cursor,  
OK to confirm the choice or change.

432
43
2
1

67
5
4213

67
5
4213
 
						

							
6

 Physical Function
 
Tilt
Swivel 
Height adjustment 

  Note
Remove the height adjustment pin lock before 
adjusting the height.
Inser t the height adjustment pin lock before lifting 
the monitor.
The OSD Menu
Below is an overall view of the structure of the 
On-Screen Display. You can use this as a reference 
when you want to work your way around the 
different adjustments later on.

Main menu
Input Sub menu
VGA
DVI (available for selective models)
Picture Picture Format 
- 4:3, Wide screen
Brightness
Contrast
Color Color Temp. 
-  5000K, 6500K, 7500K, 8200K, 9300K, 11500K
sRGB
Language English, Español, Fran
çais, Deutsch, Italiano
Português, PycckИЙ,  簡體中文
User Define      Red
 
    Green
      Blue
SmartContrast 
-  On, Off
OSD Settings Horizontal
Vertical
Transparency 
-  Off, 1, 2, 3, 4
OSD Time out  -  5, 10, 20, 30, 60
Gamma 
-  1.8, 2.0, 2.2, 2.4, 2.6
Setup Power LED 
-  0, 1, 2, 3, 4
H. Position  -  0 ~ 100
Resolution Notification   -  On, Off
Reset  -  Yes, No
V. Position 
-  0 ~ 100
Information Phase  -  0 ~ 100
Clock  -  0 ~ 100

Auto

 Resolution notification
This monitor is designed for optimal performance 
at its native resolution, 1680x1050@60Hz. 
When
	 the 	 monitor 	 is 	 powered 	 on 	 at 	 a 	 different 	
resolution, an aler t is displayed on screen: Use 
1680x1050@60Hz for best results.
Display of the native resolution aler t can be 
 
switched off from Setup in the OSD (On Screen 
Display) menu.
 

-65 65
70mm

-6565
70mm

(220S2/220S2
 plus
)
(220S2  plus
)
(220S2
 plus
)
 
						

							
7
2.3
 
Remove Base Stand and Base
 

 
Remove the Base Stand
220S2
Place the monitor face on a safe surface, release 
the stand lock and pull the base stand away from 
 
the base column.
220S2  plus
Before you star t disassembling the monitor base, 
please follow the instructions below to avoid 
damage or injur y.
1.
  Extend the monitor base to its maximum   
  height.

-65 65
70mm

2.
  Place the monitor face down on a smooth   
 
surface, taking care to avoid scratching or   
 
damaging the screen. Then lift the monitor   
 
stand.
3.
  Release the lock of base stand then pull the   
 
base stand away from the base column.

DON’T
DON’T

DON’T
 
						

							
8

 Note
This monitor accepts a 100mm x 100mm   
VESA-Compliant mounting interface.  
 Remove the Base
Condition:
•
  For VESA standard mounting applications
220S2/
220S2  plus
1.
  Remove the 8 screw covers.
2.
  Remove the 4 screws and then remove the   
  base from the monitor.

220S2

100mm
100mm